Samo logirani kupci koji su kupili ovaj proizvod mogu napisati recenziju.
Related Products
INTENSE 2020 M29 FACTORY FRAME AND SHOCK
kn24,959.00
THE M29 IS THE PINNACLE OF DOWNHILL PERFORMANCE. WITH OVER 25-YEARS OF DEVELOPMENT, THE M29 IS THE NEWEST ADDITION TO THE M-SERIES. DESIGNED FROM THE GROUND-UP, DEVELOPED ON THE WORLD CUP CIRCUIT AND PROVEN ON THE PODIUM, THE 29″ WHEELED M29 IS IN A CLASS OF ITS OWN.
With over 25 years of downhill racing knowledge, the M-series’ legendary legacy continues, although the M29 is not ‘just’ a bigger brother of the M16. With specifically designed kinematics and geometry to compliment the 29-inch wheels, the M29 is a fast, fierce and fun downhill bike as competed by our athletes Aaron Gwin, Neko Mulally and Jack Moir.
With special features and some of the finest DH components on the market such as an optimized carbon layup, high quality wheels, internal cable routing as well as the distinguished M29 frame that was developed with the INTENSE Factory Racing team, the M29 is as striking as it is nimble when it comes to the challenges of downhill. It was prototyped in racing, in fact one of the original M29 alloy mules finished on the podium with Jack Moir at Fort William in 2017 – an emphatic moment, and absolute confirmation of the potential that would be unlocked for everyone to enjoy once the M29 project reached production status.
From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.
To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.
Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?
All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.
Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents
Rail – The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.
To ensure the bike could climb as well as it descends, we designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.
FEATURES
Aggressive Trail Bike
Hydro-formed 6061 Triple-Butted Aluminium Frame
130mm Rear Travel
2 Position Trail/Rail Flip Chip, Swinglink Driven 4 Bar Horst Link Suspension, with custom tuned shock.
148mm Boost rear spacing
Sizes Available: Medium, Large, Extra Large
FULL SPECS
COMP
PRO
FRAME ONLY
FRAME
Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection
Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection
Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection
Seamless socks with run-resistant reinforced sections all over the heel and the toes.
The seamless construction of these socks results in a superior breathability and comfort while riding. What’s more the reinforcements placed all over the heel and toes section provide the rider with maximum abrasion resistance even after several aggressive rides. The socks feature a high cut.
The Cura is a clean, simple, and great riding brake designed to fit all riders and their bikes. The lever, designed for the human factor, is our most ergonomic and intuitive yet. With how capable mountain bikes have become at conquering any trail our caliper is proficient in taming the bike to overcome the trail.
This new era of Formula disc brakes has given us the chance to change our status quo. The Cura is Formula’s first brake to use mineral oil. Our brake performance standards have always been out of the range for the inclusion of mineral oil. We have finally found and use a mineral oil that complements the performance of our brakes.
The Formula Cura has been designed from top to bottom with riders in mind. In our laboratory, and on the race track, we have confirmed that the Cura is an extremely powerful, wide range brake that feels comfortable from weekend warriors and Enduro riders to World Cup Downhill racers. We believe that brakes are one of the most personal and intimate parts of the bike, this is why we have simplicity and efficiency in mind when we design it.
TECHNICAL SPECIFICATIONS
MASTER CYLINDER
Type
Axial – Forged Aluminum
Body Finish
Glossy Black / Polished / Gold
Clamp Color
Matte Black
Screws
Stainless Steel
LEVER BLADE
Material
Forged Aluminum
Color
Matte Black
CALIPER
Type
PM6 with 24mm pistons
Body Finish
Glossy Black / Polished / Gold
Screw color
Stainless Steel
Pad type
Organic Compound
Hose lenght
100cm front / 165cm rear
Hose finish
Matte Black
Feeling Control System
Not Compatible
Speed Lock
Optional / Caliper side only
MixMaster
Optional (Shimano I-Spec B or SRAM)
Brake Pads
All Compatible
Rotors
All Compatible (6H & Center Lock)
SYSTEM WEIGHT
With 85cm hose, 160mm 1-piece rotor and mounting hardware
359g
The MixMaster handlebar clamp is an option for all Formula brakes. This simple upgrade allows for the direct attachment of Shimano (I-Spec B only) and SRAM shifters on your Formula brake, giving the bike a clean look. Perfect to help de-clutter handlebars busy with the many clamps today’s bikes employ.
Speed Lock technology allows for the disconnection and connection of the hose multiple times without losing fluid or introducing air into the brake. The Speed Lock hose is the best option for internally routed frames, the traveler who packs their bike, or anyone who is constantly assembling/disassembling their bike.
We are proud to introduce our new disc. After more than three years of development we have arrived at a design that combines the best of all the “must have” features in a disc: extreme lateral stiffness that guarantees impact resistance by protecting the disk from unwanted damage; reduced unwanted noise caused by friction; a special anti-noise design which reduces the risk of resonance and vibrations; reduced pad wear.
Speed Demon, the red triangle in the shape of a stylised devil, is Dainese’s symbol. It was created in 1972, when the company was founded, and is based on a faun, a figure of Roman mythology and a god of nature. In 1981, it is radically redesigned, then finally becomes what it is today after its last redesign in 2005.
COMPOSITION
100% Cotton
MAIN MATERIALS
100% Cotton
CASUAL WEAR: MAN
CENTIMETRES
ALPHA
XS
S
M
L
XL
XXL
XXXL
EURO
42
44-46
48-50
52-54
56-58
60
62
USA-UK
32
34-36
38-40
42-44
46-48
50
52
CHEST
82–86
86–94
94–102
102–110
110–118
118–122
122–126
ARM
55–56
56–58
58–60
60–62
62–63
63–64
63–64
INCHES
ALPHA
XS
S
M
L
XL
XXL
XXXL
EURO
42
44-46
48-50
52-54
56-58
60
62
USA-UK
32
34-36
38-40
42-44
46-48
50
52
CHEST
32.3–33.9
33.9–37.0
37.0–40.2
40.2–43.3
43.3–46.5
46.5–48.0
48.0–49.6
ARM
21.7–22.0
22.0–22.8
22.8–23.6
23.6–24.4
24.4–24.8
24.8–25.2
24.8–25.2
CASUAL WEAR: KIDS
CENTIMETRES
ALPHA
JXXS
JXS
JS
JM
JL
JXL
AGE
4
6
8
10
12
14
HOW TO MEASURE YOURSELF
CHEST
Circumference of the chest
The circumference of the chest is the maximum measurement taken around the chest when standing upright and breathing normally. The tape measure is passed around the chest at the level of the shoulder blades, below the armpits.
ARM
Sleeve length
This is the distance between the outside of the shoulder (humerus) and the wrist when the arm is relaxed.
Recenzije
Još nema recenzija.