Akcija!

Nukeproof Horizon V2 Carbon Riser Bar (35mm)

879,00 kn (116,66 €)

The Nukeproof Horizon Carbon Riser Bar was developed to be lightweight and comfortable, while far exceeding the strength and durability of an aluminium bar. In fact, the Horizon carbon bar far exceeds the strength of many leading carbon bar competitors in laboratory testing, withstanding loads of over 700kg.

High Strength and Damping
This strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty!

Features:

Material: Carbon
Backsweep: 9°
Upsweep: 6°
Use: Trail, All Mountain, Enduro, Downhill, Freeride
Weight: 260g (800mm x 35mm rise)

 

TEČAJ: 1 EUR = 7,53450 HRK SKU: N/A Kategorije: , ,

Dodatne informacije

size

800mm 35.0mm 25mm

Recenzije

Još nema recenzija.

Budite prvi koji će recenzirati “Nukeproof Horizon V2 Carbon Riser Bar (35mm)”

Vaša adresa e-pošte neće biti objavljena. Obavezna polja su označena sa * (obavezno)

Quick Comparison

SettingsNukeproof Horizon V2 Carbon Riser Bar (35mm) removeFOX 22 Vilica 40 FLOAT 29 FS 203 GRIP2, 20×110 1,1/8˝ narančasta remove29er mtb MX935DH 35mm wide 23.5mm deep carbon rim - 540g removeFormula CURA 4 Black brake removePro 4 Boost 110mm Front Hub removeFormula CURA brake remove
Image
SKU
Rating
Price 879,00 kn (116,66 €) 16.499,00 kn (2.189,79 €) 1.949,00 kn (258,68 €) 1.259,00 kn (167,10 €) 602,00 kn (79,90 €) 899,00 kn (119,32 €)
Stock
Availability
Add to cart

Odaberi opcije

Dodaj u košaricu

Dodaj u košaricu

Dodaj u košaricu

Odaberi opcije

Dodaj u košaricu

DescriptionThe Nukeproof Horizon Carbon Riser Bar was developed to be lightweight and comfortable, while far exceeding the strength and durability of an aluminium bar. In fact, the Horizon carbon bar far exceeds the strength of many leading carbon bar competitors in laboratory testing, withstanding loads of over 700kg. High Strength and Damping This strength is due to the Nukeproof proprietary carbon layup and the addition of a unique layer of glass fibre for additional damping and reinforcement. Safety was the primary objective, in addition to providing the great ride quality only a high-end carbon bar can. Further safety is provided by the no-slip particle paint applied to the controls and stem mounting areas. Nukeproof are so confident in their Horizon carbon bar that they back it up with a lifetime warranty!

Features:

Material: Carbon Backsweep: 9° Upsweep: 6° Use: Trail, All Mountain, Enduro, Downhill, Freeride Weight: 260g (800mm x 35mm rise)   [embed]https://www.youtube.com/watch?v=dakhvNE63PE&feature=emb_title&ab_channel=NukeproofBikes[/embed]
This 29 inch carbon hookless rim is 35mm external width with reinforced side wall, supreme stiff, strong and impact resistance, which is perfect for freeride and downhill style riding.   Specification:
Item: MX935DH Use: Downhill, freeride
Size: 29" Rim type: Hookless
Material: Toray T700 carbon fiber Brake type: Disc
Weight: 540g±20 Weave: UD / 3K / 6K
Max Rider Weight: 135kgs Finish: Matte / Gloss
Inner Width: 29mm Depth: 23.5mm
Outer Width: 35mm ERD: 598mm
Tire Size:  2.3"~2.5" Tubeless ready:  Yes
Spoke Hole: 24 / 28 / 32 / 36 Assembly Hole Dia: 8.5mm
Valve Hole Dia: 6.5mm Max Spoke Tension: 140kgf (recommended 110-130kgf)
Max / Min Tire Pressure: 60psi (4.1bar) / 25psi (1.75bar) Cycling Tire Pressure: 40psi / 2.76bar (recommended max)
*Angled holes allows the nipple to pull straight in line with the spoke for reduced stress. This results in fewer broken spokes and nipples. * For unique hole drilling and alternate options, please contact us for special orders. * If you have any special requirement like rim in 3k twill, marble finish surface, custom painting etc., please contact us at sales@carbonalbike.com. Since we manufacture every single one of the rim in our own factory, we have the ability to get you our rims with custom finishes, hole counts, or graphics. * Carbonal warrants its products to be free from manufacturing defects for a period of 5-years after original date of purchase. And we understand that accidents and damage can happen, if in case of bad luck, Carbonal supports you by offering replacement product with 15% discount on the current price of products within 2 years.
Features:
One Piece molding One Piece Molding, a rim is made by one piece long carbon fiber, no wrinkles, to make the strength of rim is the strongest.
Super Lightweight Tec Super Lightweight Tec, constructed with premium Toray T700 carbon fiber, precise layup, achieve a most lightweight.
Hookless carbon rim Hookless rim bead, more straight and smooth side walls, tire can touch rim walls fully. More durable and impact resistance compared to a clincher rim.
Double Triangle Design Double Triangle Design, rim cross-sections more smooth, make rim stronger and stabilized structure.
 
BEYOND THE EXPECTATIONS With Cura 4 we set a very ambitious goal for ourselves, we tried to go beyond even our own expectations. Our direction was clear from the beginning, create a brake that had no equal in terms of power and performance, one that was made of the highest quality materials and was accessible to a vast number of riders. The four 18mm diameter pistons of the Cura 4 provide the rider with, up until now, unimaginable power. The expanded friction surface of the pads and the increased thickness guarantee perfect modulation. With Cura 4 you will be able to have maximum control over braking power. The optimized roll-back allows for reaching that exceptional lever feeling that has already made the Cura famous. The Cura 4 inherits its quality of materials from its smaller brother, Cura. In fact, it is a fully forged and anodized brake, a production process that guarantees structural quality, reliability over time and low weight.  

TECHNICAL SPECIFICATIONS

MASTER CYLINDER

  • Type - Axial - Forged aluminum
  • Body Finish - Glossy Black / Polished / Gold
  • Clamp Color - Matte Black / Glossy Black
  • Screws - Stainless Steel

LEVER BLADE

  • Material - Forged Aluminum
  • Color - Matte Black / Glossy Black

CALIPER

  • Type - PM6 with 4xØ18mm pistons
  • Body Finish - Glossy Black / Polished / Gold
  • Screws - High tensile steel
  • Pad type - Organic
  • Hose lenght - 175cm (both, front and rear)
  • Hose finish - Matte Black
  • Feeling Control System - Not compatible
  • Speed Lock - Optional / Caliper side only
  • MixMaster - Optional (Shimano I-Spec B or SRAM)
  • Rotors - All Compatible (6H & Center Lock)

SYSTEM WEIGHT  379g

With 85cm hose, 160mm 1-piece rotor and mounting hardware     The MixMaster handlebar clamp is an option for all Formula brakes. This simple upgrade allows for the direct attachment of Shimano (I-Spec B only) and SRAM shifters on your Formula brake, giving the bike a clean look. Perfect to help de-clutter handlebars busy with the many clamps today’s bikes employ.     Speed Lock technology allows for the disconnection and connection of the hose multiple times without losing fluid or introducing air into the brake. The Speed Lock hose is the best option for internally routed frames, the traveler who packs their bike, or anyone who is constantly assembling/disassembling their bike.     We are proud to introduce our new disc. After more than three years of development we have arrived at a design that combines the best of all the "must have" features in a disc: extreme lateral stiffness that guarantees impact resistance by protecting the disk from unwanted damage; reduced unwanted noise caused by friction; a special anti-noise design which reduces the risk of resonance and vibrations; reduced pad wear.    
 Shares the same benchmark quality as our standard Pro 4 front hub but in a wider design to suit Boost 110mm compatible forks.

Key Features

  • Sealed stainless Steel cartridge bearings
  • Hub shell machined from forged aluminium billet
  • Standard 6 bolt disc fitting
  • Larger spoke flange to enable stiffer wheel builds
  • Unsurpassed reliability
  • Available in both standard 15mm, 20mm and Torq end cap options

Pro 4 Boost 110mm Front hub Tech Specs

  • Hub flanges are moved outboard 5mm compared to the standard 100m front hub to increase wheel stiffness
  • Available Black, Silver, Red, Blue, Purple and Orange
  • Available in 28, 32 and 36 hole drillings
  • Machined from forged 2014 T6 Aluminium billet
  • Conversions available for 15mm Boost, 20mm Boost and Torq
  • Weight: 188g (32h option)
  • **Note**Boost 110mm front hub uses a different, wider hub body compared to the standard 100mm Pro 4 front hub
   

How to convert a Pro 4 Front hub

[embed]https://vimeo.com/255878799[/embed]    

How to service a Pro 4 Front hub

[embed]https://vimeo.com/255879653[/embed]
UNWAVERING POWER AND GREAT MODULATION The Cura is a clean, simple, and great riding brake designed to fit all riders and their bikes. The lever, designed for the human factor, is our most ergonomic and intuitive yet. With how capable mountain bikes have become at conquering any trail our caliper is proficient in taming the bike to overcome the trail. This new era of Formula disc brakes has given us the chance to change our status quo. The Cura is Formula’s first brake to use mineral oil. Our brake performance standards have always been out of the range for the inclusion of mineral oil. We have finally found and use a mineral oil that complements the performance of our brakes. The Formula Cura has been designed from top to bottom with riders in mind.  In our laboratory, and on the race track, we have confirmed that the Cura is an extremely powerfulwide range brake that feels comfortable from weekend warriors and Enduro riders to World Cup Downhill racers.  We believe that brakes are one of the most personal and intimate parts of the bike, this is why we have simplicity and efficiency in mind when we design it.  

TECHNICAL SPECIFICATIONS

MASTER CYLINDER

ContentKomercijalni opis Float 40 vilice su prvi izbor DH trkača kao što su Greg Minnaar i Aaron Gwin, koji žele najviše od ovjesa. Potpuno redizajnirana vilica Float 40 podiže standarde ovjesa u DH kategoriji! Cijev za uranjanje od 40 mm u kombinaciji s novim potkoljenicama, nadograđenom GRIP2 (samo tvornička serija) ili GRIP patronom i naravno novi grafički dizajn dovoljni su razlozi da ova vilica ostane najpopularnija među konkurentima u budućnosti. Vilica je opremljena novom plutajućom osovinom od 20 mm, koja osigurava još veću krutost i posljedično smanjuje trenje tijekom rada ovjesa. Cijevi za uranjanje od 40 mm dodatno su obrađene izdržljivim i iznimno glatkim premazom Kashima (samo FACTORY serija). To, u suradnji sa zračnom oprugom Float EVOL, osigurava iznimno brz rad, koji u kombinaciji sa zračnim kanalom u donjim nogama vilice nudi nevjerojatno mekan rad već u prvom dijelu hoda. Zračni kanal također osigurava stalno podmazivanje cijelog sustava ovjesa, pa vilica dulje ostaje „svježa“. Cijeli paket upotpunjuje poznati GRIP2 uložak, koji je najpoželjniji među enduro i dh vozačima. Razlog je kvaliteta rada i prilagodljivost individualnim željama. Ove godine patrona je nadograđena patentiranom VVC tehnologijom koja pruža do sada neviđenu opciju za postavke "u letu" putem četiri vanjske tipke. Točku na i dodaju gumbi koji nude mogućnost izjednačavanja atmosferskog tlaka zbog visinske ili temperaturne razlike. GRIP2 uložak GRIP2 uložak je dizajniran za ventilaciju tijekom rada i stoga održava najvišu razinu performansi u svakom trenutku. Nudi veću potporu u sredini hoda, što sprječava gubitak hoda zbog kočenja s prednjom kočnicom. Novi uložak također ima značajno manje trenje, što dodatno poboljšava osjetljivost na manje neravnine. GRIP2 uložak omogućuje čak četiri neovisne postavke. Na gornjem dijelu uloška nalaze se tipke za podešavanje brzog (8 razina) i sporog (16 razina) (HSC/LSC) kompresije a na donjem dijelu brzog (8 razina) i sporog (16 razina) povrata (HSR) / LSR) vilice. Patentirana tehnologija varijabilne kontrole ventila (VVC) pruža revolucionarni pristup brzom povratnom podešavanju (HSR) i, od 2021. nadalje, kompresiju velikom brzinom prema sustavu promjene tvrdoće ventila. .). Zračna opruga - Float EVOL Zračna opruga Float EVOL ima veliku negativnu komoru, koja poboljšava odziv vilice u 1/3 hoda te na taj način smanjuje vibracije i doprinosi većoj udobnosti vožnje. Float EVOL air spring omogućuje korištenje zračnih odstojnika pomoću kojih možete mijenjati volumen pozitivne zračne komore. To također mijenja rad ovjesa. Promjena volumena zračne komore utječe na rad ovjesa u drugoj polovici hoda. PROBLEM: Ako je SAG pravilno postavljen, u potpunosti iskoristite cijeli hod i često "izgurajte" vilicu do dna. RJEŠENJE: Umetnite više odstojnika kako bi ovjes bio progresivniji i posljedično bolje radio. PROBLEM: Ako je SAG ispravno postavljen, nemojte koristiti cijeli hod. RJEŠENJE: Uklonite odstojnike kako biste iskoristili cijeli hod. Kao rezultat toga, ovjes će raditi bolje. Izvedba EVOL zračne opruge dodatno je poboljšana u kombinaciji sa zračnim kanalima i tipkom za izjednačavanje tlaka u potkoljenicama! Jamstvo: Svi Fox proizvodi imaju dvogodišnje jamstvo ako je proizvod servisiran nakon 125 sati korištenja, odnosno nakon godinu dana od kupnje proizvoda (što je ranije). Jamstvo se zadržava samo ako je proizvod servisiran u Općem servisnom centru FOX (Tvrtka CULT d.o.o. Logatec - www.cult.si). Tehnički opis Prikladno za veličine naplataka bicikla: 29 ″ Serija: Tvornica Promjer cijevi za uranjanje: 40 mm Grabulje: 52 mm Hod: 203 mm Uložak: FIT GRIP2 Tvornički Osovina: 20 x 110 mm Prikladno za bicikle s promjerom glavne cijevi: 1-1 / 8˝ Potopna pumpa za odvodnju: Kashima (omogućuje iznimno brz i gladak rad vilice.) Podešavanje vilice: podešavanje SAG zraka, odskok niske brzine (9 razina) i velike brzine (8 razina), niske brzine (26 razina) i visoke brzine (22 razine) postavke kompresije Vrsta opruge: FLOAT Air (mogućnost postavljanja progresivnog rada.) Donje noge vilice od laganog, ali vrlo izdržljivog magnezija Kočnice: disk kočnice (način montaže nakon postavljanja) Maksimalni promjer kočionih rotora: 200 mm Boja: narančasta Preporučuje se za DH Težina: 2,62 kg ID dobavljača: 910-20-244ad
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
size

800mm 35.0mm 25mm

color

Black, Blue, Orange, Purple, Red, Silver

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping