Seamless bike socks for maximum comfort and breathability.
Enjoy maximum comfort and breathability, for superior performance.
HG HALLERBOS seamless socks are made from a single thread, making them extremely light and allowing the thickness to vary. This means that the areas most subject to wear, such as heel and toes, can be reinforced and the breathability is increased where it’s needed most – shin, instep, and sole. The medium size is perfect for a range of uses, from Trail to Downhill.
GENERAL TECHNICAL FEATURES
Reinforced heel and toes sections
90% Polyester 10% Elastane
BIKE SOCKS – SIZE GUIDE
36 – 38
39 – 42
43 – 45
4 – 6
7 – 9
9.5 – 11
CURA 4 BRAKE
BEYOND THE EXPECTATIONS
With Cura 4 we set a very ambitious goal for ourselves, we tried to go beyond even our own expectations. Our direction was clear from the beginning, create a brake that had no equal in terms of power and performance, one that was made of the highest quality materials and was accessible to a vast number of riders.
The four 18mm diameter pistons of the Cura 4 provide the rider with, up until now, unimaginable power. The expanded friction surface of the pads and the increased thickness guarantee perfect modulation. With Cura 4 you will be able to have maximum control over braking power. The optimized roll-back allows for reaching that exceptional lever feeling that has already made the Cura famous.
The Cura 4 inherits its quality of materials from its smaller brother, Cura. In fact, it is a fully forged and anodized brake, a production process that guarantees structural quality, reliability over time and low weight.
Type – Axial – Forged aluminum
Body Finish – Glossy Black / Polished / Gold
Clamp Color – Matte Black / Glossy Black
Screws – Stainless Steel
Material – Forged Aluminum
Color – Matte Black / Glossy Black
Type – PM6 with 4xØ18mm pistons
Body Finish – Glossy Black / Polished / Gold
Screws – High tensile steel
Pad type – Organic
Hose lenght – 175cm (both, front and rear)
Hose finish – Matte Black
Feeling Control System – Not compatible
Speed Lock – Optional / Caliper side only
MixMaster – Optional (Shimano I-Spec B or SRAM)
Rotors – All Compatible (6H & Center Lock)
SYSTEM WEIGHT 379g
With 85cm hose, 160mm 1-piece rotor and mounting hardware
The MixMaster handlebar clamp is an option for all Formula brakes. This simple upgrade allows for the direct attachment of Shimano (I-Spec B only) and SRAM shifters on your Formula brake, giving the bike a clean look. Perfect to help de-clutter handlebars busy with the many clamps today’s bikes employ.
Speed Lock technology allows for the disconnection and connection of the hose multiple times without losing fluid or introducing air into the brake. The Speed Lock hose is the best option for internally routed frames, the traveler who packs their bike, or anyone who is constantly assembling/disassembling their bike.
We are proud to introduce our new disc. After more than three years of development we have arrived at a design that combines the best of all the “must have” features in a disc: extreme lateral stiffness that guarantees impact resistance by protecting the disk from unwanted damage; reduced unwanted noise caused by friction; a special anti-noise design which reduces the risk of resonance and vibrations; reduced pad wear.
D-DAKAR HYDRATION BACKPACK Dainese by OGIO. For uncompromising travelers, the D-Dakar is designed for extreme adventure touring. With its large hydration bag you will be able to take on any adventure.
2 stretch mesh pockets on shoulder straps for storing GEL packets and/or Bite Valve docking station
Capacity: 9,4 L
Clear TPU window for displaying ID, trail map or lift pass
Comes with 100 oz / 3 Liter OGIO bladder made from BPA -free polyurethane film protected by Microban® antimicrobial technology
Electronics /personals drop pocket on the top of the bag
Ergonomically padded Air mesh shoulder straps for wicking moisture away
Large compartment for stowing excess layers of clothing, gear and tools
Raised Air mesh POD back panel directs airflow cooling down the body
Two external side pockets for stowing smaller gear can be used as stirrups in conjunction with the upper compression straps to hold larger items
Upper compression straps to maintain pack stability and load distribution
INTENSE 2020 M29 ELITE
THE M29 IS THE PINNACLE OF DOWNHILL PERFORMANCE. WITH OVER 25-YEARS OF DEVELOPMENT, THE M29 IS THE NEWEST ADDITION TO THE M-SERIES. DESIGNED FROM THE GROUND-UP, DEVELOPED ON THE WORLD CUP CIRCUIT AND PROVEN ON THE PODIUM, THE 29″ WHEELED M29 IS IN A CLASS OF ITS OWN.
WITH OVER 25 YEARS OF DOWNHILL RACING KNOWLEDGE, THE M-SERIES’ LEGENDARY LEGACY CONTINUES, ALTHOUGH THE M29 IS NOT ‘JUST’ A BIGGER BROTHER OF THE M16. WITH SPECIFICALLY DESIGNED KINEMATICS AND GEOMETRY TO COMPLIMENT THE 29-INCH WHEELS, THE M29 IS A FAST, FIERCE AND FUN DOWNHILL BIKE AS COMPETED BY OUR ATHLETES AARON GWIN, NEKO MULALLY AND JACK MOIR.
With special features and some of the finest DH components on the market such as an optimized carbon layup, high quality wheels, internal cable routing as well as the distinguished M29 frame that was developed with the INTENSE Factory Racing team, the M29 is as striking as it is nimble when it comes to the challenges of downhill. It was prototyped in racing, in fact one of the original M29 alloy mules finished on the podium with Jack Moir at Fort William in 2017 – an emphatic moment, and absolute confirmation of the potential that would be unlocked for everyone to enjoy once the M29 project reached production status.
ELITE BUILD SPECIFICATIONS
M29 Monocoque Carbon Frame
Optimized Layup Carbon fiber
Carbon top link, Titanium hardware, Internal shift and brake routing