| Price | 9.590,00 kn (1.272,81 €) 8.990,00 kn (1.193,18 €) | 1.609,00 kn (213,55 €) 1.449,00 kn (192,32 €) | 979,00 kn (129,94 €) 879,00 kn (116,66 €) | 2.149,00 kn (285,22 €) 1.949,00 kn (258,68 €) | 18.299,00 kn (2.428,69 €) 16.499,00 kn (2.189,79 €) | 2.149,00 kn (285,22 €) 1.949,00 kn (258,68 €) |
| Description | Features
New 38mm chassis for increased stiffness and rider confidence
Highly-tunable DebonAir™ air spring offers a buttery smooth feel off the top and maintains a higher ride height for increased confidence in steep terrain
Our highest performing Charger technology. Charger 2.1 RC2 damper features independent high and low speed compression with rebound adjustment – designed to reduce hand fatigue and fight unwanted friction, the Charger 2.1 damper increases confidence and control over every trail
Ultra-low friction SKF wiper seals provide long-lasting fork performance and improve overall suspension feel
Maxima Plush damping fluid reduces friction and silences damper noise
Available in the Signature Colorway Slab Grey or Ultimate High Gloss Black with foil graphics
Short fender compatible (RockShox fender sold separately)
Some variations of this product featured on this page are not available for purchase and are installed on bicycles as complete bikes only. See your dealer for details.
| Key Features
- 10, 11 and 12 speed compatible
- Sealed Stainless Steel cartridge bearings
- Hub shell machined from a single forged aluminium billet
- Standard 6 bolt disc fitting
- 4 Pawl ratchet system with 44 tooth engagement (8.2 deg)
- Larger spoke flange to enable stiffer wheel builds
- Unsurpassed reliability
- Available in 148 x 12mm thru axle
Pro 4 Boost 148mm rear hub Tech Specs >
- Now available with Shimano MicroSpline freehub body
- Specifically designed for 148 x 12mm frames with hub flanges move outboard 3mm compared to standard Pro 4 rear hub increasing complete wheel stiffness
- Available Black, Silver, Red, Blue, Purple and Orange
- Available in 28, 32 and 36 hole drillings
- Machined from forged 2014 T6 Aluminium billet
- Conversions available for 141 x QR and 148 x 12mm
- Supplied with freehubs to suit 10/11spd Shimano, 12 Speed MicroSpline, Sram XD or Hope cassette
- Aluminium or steel Shimano freehub body options
- Weight: 311g (36 hole, Shimano)
Pro 4 Rear Freehub Exploded View
Pro 4 148 Boost Rear Hub Exploded View
Pro 4 Rear MicroSpline Freehub Exploded View
How to convert a Pro 4 Rear hub
[embed]https://vimeo.com/255879229[/embed]
How to service a Pro 4 Rear hub
[embed]https://vimeo.com/255880722[/embed]
| The Nukeproof Horizon Carbon Riser Bar was developed to be lightweight and comfortable, while far exceeding the strength and durability of an aluminium bar. In fact, the Horizon carbon bar far exceeds the strength of many leading carbon bar competitors in laboratory testing, withstanding loads of over 700kg.
High Strength and Damping
This strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty!
Features:
Material: Carbon
Backsweep: 9°
Upsweep: 6°
Use: Trail, All Mountain, Enduro, Downhill, Freeride
Weight: 260g (800mm x 35mm rise)
[embed]https://www.youtube.com/watch?v=dakhvNE63PE&feature=emb_title&ab_channel=NukeproofBikes[/embed] | This enduro carbon rim with its 31mm internal width is an ideal position in the middle of the strength, to weight, to width range, it works with many tire sizes.
Specification:
| Item: |
MX938EN |
Use: |
Enduro, All mountain |
| Size: |
29" |
Rim type: |
Hookless |
| Material: |
Toray T700 carbon fiber |
Tubeless ready: |
Yes |
| Weight: |
500g+/-20 |
Weave: |
UD / 3K / 6K |
| Max rider weight: |
125kgs |
Finish: |
Matte / Gloss |
| Inner width:
|
31mm |
Depth:
|
23.5mm |
| Outer width: |
38mm |
ERD: |
598mm |
| Tire size: |
2.3"~3.0" |
Brake type: |
Disc |
| Spoke hole:
|
16 / 18 / 20 / 24 / 28 / 32 / 36 |
Assembly hole diameter: |
8.5mm |
| Valve hole diameter: |
6.5mm |
Max spoke tension: |
140kgf (recommended 110-130kgf) |
| Max / Min tire pressure:
|
60psi (4.1bar) / 25psi (1.75bar) |
Cycling tire pressure: |
40psi / 2.76bar (recommended max) |
| *Angled holes allows the nipple to pull straight in line with the spoke for reduced stress. This results in fewer broken spokes and nipples.
* For unique hole drilling and alternate options, please contact us for special orders.
* If you have any special requirement like rim in 3k twill, 6k, marble finish surface, custom painting etc., please contact us at sales@carbonalbike.com. Since we manufacture every single one of the rim in our own factory, we have the ability to get you our rims with custom finishes, hole counts, or graphics.
* Carbonal warrants its products to be free from manufacturing defects for a period of 5-years after original date of purchase.
And we understand that accidents and damage can happen, if in case of bad luck, Carbonal supports you by offering replacement product with 15% discount on the current price of products within 2 years. |
Features:
 |
One Piece Molding, a rim is made by one piece long carbon fiber, no wrinkles, to make the strength of rim is the strongest.
|
 |
Super Lightweight Tec, constructed with premium Toray T700 carbon fiber, precise layup, achieve a most lightweight.
|
 |
Hookless rim bead, more straight and smooth side walls, tire can touch rim walls fully. More durable and impact resistance compared to a clincher rim. |
 |
Double Triangle Design, rim cross-sections more smooth, make rim stronger and stabilized structure. |
| | Downhill 29er mtb carbon rim, 36mm inner width can fit wider mountain bike tyres. These downhill carbon rims feature strong, stiff, durable and compliant carbon rims designed for punishment.
Specification:
| Item: |
MX942DH |
Use: |
Downhill |
| Size: |
29" |
Rim type: |
Hookless |
| Material: |
Toray T700 carbon fiber |
Tubeless ready: |
Yes |
| Weight: |
600g±20 |
Finish: |
Matte / Gloss |
| Max Rider Weight: |
130kgs |
Weave: |
UD / 3K / 6K - [see different carbon weaves] |
| Inner Width:
|
36mm |
Depth:
|
25mm |
| Outer Width: |
42mm |
ERD: |
595mm |
| Tire Size: |
2.5"~2.8" |
Valve Hole Dia: |
6.5mm |
| Spoke Hole:
|
32H, center or 3mm offset |
Assembly Hole Dia: |
8.5mm |
| Max / Min Tire Pressure: |
60psi (4.1bar) / 25psi (1.75bar) |
Max Spoke Tension: |
140kgf (recommended 110-130kgf) |
| Cycling Tire Pressure: |
35psi / 2.41bar (recommended max) |
Standard: |
EN standard |
| * Angled holes allows the nipple to pull straight in line with the spoke for reduced stress. This results in fewer broken spokes and nipples.
* For unique hole drilling and alternate options, please contact us for special orders.
* If you have any special requirement like rim in 3k twill, 6k, marble finish surface, custom painting etc., please contact us at sales@carbonalbike.com. Since we manufacture every single one of the rim in our own factory, we have the ability to get you our rims with custom finishes, hole counts, or graphics.
* Carbonal warrants its products to be free from manufacturing defects for a period of 5-years after original date of purchase.
And we understand that accidents and damage can happen, if in case of bad luck, Carbonal supports you by offering replacement product
with 15% discount on the current price of products within 2 years. |
Features:
|
One Piece Molding, a rim is made by one piece long carbon fiber, no wrinkles, to make the strength of rim is the strongest.
|
|
Super Lightweight Tec, constructed with premium Toray T700 carbon fiber, precise layup, achieve a most lightweight.
|
|
Hookless rim bead, more straight and smooth side walls, tire can touch rim walls fully. More durable and impact resistance compared to a clincher rim. |
|
Double Triangle Design, rim cross-sections more smooth, make rim stronger and stabilized structure. |
|
| Content | Description
ZEB Ultimate is a whole new breed of fork, designed to challenge the limits and take on the world’s toughest Enduro tracks. Going Ultimate has its advantages. Featuring an all-new stiff 38mm chassis designed with the Charger 2.1 damper, DebonAir™ air spring technology, SKF Wiper Seals, and Maxima Plush Fluid. Our highest performing, athlete-proven technologies matched with premium style plays. An anodized crown and ZEB’s signature color – Slab Grey – make a rocking debut. | | | | Komercijalni opis
Float 40 vilice su prvi izbor DH trkača kao što su Greg Minnaar i Aaron Gwin, koji žele najviše od ovjesa.
Potpuno redizajnirana vilica Float 40 podiže standarde ovjesa u DH kategoriji! Cijev za uranjanje od 40 mm u kombinaciji s novim potkoljenicama, nadograđenom GRIP2 (samo tvornička serija) ili GRIP patronom i naravno novi grafički dizajn dovoljni su razlozi da ova vilica ostane najpopularnija među konkurentima u budućnosti.
Vilica je opremljena novom plutajućom osovinom od 20 mm, koja osigurava još veću krutost i posljedično smanjuje trenje tijekom rada ovjesa. Cijevi za uranjanje od 40 mm dodatno su obrađene izdržljivim i iznimno glatkim premazom Kashima (samo FACTORY serija). To, u suradnji sa zračnom oprugom Float EVOL, osigurava iznimno brz rad, koji u kombinaciji sa zračnim kanalom u donjim nogama vilice nudi nevjerojatno mekan rad već u prvom dijelu hoda. Zračni kanal također osigurava stalno podmazivanje cijelog sustava ovjesa, pa vilica dulje ostaje „svježa“. Cijeli paket upotpunjuje poznati GRIP2 uložak, koji je najpoželjniji među enduro i dh vozačima. Razlog je kvaliteta rada i prilagodljivost individualnim željama. Ove godine patrona je nadograđena patentiranom VVC tehnologijom koja pruža do sada neviđenu opciju za postavke "u letu" putem četiri vanjske tipke. Točku na i dodaju gumbi koji nude mogućnost izjednačavanja atmosferskog tlaka zbog visinske ili temperaturne razlike.
GRIP2 uložak
GRIP2 uložak je dizajniran za ventilaciju tijekom rada i stoga održava najvišu razinu performansi u svakom trenutku. Nudi veću potporu u sredini hoda, što sprječava gubitak hoda zbog kočenja s prednjom kočnicom. Novi uložak također ima značajno manje trenje, što dodatno poboljšava osjetljivost na manje neravnine.
GRIP2 uložak omogućuje čak četiri neovisne postavke. Na gornjem dijelu uloška nalaze se tipke za podešavanje brzog (8 razina) i sporog (16 razina) (HSC/LSC) kompresije a na donjem dijelu brzog (8 razina) i sporog (16 razina) povrata (HSR) / LSR) vilice.
Patentirana tehnologija varijabilne kontrole ventila (VVC) pruža revolucionarni pristup brzom povratnom podešavanju (HSR) i, od 2021. nadalje, kompresiju velikom brzinom prema sustavu promjene tvrdoće ventila. .).
Zračna opruga - Float EVOL
Zračna opruga Float EVOL ima veliku negativnu komoru, koja poboljšava odziv vilice u 1/3 hoda te na taj način smanjuje vibracije i doprinosi većoj udobnosti vožnje.
Float EVOL air spring omogućuje korištenje zračnih odstojnika pomoću kojih možete mijenjati volumen pozitivne zračne komore. To također mijenja rad ovjesa. Promjena volumena zračne komore utječe na rad ovjesa u drugoj polovici hoda.
PROBLEM: Ako je SAG pravilno postavljen, u potpunosti iskoristite cijeli hod i često "izgurajte" vilicu do dna.
RJEŠENJE: Umetnite više odstojnika kako bi ovjes bio progresivniji i posljedično bolje radio.
PROBLEM: Ako je SAG ispravno postavljen, nemojte koristiti cijeli hod.
RJEŠENJE: Uklonite odstojnike kako biste iskoristili cijeli hod. Kao rezultat toga, ovjes će raditi bolje.
Izvedba EVOL zračne opruge dodatno je poboljšana u kombinaciji sa zračnim kanalima i tipkom za izjednačavanje tlaka u potkoljenicama!
Jamstvo:
Svi Fox proizvodi imaju dvogodišnje jamstvo ako je proizvod servisiran nakon 125 sati korištenja, odnosno nakon godinu dana od kupnje proizvoda (što je ranije). Jamstvo se zadržava samo ako je proizvod servisiran u Općem servisnom centru FOX (Tvrtka CULT d.o.o. Logatec - www.cult.si).
Tehnički opis
Prikladno za veličine naplataka bicikla: 29 ″
Serija: Tvornica
Promjer cijevi za uranjanje: 40 mm
Grabulje: 52 mm
Hod: 203 mm
Uložak: FIT GRIP2 Tvornički
Osovina: 20 x 110 mm
Prikladno za bicikle s promjerom glavne cijevi: 1-1 / 8˝
Potopna pumpa za odvodnju: Kashima (omogućuje iznimno brz i gladak rad vilice.)
Podešavanje vilice: podešavanje SAG zraka, odskok niske brzine (9 razina) i velike brzine (8 razina), niske brzine (26 razina) i visoke brzine (22 razine) postavke kompresije
Vrsta opruge: FLOAT Air (mogućnost postavljanja progresivnog rada.)
Donje noge vilice od laganog, ali vrlo izdržljivog magnezija
Kočnice: disk kočnice (način montaže nakon postavljanja)
Maksimalni promjer kočionih rotora: 200 mm
Boja: narančasta
Preporučuje se za DH
Težina: 2,62 kg
ID dobavljača: 910-20-244 | |
Specification:
Recenzije
Još nema recenzija.