...     385 91 505 1959
0
No products in the cart.

RHYOLITE 2 SAFETY JACKET

  1. Home
  2. Trgovina
  3. BIKE SHOP
  4. ODJEĆA I OBUĆA
  5. štitnici za tijelo
  6. RHYOLITE 2 SAFETY JACKET
sale

RHYOLITE 2 SAFETY JACKET

SKU: 203879689.

kn2,219.00 kn1,999.00

Clear
Add to wishlist

The most advanced upper body armour for gravity use. It provides protection from back to the chest with superior breathability and comfort.

The result from extensive research into the movement of the human body, the Rhyolite 2 Safety Jacket is Dainese’s most ergonomic and advanced design to date and the pinnacle of upper body armor available today. Advancing Dainese’s use of functional patterns inspired by nature, this jacket features Flexagon protection coverage from the back to the chest, resulting in superior breathability, comfort and protection. With removable sleeves utilizing Dainese’s Pro Armor elbow and shoulder pads, the Rhyolite 2 is an adaptable to address each rider’s needs.

CHARACTERISTICS

Removable sleeves

HOMOLOGATION

CE EN 1621.1

CE EN 1621.2 Level 2

MAIN MATERIALS

Crash Absorb soft memory foam

MATERIALS

  • Jersey hole Highly Breathable
  • Run-Resistant mesh

PERFORMANCE SHOCK

  • Crash Absorb chest and rib pads
  • Flexagon Technology back protector
  • Pro Armor elbow pads
  • Pro Armor shoulder pads

SIZE GUIDE

SAFETY GEAR

 

CENTIMETRES
SIZE XS S M L XL XXL
CHEST 81–87 87–93 93–99 99–105 105–111 111–117
WAIST 69–75 75–81 81–87 87–93 93–99 99–105
HIP 83–89 89–95 95–101 101–107 107–113 113–119
HEIGHT 163–167.5 167.5–172 172–176 176–180 180–184 184–188
INSEAM 76–78 78–80 80–82 82–84 84–85 85–86
ARM 56–57 57–58.5 58.5–60 60–61 61–62 62–64
INCHES
SIZE XS S M L XL XXL
CHEST 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 43.7–46.1
WAIST 27.2–29.5 29.5–31.9 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3
HIP 32.7–35.0 35.0–37.4 37.4–39.8 39.8–42.1 42.1–44.5 44.5–46.9
HEIGHT 64.2–65.9 65.9–67.7 67.7–69.3 69.3–70.9 70.9–72.4 72.4–74.0
INSEAM 29.9–30.7 30.7–31.5 31.5–32.3 32.3–33.1 33.1–33.5 33.5–33.9
ARM 22.0–22.4 22.4–23.0 23.0–23.6 23.6–24.0 24.0–24.4 24.4–25.2

 

BACK PROTECTORS

(WAIST TO SHOULDER MEASUREMENT)

CENTIMETRES
SIZE XS S M L XL XXL
ARMOFORM MANIS 48 48 48 52 52 52
RHYOLITE 2 47 47 47 47 51 51
RHYOLITE 2 LITE 47 47 47 47 51 51
RIVAL VEST PRO 47 47 47 47 51 51

 

INCHES
SIZE XS S M L XL XXL
ARMOFORM MANIS 18.9 18.9 18.9 20.5 20.5 20.5
RHYOLITE 2 18.5 18.5 18.5 18.5 20.1 20.1
RHYOLITE 2 LITE 18.5 18.5 18.5 18.5 20.1 20.1
RIVAL VEST PRO 18.5 18.5 18.5 18.5 20.1 20.1

 

KNEE PROTECTORS

CALF (10 cm below the knee cap) – THIGH (20 cm above the knee cap)

CENTIMETRES
SIZE S M L XL
CALF CIRCUMFERENCE 33 36 39 42
THIGH CIRCUMFERENCE 47 52 54 59

 

INCHES
SIZE S M L XL
CALF CIRCUMFERENCE 13.0 14.2 15.4 16.5
THIGH CIRCUMFERENCE 18.5 20.5 21.3 23.2

 

ELBOW PROTECTORS

FOREARM (10 cm below the elbow) – BICEPS (15 cm above the elbow)

CENTIMETRES
SIZE S M L XL
FOREARM CIRCUMFERENCE 27 28 29 31
BICEPT CIRCUMFERENCE 29 31 32 34

 

INCHES
SIZE S M L XL
FOREARM CIRCUMFERENCE 10.6 11.0 11.4 12.2
BICEPT CIRCUMFERENCE 11.4 12.2 12.6 13.4

 

Category: BIKE SHOP dainese odjeća ODJEĆA I OBUĆA štitnici za tijelo

Additional Information

Color

Black
Size

XS, XXL, S, M, L, XL

Recenzije

Još nema recenzija.

Samo logirani kupci koji su kupili ovaj proizvod mogu napisati recenziju.

Related Products

  • sale

    AWA BLACK – PANTS

    kn1,109.00 kn999.00

    The perfect recipe for an all day technical pant that, thanks to its feature is suitable from pedalling to your desk.

    Ergonomic knee construction, 4 way stretch fabric, denim look. The perfect recipe for an all day technical pant that, thanks to its feature is suitable from pedalling to your desk. The pre-curved construction of the knee zone ensure the rider to don’t feel restricted while pedalling or moving, the practical features placed into the pockets allows the user to storage phone or other little objects without losing them.

    GENERAL TECHNICAL FEATURES

    • Anti-Drop money pocket
    • DWR coated for added water repellency
    • Front phone pocket
    • Hi-Vis mapped zones
    • Reinforced saddle area
    • Snap-Hook

    HOW TO MEASURE YOURSELF

    WAIST

    Circumference of the waist.
    The circumference of the waist is measured by passing the tape measure on the waistline between the ribs and the pelvis just above the hip bones. Take the measurement when standing upright and breathing normally with the abdomen relaxed.

     

    HIP

    Circumference of the hips.
    The circumference of the hips is measured horizontally around the part of the pelvis that protrudes most.

     

    INSEAM

    Inner Leg Measurement.
    The distance between the lowest part of the trunk and the soles of the feet measured when standing upright with the feet slightly apart and the weight of the body evenly distributed on both legs.

     

    SIZE GUIDE

     

    CENTIMETRES

     

    SIZE 28 29 30 31 32 33 34 35 36 37 38 39
    EURO 40 42 44 46 48 50 52 54 56 58 60 62
    US 30 32 34 36 38 40 42 44 46 48 50 52
    WAIST 69–75 69–75 75–81 75–81 81–87 87–93 87–93 93–99 99–105 99–105 105–111 105–111
    HIP 83–89 83–89 89–95 89–95 95–101 101–107 101–107 107–113 113–119 113–119 119–125 119–125
    INSEAM 76–78 76–78 78–80 78–80 80–82 82–84 82–84 84–85 85–86 85–86 86–87 86–87
    INCHES

     

    SIZE 28 29 30 31 32 33 34 35 36 37 38 39
    EURO 40 42 44 46 48 50 52 54 56 58 60 62
    US 30 32 34 36 38 40 42 44 46 48 50 52
    WAIST 27.2–29.5 27.2–29.5 29.5–31.9 29.5–31.9 31.9–34.3 34.3–36.6 34.3–36.6 36.6–39.0 39.0–41.3 39.0–41.3 41.3–43.7 41.3–43.7
    HIP 32.7–35.0 32.7–35.0 35.0–37.4 35.0–37.4 37.4–39.8 39.8–42.1 39.8–42.1 42.1–44.5 44.5–46.9 44.5–46.9 46.9–49.2 46.9–49.2
    INSEAM 29.9–30.7 29.9–30.7 30.7–31.5 30.7–31.5 31.5–32.3 32.3–33.1 32.3–33.1 33.1–33.5 33.5–33.9 33.5–33.9 33.9–34.3 33.9–34.3

  • sale

    HG SOCKS

    kn199.00 kn179.00

    Seamless socks with run-resistant reinforced sections all over the heel and the toes.

    The seamless construction of these socks results in a superior breathability and comfort while riding. What’s more the reinforcements placed all over the heel and toes section provide the rider with maximum abrasion resistance even after several aggressive rides. The socks feature a high cut.

    BIKE SOCKS

    SIZE S M L
    EU 36 – 38 39 – 42 43 – 45
    US 4 – 6 7 – 9 9.5 – 11

  • INTENSE 2020 M29 FACTORY FRAME AND SHOCK

    kn24,959.00

    THE M29 IS THE PINNACLE OF DOWNHILL PERFORMANCE. WITH OVER 25-YEARS OF DEVELOPMENT, THE M29 IS THE NEWEST ADDITION TO THE M-SERIES. DESIGNED FROM THE GROUND-UP, DEVELOPED ON THE WORLD CUP CIRCUIT AND PROVEN ON THE PODIUM, THE 29″ WHEELED M29 IS IN A CLASS OF ITS OWN.

     

    With over 25 years of downhill racing knowledge, the M-series’ legendary legacy continues, although the M29 is not ‘just’ a bigger brother of the M16. With specifically designed kinematics and geometry to compliment the 29-inch wheels, the M29 is a fast, fierce and fun downhill bike as competed by our athletes Aaron Gwin, Neko Mulally and Jack Moir.
    With special features and some of the finest DH components on the market such as an optimized carbon layup, high quality wheels, internal cable routing as well as the distinguished M29 frame that was developed with the INTENSE Factory Racing team, the M29 is as striking as it is nimble when it comes to the challenges of downhill. It was prototyped in racing, in fact one of the original M29 alloy mules finished on the podium with Jack Moir at Fort William in 2017 – an emphatic moment, and absolute confirmation of the potential that would be unlocked for everyone to enjoy once the M29 project reached production status.

     

     

     

    FRAME AND SHOCK SPECIFICATIONS

    • FRAME M29 Monocoque Carbon Frame
    • Optimized Layup Carbon fiber
    • Carbon top link
    • Titanium hardware
    • Internal shift and brake routing
    • ISCG05 mounts
    • Flak guard armor

     

    FORK

    N/A

    SHOCK

    Fox Factory Float X2 / 250MM x 70MM

     

     

     

  • sale

    Nukeproof Reactor 290 Alloy Bike 2021

    kn24,089.00 – kn29,719.00

    From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.

    To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.

    Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?

    All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.

    Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents
    Rail – The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.
    To ensure the bike could climb as well as it descends, we designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.

    FEATURES

    • Aggressive Trail Bike
    • Hydro-formed 6061 Triple-Butted Aluminium Frame
    • 130mm Rear Travel
    • 2 Position Trail/Rail Flip Chip, Swinglink Driven 4 Bar Horst Link Suspension, with custom tuned shock.
    • 148mm Boost rear spacing
    • Sizes Available: Medium, Large, Extra Large

    FULL SPECS

    COMP PRO FRAME ONLY
    FRAME Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection
    FORK Marzocchi Bomber Z2, 140mm, 44mm Offset, BOOST, RAIL Damper, Gloss Black (SHORT ID: D6S2) RockShox Pike Select + Charger 2 RC 140mm, 42mm Offset, BOOST, Debonair, Gloss Black
    SHOCK RockShox Super Deluxe Select R, Custom ML Tune, 210x50mm, Bearing End, 1x bottomless token fitted. RockShox Super Deluxe Select+ RT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted. RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted
    FRONT WHEEL Sun-Ringle Duroc 35 Comp 29″, 15x110mm Nukeproof Neutron V2 29″, Tubeless Ready, 32h, 110x15mm
    REAR WHEEL Sun-Ringle Duroc 35 Comp 29″, Shimano Microspline Driver, 148x12mm Nukeproof Neutron V2 29″, Tubeless Ready, 32h, SRAM XD Driver with 36 points of engagement, 148x12mm
    TYRES Front: Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR Front: Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR
    CRANKSET Shimano Deore M6100 12 Speed Crank, 170mm, 30T, 52mm Chainline : SRAM GX Eagle 12-Speed, 170mm, 30T, B148, DUB
    SHIFTER Shimano Deore M6100-IR, 12-speed Rapidfire Plus, I-Spec EV SRAM GX Eagle 12-Speed
    REAR DERAILEUR Shimano Deore M6100, SGS 12-Speed, Shadow Plus SRAM GX Eagle 12-Speed
    CHAIN Shimano Deore M6100 12-Speed SRAM GX Eagle 12-Speed
    CASSETTE Shimano Deore M6100 12-Speed (HYPERGLIDE+), 10-51T SRAM GX Eagle 12-Speed, CS XG1275 EAGLE 10-52T
    BRAKES Shimano SLX M7120, 4 Pot Brake, Metallic Pads with Fins SRAM Guide RE
     FRONT ROTOR Shimano SM-RT66, 203mm SRAM Centreline, 200mm
    REAR ROTOR Shimano SM-RT66, 180mm SRAM Centreline, 180mm
    HANDLEBARS Nukeproof Neutron V2 25mm Rise, Width – M780mm, L800mm, XL800mm) Nukeproof Horizon V2 25mm Rise, Width – M780mm, L800mm, XL800mm)
    STEM Nukeproof Neutron AM, 45mm, black Nukeproof Neutron AM, 45mm, black
    SADDLE Nukeproof Horizon SL, Black Nukeproof Horizon SL, Black
    SEATPOST Brand X Ascend internal, 31.6mm, M:150mm drop; L/XL: 170mm Drop Brand X Ascend internal, 31.6mm, M:150mm drop; L/XL: 170mm Drop
    HEADSET Nukeproof, 44-56 IITS Nukeproof, 44-56 IITS Nukeproof, 44-56 IITS
    GRIPS Nukeproof Sam Hill Signature Nukeproof Sam Hill Signature
    BEARINGS Enduro Bearings Enduro Bearings Enduro Bearings
    WEIGHT (SIZE MEDIUM) 15Kgs/33lbs (Tubeless) 14.4Kgs/31.7lbs (Tubeless) 3.77Kgs/8.3lbs (Medium)

    GEOMETRY & SIZING

    MEDIUM LARGE X-LARGE X-LARGE
    (A) REACH 451 480 514 514
    (B) STACK 615 620 625 625
    (C) EFFECTIVE TOP TUBE LENGTH 610 640 675 675
    (D) SEATTUBE LENGTH 420 458 508 508
    (E) EFFECTIVE SEATTUBE ANGLE 75.5°
    (Low 75°)    		 75.5°
    (Low 75°)    		 75.5°
    (Low 75°)    		 75.5°
    (Low 75°)
    (F) SEATTUBE ANGLE (ACTUAL) 71°
    (Low 70.5°)    		 71°
    (Low 70.5°)    		 71°
    (Low 70.5°)    		 71°
    (Low 70.5°)
    (G) SADDLE HEIGHT AT SADDLE OFFSET 700 750 850 –
    (H) SADDLE OFFSET AT SADDLE HEIGHT 180.11 196.07 228.33 –
    (I) HEADTUBE LENGTH 105 110 115 115
    (J) HEADTUBE ANGLE 66°
    (Low 65.5)    		 66°
    (Low 65.5)    		 66°
    (Low 65.5)    		 66°
    (Low 65.5)
    (K) CHAINSTAY LENGTH 440 440 440 440
    (L) FRONT CENTRE 762.5 792 830 830
    (M) WHEELBASE 1205 1235 1271 1271
    (N) BOTTOM BRACKET DROP -33
    (Low -39)    		 -33
    (Low -39)    		 -33
    (Low -39)    		 -33
    (Low -39)
    (O) BOTTOM BRACKET HEIGHT 336
    (Low 330)    		 336
    (Low 330)    		 336
    (Low 330)    		 336
    (Low 330)
    (P) STAND OVER HEIGHT 733/728 728/735 736/741 769 (High)
    (Q) FORK TRAVEL 140 140 140 140
    (R) TRAIL 108.62 108.62 108.62 –
    (S) FORK OFFSET 44 44 44 44
    (T) AXLE TO CROWN 554 554 554 554
    (U) MAXIMUM SEATPOST INSERT 215 250 300 300

    *All dimensions in mm unless otherwise stated

    RECOMMENDED SIZING

    FRAME SPEC

    Material: Hydroformed 6061 Triple-Butted Aluminium
    Fork Travel: 140mm (RS 150mm)
    Axle to Crown: 554mm (RS 564mm)
    Fork Offset: 44mm
    Rear Travel: 130mm
    Wheels Size: 29″
    Max Tyre Size: 2.6″
    Recommended Shock Sag (Measured seated): 30%
    Shock Size: 210x50mm
    Shock Hardware F: 25x8mm
    Shock Hardware R: 30x8mm
    Sizing: M/L/XL
    Headtube: 44-56mm Tapered Semi-Integrated
    Headset: ZS44-28.6 – T2 / ZS56/40 – B8
    Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS)
    Seatpost: 31.6mm (Internal Routing for Dropper Seatpost)
    Seat Clamp: 34.9mm
    BB: Threaded 73mm BSA
    Rear Hub: Boost 148x12mm
    Rear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm)
    Chain Guide: ISCG05
    Brake Mount: 180mm Direct Post
    Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS

     

  • sale

    DAINESE LP 9FIFTY DIAMOND ERA SNAPBACK

    kn300.00 kn270.00

    Classic contours in an iconic vented design. Our coolest cap in more ways than one!

    CHARACTERISTICS

    • Flat visor
    • Low profile
    • Snapback closure

    MAIN MATERIALS

    • Diamond Era: breathable fabric

     

  • sale

    DAINESE CUFF BEANIE

    kn239.00 kn219.00

    COMPOSITION

    100% Acrylic

     

    MAIN MATERIALS

    100% Acrylic knit

     

RADNO VRIJEME

10:00 - 18:00

KONTAKT

Pantovčak 59, 10 000 Zagreb,
Hrvatska

nino.ruzicka@gmail.com

+385 91 505 1959