...     385 91 505 1959
1
HG HARASHIMAYA
kn1,579.00
Quantity: 1
Subtotal:
kn1,579.00
Checkout

HG HARASHIMAYA

  1. Home
  2. Trgovina
  3. BIKE SHOP
  4. ODJEĆA I OBUĆA
  5. odjeća
  6. HG HARASHIMAYA
Vidi košaricu “HG HARASHIMAYA” je dodano u vašu košaricu.
sale

HG HARASHIMAYA

SKU: 203740510.

kn1,579.00

Add to wishlist

Waterproof jacket made from tear-resistant laminated stretch fabric, specially designed to respond to all weather conditions.

Feel free to explore and discover new paths, in all weather and on any terrain. This jacket has been designed and developed to meet the needs of every rider.
It’s made of a four-way elasticated tear-resistant fabric combined with a waterproof, highly breathable membrane, ensuring freedom of movement and extreme weather resistance.
The adjustable hood is designed to be worn under your helmet in driving rain. The air vents under the biceps and laser cuts increase ventilation, providing the utmost confidence on even the hottest days.
Two large pockets offer quick access to the chest, so that items and accessories remain within easy reach, while the large back pocket is designed to hold a map or gloves when not in use.

GENERAL TECHNICAL FEATURES

  • 4 Way stretch
  • Cuffs regulation
  • Embedded drawstring components
  • Fitted hood to be worn under the helmet
  • Fully seam sealed
  • Laser cut air ventings
  • Side Armpit air ventings
  • Standard Fit
  • Water Column 10.000 mm
  • Waterproof zippers

MATERIALS

  • 50% Polyester 50% Polyurethan (Outer Layer)
  • 84% Nylon 16% Elastane (Lining)

 

 

 

HOW TO MEASURE YOURSELF

CHEST

Circumference of the chest.
The circumference of the chest is the maximum measurement taken around the chest when standing upright and breathing normally. The tape measure is passed around the chest at the level of the shoulder blades, below the armpits.

WAIST

Circumference of the waist.
The circumference of the waist is measured by passing the tape measure on the waistline between the ribs and the pelvis just above the hip bones. Take the measurement when standing upright and breathing normally with the abdomen relaxed.

ARM

Sleeve length.
This is the distance between the outside of the shoulder (humerus) and the wrist when the arm is relaxed.

HIP

Circumference of the hips.
The circumference of the hips is measured horizontally around the part of the pelvis that protrudes most.

MAN

 

CENTIMETRES

 

ALPHA XS S M L XL XXL XXXL
EURO 42 44/46 48 50/52 54 56/58 60
USA-UK 32 34/36 38 40/42 44 46/48 50
HEIGHT 163–167.5 167.5–172 172–176 176–180 180–184 184–188 188–189
CHEST 81–87 87–93 93–99 99–105 105–111 111–117 117–123
WAIST 69–75 75–81 81–87 87–93 93–99 99–105 105–111
ARM 56–57 57–58.5 58.5–60 60–61 61–62 62–62.5 62.5–63
HIP 83–89 89–95 95–101 101–107 107–113 113–119 119–125

 

INCHES

 

 

ALPHA XS S M L XL XXL XXXL
EURO 42 44/46 48 50/52 54 56/58 60
USA-UK 32 34/36 38 40/42 44 46/48 50
HEIGHT 64.2–65.9 65.9–67.7 67.7–69.3 69.3–70.9 70.9–72.4 72.4–74.0 74.0–74.4
CHEST 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 43.7–46.1 46.1–48.4
WAIST 27.2–29.5 29.5–31.9 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7
ARM 22.0–22.4 22.4–23.0 23.0–23.6 23.6–24.0 24.0–24.4 24.4–24.6 24.6–24.8
HIP 32.7–35.0 35.0–37.4 37.4–39.8 39.8–42.1 42.1–44.5 44.5–46.9 46.9–49.2

 

* AWA BLACK – PONCHO: M (42 – 48), L (50 – 60)

 

WOMAN

 

CENTIMETRES

 

ALPHA XXS XS S M L XL
US 6 8 10 12 14 16
HEIGHT 157–160 160–163 163–166 166–169 169–172 172–175
CHEST 72–76 76–80 80–84 84–88 88–92 92–96
WAIST 56–60 60–64 64–68 68–72 72–76 76–80
ARM 51–52 52–54 54–55 55–57 57–58 58–59
HIP 82–86 86–90 90–94 94–98 98–102 102–106

 

 

INCHES

 

ALPHA XXS XS S M L XL
US 6 8 10 12 14 16
HEIGHT 61.8–63.0 63.0–64.2 64.2–65.4 65.4–66.5 66.5–67.7 67.7–68.9
CHEST 28.3–29.9 29.9–31.5 31.5–33.1 33.1–34.6 34.6–36.2 36.2–37.8
WAIST 22.0–23.6 23.6–25.2 25.2–26.8 26.8–28.3 28.3–29.9 29.9–31.5
ARM 20.1–20.5 20.5–21.3 21.3–21.7 21.7–22.4 22.4–22.8 22.8–23.2
HIP 32.3–33.9 33.9–35.4 35.4–37.0 37.0–38.6 38.6–40.2 40.2–41.7
Category: BIKE SHOP dainese odjeća ODJEĆA I OBUĆA

Recenzije

Još nema recenzija.

Samo logirani kupci koji su kupili ovaj proizvod mogu napisati recenziju.

Related Products

  • sale

    AWA BLACK TEE

    kn439.00 kn399.00

    Youthful and stylish, the AWA BLACK T-shirt offers a comfortable fit even on the hottest days. Designed with summer commuters in mind, it guarantees maximum freshness and quick drying in all conditions.
    The cellulose fabric is silky soft to the touch and eco-friendly as well. Elastane fibers lend stretch to the shirt which hugs the rider’s body for a superior fit and comfort even during energetic pedaling.

    High-tech, paired with a minimalist look, makes it perfect for any city experience, in the saddle or not.

     

    GENERAL TECHNICAL FEATURES

    • Crew neck
    • Standard Fit

    MATERIALS

    • 10% Elastane
    • 90% Micromodal

     

    HOW TO MEASURE YOURSELF

    CHEST

    Circumference of the chest.
    The circumference of the chest is the maximum measurement taken around the chest when standing upright and breathing normally. The tape measure is passed around the chest at the level of the shoulder blades, below the armpits.

    WAIST

    Circumference of the waist.
    The circumference of the waist is measured by passing the tape measure on the waistline between the ribs and the pelvis just above the hip bones. Take the measurement when standing upright and breathing normally with the abdomen relaxed.

    ARM

    Sleeve length.
    This is the distance between the outside of the shoulder (humerus) and the wrist when the arm is relaxed.

    HIP

    Circumference of the hips.
    The circumference of the hips is measured horizontally around the part of the pelvis that protrudes most.

    MAN

     

    CENTIMETRES

     

    ALPHA XS S M L XL XXL XXXL
    EURO 42 44/46 48 50/52 54 56/58 60
    USA-UK 32 34/36 38 40/42 44 46/48 50
    HEIGHT 163–167.5 167.5–172 172–176 176–180 180–184 184–188 188–189
    CHEST 81–87 87–93 93–99 99–105 105–111 111–117 117–123
    WAIST 69–75 75–81 81–87 87–93 93–99 99–105 105–111
    ARM 56–57 57–58.5 58.5–60 60–61 61–62 62–62.5 62.5–63
    HIP 83–89 89–95 95–101 101–107 107–113 113–119 119–125

     

    INCHES

     

     

    ALPHA XS S M L XL XXL XXXL
    EURO 42 44/46 48 50/52 54 56/58 60
    USA-UK 32 34/36 38 40/42 44 46/48 50
    HEIGHT 64.2–65.9 65.9–67.7 67.7–69.3 69.3–70.9 70.9–72.4 72.4–74.0 74.0–74.4
    CHEST 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 43.7–46.1 46.1–48.4
    WAIST 27.2–29.5 29.5–31.9 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7
    ARM 22.0–22.4 22.4–23.0 23.0–23.6 23.6–24.0 24.0–24.4 24.4–24.6 24.6–24.8
    HIP 32.7–35.0 35.0–37.4 37.4–39.8 39.8–42.1 42.1–44.5 44.5–46.9 46.9–49.2

     

    * AWA BLACK – PONCHO: M (42 – 48), L (50 – 60)

     

    WOMAN

     

    CENTIMETRES

     

    ALPHA XXS XS S M L XL
    US 6 8 10 12 14 16
    HEIGHT 157–160 160–163 163–166 166–169 169–172 172–175
    CHEST 72–76 76–80 80–84 84–88 88–92 92–96
    WAIST 56–60 60–64 64–68 68–72 72–76 76–80
    ARM 51–52 52–54 54–55 55–57 57–58 58–59
    HIP 82–86 86–90 90–94 94–98 98–102 102–106

     

     

    INCHES

     

    ALPHA XXS XS S M L XL
    US 6 8 10 12 14 16
    HEIGHT 61.8–63.0 63.0–64.2 64.2–65.4 65.4–66.5 66.5–67.7 67.7–68.9
    CHEST 28.3–29.9 29.9–31.5 31.5–33.1 33.1–34.6 34.6–36.2 36.2–37.8
    WAIST 22.0–23.6 23.6–25.2 25.2–26.8 26.8–28.3 28.3–29.9 29.9–31.5
    ARM 20.1–20.5 20.5–21.3 21.3–21.7 21.7–22.4 22.4–22.8 22.8–23.2
    HIP 32.3–33.9 33.9–35.4 35.4–37.0 37.0–38.6 38.6–40.2 40.2–41.7

  • INTENSE 2020 M29 ELITE

    kn57,070.00

    THE M29 IS THE PINNACLE OF DOWNHILL PERFORMANCE. WITH OVER 25-YEARS OF DEVELOPMENT, THE M29 IS THE NEWEST ADDITION TO THE M-SERIES. DESIGNED FROM THE GROUND-UP, DEVELOPED ON THE WORLD CUP CIRCUIT AND PROVEN ON THE PODIUM, THE 29″ WHEELED M29 IS IN A CLASS OF ITS OWN.

     

    WITH OVER 25 YEARS OF DOWNHILL RACING KNOWLEDGE, THE M-SERIES’ LEGENDARY LEGACY CONTINUES, ALTHOUGH THE M29 IS NOT ‘JUST’ A BIGGER BROTHER OF THE M16. WITH SPECIFICALLY DESIGNED KINEMATICS AND GEOMETRY TO COMPLIMENT THE 29-INCH WHEELS, THE M29 IS A FAST, FIERCE AND FUN DOWNHILL BIKE AS COMPETED BY OUR ATHLETES AARON GWIN, NEKO MULALLY AND JACK MOIR.

     

     

    With special features and some of the finest DH components on the market such as an optimized carbon layup, high quality wheels, internal cable routing as well as the distinguished M29 frame that was developed with the INTENSE Factory Racing team, the M29 is as striking as it is nimble when it comes to the challenges of downhill. It was prototyped in racing, in fact one of the original M29 alloy mules finished on the podium with Jack Moir at Fort William in 2017 – an emphatic moment, and absolute confirmation of the potential that would be unlocked for everyone to enjoy once the M29 project reached production status.

     

     

     

    ELITE BUILD SPECIFICATIONS

    FRAME
    • M29 Monocoque Carbon Frame
    • Optimized Layup Carbon fiber
    • Carbon top link, Titanium hardware, Internal shift and brake routing
    • ISCG05 mounts, Flak guard armor
    • 208MM (8.2”) travel

     

    FORK

    Fox Factory Float 49 / 200MM / Boost

    SHOCK

    Fox Factory Float X2 / 250MM x 70MM

    WHEELSET

    WHEELS 29″ E13 LG1 DH Race Carbon 31MM / Boost
    HUBS LG1 Race SL hubs 32 Hole 20×110 front, 12×157 rear hub 6-bolt, XD
    RIMS 29″ E13 LG1 DH Race Carbon 30MM / Boost
    SPOKES E13
    TIRES Front: Maxxis Minion DHF 29 x 2.50” // Rear: Maxxis Minion DHR II 29 x 2.40”

    DRIVETRAIN

    SHIFTERS Sram GX 7-speed Trigger
    REAR DERAILLEUR Sram X01 DH, 7 speed
    FRONT DERAILLEUR N/A
    CRANK E13 LG1 Race Carbon / 36t / 165MM / Boost
    CASSETTE E13 7sp DM / 9-21t
    CHAIN Sram PC 1110 7/11sp
    CHAIN GUIDE E13 LG1+
    BOTTOM BRACKET E13 83MM BSA (Threaded)

    COMPONENTS

    SADDLE Fabric Scoop Radius Elite
    SEATPOST Intense Alloy 31.6mm
    HANDLEBAR Renthal Fatbar 800x20mm
    STEM Renthal Integra Direct Mount 31.8mm Clamp. 45mm
    HEADSET Cane Creek 40 Series, ZS49/ZS56.30
    BRAKESET Shimano Saint M820 Front / Shimano Saint M820 Rear Shimano XT RT76 203MM Front / Shimano XT RT76 203MM Rear
    GRIPS Intense

     

    *Parts/Spec are subject to change without notice.

    Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.

     

    FIND YOUR SIZING

      

  • Nukeproof Reactor 290 Alloy Bike 2021

    kn28,879.00 – kn35,719.00

    From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.

    To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.

    Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?

    All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.

    Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents
    Rail – The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.
    To ensure the bike could climb as well as it descends, we designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.

    FEATURES

    • Aggressive Trail Bike
    • Hydro-formed 6061 Triple-Butted Aluminium Frame
    • 130mm Rear Travel
    • 2 Position Trail/Rail Flip Chip, Swinglink Driven 4 Bar Horst Link Suspension, with custom tuned shock.
    • 148mm Boost rear spacing
    • Sizes Available: Medium, Large, Extra Large

    FULL SPECS

    COMP PRO FRAME ONLY
    FRAME Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection
    FORK Marzocchi Bomber Z2, 140mm, 44mm Offset, BOOST, RAIL Damper, Gloss Black (SHORT ID: D6S2) RockShox Pike Select + Charger 2 RC 140mm, 42mm Offset, BOOST, Debonair, Gloss Black
    SHOCK RockShox Super Deluxe Select R, Custom ML Tune, 210x50mm, Bearing End, 1x bottomless token fitted. RockShox Super Deluxe Select+ RT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted. RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted
    FRONT WHEEL Sun-Ringle Duroc 35 Comp 29″, 15x110mm Nukeproof Neutron V2 29″, Tubeless Ready, 32h, 110x15mm
    REAR WHEEL Sun-Ringle Duroc 35 Comp 29″, Shimano Microspline Driver, 148x12mm Nukeproof Neutron V2 29″, Tubeless Ready, 32h, SRAM XD Driver with 36 points of engagement, 148x12mm
    TYRES Front: Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR Front: Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR
    CRANKSET Shimano Deore M6100 12 Speed Crank, 170mm, 30T, 52mm Chainline : SRAM GX Eagle 12-Speed, 170mm, 30T, B148, DUB
    SHIFTER Shimano Deore M6100-IR, 12-speed Rapidfire Plus, I-Spec EV SRAM GX Eagle 12-Speed
    REAR DERAILEUR Shimano Deore M6100, SGS 12-Speed, Shadow Plus SRAM GX Eagle 12-Speed
    CHAIN Shimano Deore M6100 12-Speed SRAM GX Eagle 12-Speed
    CASSETTE Shimano Deore M6100 12-Speed (HYPERGLIDE+), 10-51T SRAM GX Eagle 12-Speed, CS XG1275 EAGLE 10-52T
    BRAKES Shimano SLX M7120, 4 Pot Brake, Metallic Pads with Fins SRAM Guide RE
     FRONT ROTOR Shimano SM-RT66, 203mm SRAM Centreline, 200mm
    REAR ROTOR Shimano SM-RT66, 180mm SRAM Centreline, 180mm
    HANDLEBARS Nukeproof Neutron V2 25mm Rise, Width – M780mm, L800mm, XL800mm) Nukeproof Horizon V2 25mm Rise, Width – M780mm, L800mm, XL800mm)
    STEM Nukeproof Neutron AM, 45mm, black Nukeproof Neutron AM, 45mm, black
    SADDLE Nukeproof Horizon SL, Black Nukeproof Horizon SL, Black
    SEATPOST Brand X Ascend internal, 31.6mm, M:150mm drop; L/XL: 170mm Drop Brand X Ascend internal, 31.6mm, M:150mm drop; L/XL: 170mm Drop
    HEADSET Nukeproof, 44-56 IITS Nukeproof, 44-56 IITS Nukeproof, 44-56 IITS
    GRIPS Nukeproof Sam Hill Signature Nukeproof Sam Hill Signature
    BEARINGS Enduro Bearings Enduro Bearings Enduro Bearings
    WEIGHT (SIZE MEDIUM) 15Kgs/33lbs (Tubeless) 14.4Kgs/31.7lbs (Tubeless) 3.77Kgs/8.3lbs (Medium)

    GEOMETRY & SIZING

    MEDIUM LARGE X-LARGE X-LARGE
    (A) REACH 451 480 514 514
    (B) STACK 615 620 625 625
    (C) EFFECTIVE TOP TUBE LENGTH 610 640 675 675
    (D) SEATTUBE LENGTH 420 458 508 508
    (E) EFFECTIVE SEATTUBE ANGLE 75.5°
    (Low 75°)    		 75.5°
    (Low 75°)    		 75.5°
    (Low 75°)    		 75.5°
    (Low 75°)
    (F) SEATTUBE ANGLE (ACTUAL) 71°
    (Low 70.5°)    		 71°
    (Low 70.5°)    		 71°
    (Low 70.5°)    		 71°
    (Low 70.5°)
    (G) SADDLE HEIGHT AT SADDLE OFFSET 700 750 850 –
    (H) SADDLE OFFSET AT SADDLE HEIGHT 180.11 196.07 228.33 –
    (I) HEADTUBE LENGTH 105 110 115 115
    (J) HEADTUBE ANGLE 66°
    (Low 65.5)    		 66°
    (Low 65.5)    		 66°
    (Low 65.5)    		 66°
    (Low 65.5)
    (K) CHAINSTAY LENGTH 440 440 440 440
    (L) FRONT CENTRE 762.5 792 830 830
    (M) WHEELBASE 1205 1235 1271 1271
    (N) BOTTOM BRACKET DROP -33
    (Low -39)    		 -33
    (Low -39)    		 -33
    (Low -39)    		 -33
    (Low -39)
    (O) BOTTOM BRACKET HEIGHT 336
    (Low 330)    		 336
    (Low 330)    		 336
    (Low 330)    		 336
    (Low 330)
    (P) STAND OVER HEIGHT 733/728 728/735 736/741 769 (High)
    (Q) FORK TRAVEL 140 140 140 140
    (R) TRAIL 108.62 108.62 108.62 –
    (S) FORK OFFSET 44 44 44 44
    (T) AXLE TO CROWN 554 554 554 554
    (U) MAXIMUM SEATPOST INSERT 215 250 300 300

    *All dimensions in mm unless otherwise stated

    RECOMMENDED SIZING

    FRAME SPEC

    Material: Hydroformed 6061 Triple-Butted Aluminium
    Fork Travel: 140mm (RS 150mm)
    Axle to Crown: 554mm (RS 564mm)
    Fork Offset: 44mm
    Rear Travel: 130mm
    Wheels Size: 29″
    Max Tyre Size: 2.6″
    Recommended Shock Sag (Measured seated): 30%
    Shock Size: 210x50mm
    Shock Hardware F: 25x8mm
    Shock Hardware R: 30x8mm
    Sizing: M/L/XL
    Headtube: 44-56mm Tapered Semi-Integrated
    Headset: ZS44-28.6 – T2 / ZS56/40 – B8
    Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS)
    Seatpost: 31.6mm (Internal Routing for Dropper Seatpost)
    Seat Clamp: 34.9mm
    BB: Threaded 73mm BSA
    Rear Hub: Boost 148x12mm
    Rear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm)
    Chain Guide: ISCG05
    Brake Mount: 180mm Direct Post
    Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS

     

  • INTENSE 2020 M29 FACTORY FRAME AND SHOCK

    kn24,959.00

    THE M29 IS THE PINNACLE OF DOWNHILL PERFORMANCE. WITH OVER 25-YEARS OF DEVELOPMENT, THE M29 IS THE NEWEST ADDITION TO THE M-SERIES. DESIGNED FROM THE GROUND-UP, DEVELOPED ON THE WORLD CUP CIRCUIT AND PROVEN ON THE PODIUM, THE 29″ WHEELED M29 IS IN A CLASS OF ITS OWN.

     

    With over 25 years of downhill racing knowledge, the M-series’ legendary legacy continues, although the M29 is not ‘just’ a bigger brother of the M16. With specifically designed kinematics and geometry to compliment the 29-inch wheels, the M29 is a fast, fierce and fun downhill bike as competed by our athletes Aaron Gwin, Neko Mulally and Jack Moir.
    With special features and some of the finest DH components on the market such as an optimized carbon layup, high quality wheels, internal cable routing as well as the distinguished M29 frame that was developed with the INTENSE Factory Racing team, the M29 is as striking as it is nimble when it comes to the challenges of downhill. It was prototyped in racing, in fact one of the original M29 alloy mules finished on the podium with Jack Moir at Fort William in 2017 – an emphatic moment, and absolute confirmation of the potential that would be unlocked for everyone to enjoy once the M29 project reached production status.

     

     

     

    FRAME AND SHOCK SPECIFICATIONS

    • FRAME M29 Monocoque Carbon Frame
    • Optimized Layup Carbon fiber
    • Carbon top link
    • Titanium hardware
    • Internal shift and brake routing
    • ISCG05 mounts
    • Flak guard armor

     

    FORK

    N/A

    SHOCK

    Fox Factory Float X2 / 250MM x 70MM

     

     

     

  • sale

    D-RIG WHEELED BAG

    kn2,779.00 kn2,509.00

    D-RIG WHEELED BAG Dainese by OGIO. From the suit to the helmet, to the gloves and boots, this large bag can host all that’s necessary for the track, keeping your gear protected and safe.

     

    CHARACTERISTICS

     

    • Capacity: 123 L
    • Heavy duty oversized wheels with extra clearance
    • iFOM (integrated foam) construction throughout for added gear protection
    • Large main compartment with adjustable dividers and padded helmet chamber
    • Secure hold compression strap system
    • Several multi-use LID compartments for apparel and smaller gear
    • SLED (Structural Load Equalizing Deck)
    • System for increased durability and handling in the harshest of conditions
    • Telescoping pull handle
    • Wide mouth LID opening for easy access to all gear compartments

     

     

    COMPOSITION

    100% Polyester

  • sale

    Pro 4 Boost 110mm Front Hub

    kn669.00 kn602.00

     Shares the same benchmark quality as our standard Pro 4 front hub but in a wider design to suit Boost 110mm compatible forks.

    Key Features

    • Sealed stainless Steel cartridge bearings
    • Hub shell machined from forged aluminium billet
    • Standard 6 bolt disc fitting
    • Larger spoke flange to enable stiffer wheel builds
    • Unsurpassed reliability
    • Available in both standard 15mm, 20mm and Torq end cap options

    Pro 4 Boost 110mm Front hub Tech Specs

    • Hub flanges are moved outboard 5mm compared to the standard 100m front hub to increase wheel stiffness
    • Available Black, Silver, Red, Blue, Purple and Orange
    • Available in 28, 32 and 36 hole drillings
    • Machined from forged 2014 T6 Aluminium billet
    • Conversions available for 15mm Boost, 20mm Boost and Torq
    • Weight: 188g (32h option)
    • **Note**Boost 110mm front hub uses a different, wider hub body compared to the standard 100mm Pro 4 front hub

     

     

    How to convert a Pro 4 Front hub

     

     

    How to service a Pro 4 Front hub

RADNO VRIJEME

10:00 - 18:00

KONTAKT

Pantovčak 59, 10 000 Zagreb,
Hrvatska

nino.ruzicka@gmail.com

+385 91 505 1959