sale

29er mtb MX935EN 35mm wide 23.5mm deep carbon rim – 460g

kn1,949.00

This enduro 29er carbon rim is enhanced version base on trail 35mm wide rim, more stiff, durable and long lasting, which is perfect for all mountain and enduro mountain bicycle.

Rim Specs:

Item:	MX935EN	Use:	Enduro, AM
Size:	29″	Rim type:	Hookless
Material:	Toray T700 carbon fiber	Tubeless ready:	Yes
Weight:	460g±20	Weave:	UD / 3K / 6K
Max weight limit:	125kgs	Finish:	Matte / Gloss
Width:	35mm external, 29mm internal	Depth:	23.5mm
Spoke hole drilling:	Center, 7 deg	ERD:	598mm
Tire size:	2.35″~2.5″	Brake type:	Disc
Spoke hole:	18 / 20 / 24 / 28 / 32 / 36	Assembly hole diameter:	8.5mm
Valve hole diameter:	6.5mm	Max spoke tension:	140kgf (recommended 110-130kgf)
Max / Min tire pressure:	60psi (4.1bar) / 25psi (1.75bar)	Cycling tire pressure:	40psi / 2.76bar (recommended max)

*Angled holes allows the nipple to pull straight in line with the spoke for reduced stress. This results in fewer broken spokes and nipples.

* For unique hole drilling and alternate options, please contact us for special orders.

* If you have any special requirement like rim in 3k twill, 6k, marble finish surface, custom painting etc., please contact us at sales@carbonalbike.com. Since we manufacture every single one of the rim in our own factory, we have the ability to get you our rims with custom finishes, hole counts, or graphics.

* Carbonal warrants its products to be free from manufacturing defects for a period of 5-years after original date of purchase.

And we understand that accidents and damage can happen, if in case of bad luck, Carbonal supports you by offering replacement product

with 15% discount on the current price of products within 2 years.

Features:

	One Piece Molding, a rim is made by one piece long carbon fiber, no wrinkles, to make the strength of rim is the strongest.
	Super Lightweight Tec, constructed with premium Toray T700 carbon fiber, precise layup, achieve a most lightweight.
	Hookless rim bead, more straight and smooth side walls, tire can touch rim walls fully. More durable and impact resistance compared to a clincher rim.
	Double Triangle Design, rim cross-sections more smooth, make rim stronger and stabilized structure.

Category: BICIKLI BIKE SHOP carbonal DIJELOVI ZA BICIKLE MTB obruči

Recenzije (0)

Recenzije

Još nema recenzija.

Samo logirani kupci koji su kupili ovaj proizvod mogu napisati recenziju.

Related Products

sale

DAINESE 9FIFTY WOOL SNAPBACK CAP

~~kn289.00~~ kn260.00

The cutting-edge cap by Dainese.

Classic contours. Dainese design. And warm, too!

CHARACTERISTICS

Flat visor

Snapback closure

COMPOSITION

100% Polyester
sale

DAINESE CUFF BEANIE

~~kn239.00~~ kn219.00

COMPOSITION

100% Acrylic

MAIN MATERIALS

100% Acrylic knit

Nukeproof Reactor 290 Alloy Bike 2021

kn28,879.00 – kn35,719.00

From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.

To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.

Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?

All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.

Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents
Rail – The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.
To ensure the bike could climb as well as it descends, we designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.

FEATURES

Aggressive Trail Bike
Hydro-formed 6061 Triple-Butted Aluminium Frame
130mm Rear Travel
2 Position Trail/Rail Flip Chip, Swinglink Driven 4 Bar Horst Link Suspension, with custom tuned shock.
148mm Boost rear spacing
Sizes Available: Medium, Large, Extra Large

FULL SPECS

	COMP	PRO	FRAME ONLY
FRAME	Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection	Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection	Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection
FORK	Marzocchi Bomber Z2, 140mm, 44mm Offset, BOOST, RAIL Damper, Gloss Black (SHORT ID: D6S2)	RockShox Pike Select + Charger 2 RC 140mm, 42mm Offset, BOOST, Debonair, Gloss Black
SHOCK	RockShox Super Deluxe Select R, Custom ML Tune, 210x50mm, Bearing End, 1x bottomless token fitted.	RockShox Super Deluxe Select+ RT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted.	RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted
FRONT WHEEL	Sun-Ringle Duroc 35 Comp 29″, 15x110mm	Nukeproof Neutron V2 29″, Tubeless Ready, 32h, 110x15mm
REAR WHEEL	Sun-Ringle Duroc 35 Comp 29″, Shimano Microspline Driver, 148x12mm	Nukeproof Neutron V2 29″, Tubeless Ready, 32h, SRAM XD Driver with 36 points of engagement, 148x12mm
TYRES	Front: Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR	Front: Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR
CRANKSET	Shimano Deore M6100 12 Speed Crank, 170mm, 30T, 52mm Chainline	: SRAM GX Eagle 12-Speed, 170mm, 30T, B148, DUB
SHIFTER	Shimano Deore M6100-IR, 12-speed Rapidfire Plus, I-Spec EV	SRAM GX Eagle 12-Speed
REAR DERAILEUR	Shimano Deore M6100, SGS 12-Speed, Shadow Plus	SRAM GX Eagle 12-Speed
CHAIN	Shimano Deore M6100 12-Speed	SRAM GX Eagle 12-Speed
CASSETTE	Shimano Deore M6100 12-Speed (HYPERGLIDE+), 10-51T	SRAM GX Eagle 12-Speed, CS XG1275 EAGLE 10-52T
BRAKES	Shimano SLX M7120, 4 Pot Brake, Metallic Pads with Fins	SRAM Guide RE
FRONT ROTOR	Shimano SM-RT66, 203mm	SRAM Centreline, 200mm
REAR ROTOR	Shimano SM-RT66, 180mm	SRAM Centreline, 180mm
HANDLEBARS	Nukeproof Neutron V2 25mm Rise, Width – M780mm, L800mm, XL800mm)	Nukeproof Horizon V2 25mm Rise, Width – M780mm, L800mm, XL800mm)
STEM	Nukeproof Neutron AM, 45mm, black	Nukeproof Neutron AM, 45mm, black
SADDLE	Nukeproof Horizon SL, Black	Nukeproof Horizon SL, Black
SEATPOST	Brand X Ascend internal, 31.6mm, M:150mm drop; L/XL: 170mm Drop	Brand X Ascend internal, 31.6mm, M:150mm drop; L/XL: 170mm Drop
HEADSET	Nukeproof, 44-56 IITS	Nukeproof, 44-56 IITS	Nukeproof, 44-56 IITS
GRIPS	Nukeproof Sam Hill Signature	Nukeproof Sam Hill Signature
BEARINGS	Enduro Bearings	Enduro Bearings	Enduro Bearings
WEIGHT (SIZE MEDIUM)	15Kgs/33lbs (Tubeless)	14.4Kgs/31.7lbs (Tubeless)	3.77Kgs/8.3lbs (Medium)

GEOMETRY & SIZING

	MEDIUM	LARGE	X-LARGE	X-LARGE
(A) REACH	451	480	514	514
(B) STACK	615	620	625	625
(C) EFFECTIVE TOP TUBE LENGTH	610	640	675	675
(D) SEATTUBE LENGTH	420	458	508	508
(E) EFFECTIVE SEATTUBE ANGLE	75.5° (Low 75°)	75.5° (Low 75°)	75.5° (Low 75°)	75.5° (Low 75°)
(F) SEATTUBE ANGLE (ACTUAL)	71° (Low 70.5°)	71° (Low 70.5°)	71° (Low 70.5°)	71° (Low 70.5°)
(G) SADDLE HEIGHT AT SADDLE OFFSET	700	750	850	–
(H) SADDLE OFFSET AT SADDLE HEIGHT	180.11	196.07	228.33	–
(I) HEADTUBE LENGTH	105	110	115	115
(J) HEADTUBE ANGLE	66° (Low 65.5)	66° (Low 65.5)	66° (Low 65.5)	66° (Low 65.5)
(K) CHAINSTAY LENGTH	440	440	440	440
(L) FRONT CENTRE	762.5	792	830	830
(M) WHEELBASE	1205	1235	1271	1271
(N) BOTTOM BRACKET DROP	-33 (Low -39)	-33 (Low -39)	-33 (Low -39)	-33 (Low -39)
(O) BOTTOM BRACKET HEIGHT	336 (Low 330)	336 (Low 330)	336 (Low 330)	336 (Low 330)
(P) STAND OVER HEIGHT	733/728	728/735	736/741	769 (High)
(Q) FORK TRAVEL	140	140	140	140
(R) TRAIL	108.62	108.62	108.62	–
(S) FORK OFFSET	44	44	44	44
(T) AXLE TO CROWN	554	554	554	554
(U) MAXIMUM SEATPOST INSERT	215	250	300	300

*All dimensions in mm unless otherwise stated

RECOMMENDED SIZING

FRAME SPEC

Material:	Hydroformed 6061 Triple-Butted Aluminium
Fork Travel:	140mm (RS 150mm)
Axle to Crown:	554mm (RS 564mm)
Fork Offset:	44mm
Rear Travel:	130mm
Wheels Size:	29″
Max Tyre Size:	2.6″
Recommended Shock Sag (Measured seated):	30%
Shock Size:	210x50mm
Shock Hardware F:	25x8mm
Shock Hardware R:	30x8mm
Sizing:	M/L/XL
Headtube:	44-56mm Tapered Semi-Integrated
Headset:	ZS44-28.6 – T2 / ZS56/40 – B8
Bearings Required:	2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS)
Seatpost:	31.6mm (Internal Routing for Dropper Seatpost)
Seat Clamp:	34.9mm
BB:	Threaded 73mm BSA
Rear Hub:	Boost 148x12mm
Rear Axle:	Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm)
Chain Guide:	ISCG05
Brake Mount:	180mm Direct Post
Protection:	3D Contoured Rubber Frame Protection for DT/SS/CS

sale
TACTIC GLOVES

~~kn279.00~~ kn259.00
Slip-on glove with flexible micro-injected outer knuckle pad.

Superior protection doesn’t have to come at the cost of comfort or control. The minimalistic slip-on design and one-piece palm construction create a seamless connection from rider to bike while the flexible micro-injected outer knuckle pad protects from trailside obstacles without affecting mobility.

CHARACTERISTICS

High strenght syntetic fabric palm

Micro injected knuckle inserts

Silicone screen print on palm for better grip

Slip-on

SIZE GUIDE

SIZE XXS XS S M L XL XXL

INCHES 7.0 7.5 8.0 8.5 9.0 9.5 10

CENTIMETRES 18 19 20 21.5 23 24 25

HOW TO MEASURE:

PALM CIRCUMFERENCE

The circumference of the palm is the maximum measurement taken around the hand at the fullest part, excluding the thumb.
sale
Formula CURA 4 Black brake

~~kn1,399.00~~ kn1,259.00
BEYOND THE EXPECTATIONS

With Cura 4 we set a very ambitious goal for ourselves, we tried to go beyond even our own expectations. Our direction was clear from the beginning, create a brake that had no equal in terms of power and performance, one that was made of the highest quality materials and was accessible to a vast number of riders.

The four 18mm diameter pistons of the Cura 4 provide the rider with, up until now, unimaginable power. The expanded friction surface of the pads and the increased thickness guarantee perfect modulation. With Cura 4 you will be able to have maximum control over braking power. The optimized roll-back allows for reaching that exceptional lever feeling that has already made the Cura famous.

The Cura 4 inherits its quality of materials from its smaller brother, Cura. In fact, it is a fully forged and anodized brake, a production process that guarantees structural quality, reliability over time and low weight.

TECHNICAL SPECIFICATIONS

MASTER CYLINDER

Type – Axial – Forged aluminum

Body Finish – Glossy Black / Polished / Gold

Clamp Color – Matte Black / Glossy Black

Screws – Stainless Steel

LEVER BLADE

Material – Forged Aluminum

Color – Matte Black / Glossy Black

CALIPER

Type – PM6 with 4xØ18mm pistons

Body Finish – Glossy Black / Polished / Gold

Screws – High tensile steel

Pad type – Organic

Hose lenght – 175cm (both, front and rear)

Hose finish – Matte Black

Feeling Control System – Not compatible

Speed Lock – Optional / Caliper side only

MixMaster – Optional (Shimano I-Spec B or SRAM)

Rotors – All Compatible (6H & Center Lock)

SYSTEM WEIGHT 379g

With 85cm hose, 160mm 1-piece rotor and mounting hardware

The MixMaster handlebar clamp is an option for all Formula brakes. This simple upgrade allows for the direct attachment of Shimano (I-Spec B only) and SRAM shifters on your Formula brake, giving the bike a clean look. Perfect to help de-clutter handlebars busy with the many clamps today’s bikes employ.

Speed Lock technology allows for the disconnection and connection of the hose multiple times without losing fluid or introducing air into the brake. The Speed Lock hose is the best option for internally routed frames, the traveler who packs their bike, or anyone who is constantly assembling/disassembling their bike.

We are proud to introduce our new disc. After more than three years of development we have arrived at a design that combines the best of all the “must have” features in a disc: extreme lateral stiffness that guarantees impact resistance by protecting the disk from unwanted damage; reduced unwanted noise caused by friction; a special anti-noise design which reduces the risk of resonance and vibrations; reduced pad wear.

sale

HG KAINDY SS

~~kn519.00~~ kn469.00

Short-sleeved jersey with cool, lightweight construction: perform to your best even on the hottest of days.

Jerseys in the Dainese HG line are designed and developed to offer every rider the possibility to express their full potential and keep pushing beyond their limits.The HG KAINDY is designed to feel fresh and pass unnoticed on the skin, making it an ideal layer for the hottest summer days when breathability and ventilation really make a difference, giving you the comfort and confidence you need to achieve your best performance.

GENERAL TECHNICAL FEATURES

Crew neck
Short sleeves
Standard Fit

MATERIALS

85% Polyester

15% Elastane (Chest)

HOW TO MEASURE YOURSELF

CHEST

Circumference of the chest.
The circumference of the chest is the maximum measurement taken around the chest when standing upright and breathing normally. The tape measure is passed around the chest at the level of the shoulder blades, below the armpits.

WAIST

Circumference of the waist.
The circumference of the waist is measured by passing the tape measure on the waistline between the ribs and the pelvis just above the hip bones. Take the measurement when standing upright and breathing normally with the abdomen relaxed.

ARM

Sleeve length.
This is the distance between the outside of the shoulder (humerus) and the wrist when the arm is relaxed.

HIP

Circumference of the hips.
The circumference of the hips is measured horizontally around the part of the pelvis that protrudes most.

MAN

CENTIMETRES

ALPHA	XS	S	M	L	XL	XXL	XXXL
EURO	42	44/46	48	50/52	54	56/58	60
USA-UK	32	34/36	38	40/42	44	46/48	50
HEIGHT	163–167.5	167.5–172	172–176	176–180	180–184	184–188	188–189
CHEST	81–87	87–93	93–99	99–105	105–111	111–117	117–123
WAIST	69–75	75–81	81–87	87–93	93–99	99–105	105–111
ARM	56–57	57–58.5	58.5–60	60–61	61–62	62–62.5	62.5–63
HIP	83–89	89–95	95–101	101–107	107–113	113–119	119–125

INCHES

ALPHA	XS	S	M	L	XL	XXL	XXXL
EURO	42	44/46	48	50/52	54	56/58	60
USA-UK	32	34/36	38	40/42	44	46/48	50
HEIGHT	64.2–65.9	65.9–67.7	67.7–69.3	69.3–70.9	70.9–72.4	72.4–74.0	74.0–74.4
CHEST	31.9–34.3	34.3–36.6	36.6–39.0	39.0–41.3	41.3–43.7	43.7–46.1	46.1–48.4
WAIST	27.2–29.5	29.5–31.9	31.9–34.3	34.3–36.6	36.6–39.0	39.0–41.3	41.3–43.7
ARM	22.0–22.4	22.4–23.0	23.0–23.6	23.6–24.0	24.0–24.4	24.4–24.6	24.6–24.8
HIP	32.7–35.0	35.0–37.4	37.4–39.8	39.8–42.1	42.1–44.5	44.5–46.9	46.9–49.2

* AWA BLACK – PONCHO: M (42 – 48), L (50 – 60)

WOMAN

CENTIMETRES

ALPHA	XXS	XS	S	M	L	XL
US	6	8	10	12	14	16
HEIGHT	157–160	160–163	163–166	166–169	169–172	172–175
CHEST	72–76	76–80	80–84	84–88	88–92	92–96
WAIST	56–60	60–64	64–68	68–72	72–76	76–80
ARM	51–52	52–54	54–55	55–57	57–58	58–59
HIP	82–86	86–90	90–94	94–98	98–102	102–106

INCHES

ALPHA	XXS	XS	S	M	L	XL
US	6	8	10	12	14	16
HEIGHT	61.8–63.0	63.0–64.2	64.2–65.4	65.4–66.5	66.5–67.7	67.7–68.9
CHEST	28.3–29.9	29.9–31.5	31.5–33.1	33.1–34.6	34.6–36.2	36.2–37.8
WAIST	22.0–23.6	23.6–25.2	25.2–26.8	26.8–28.3	28.3–29.9	29.9–31.5
ARM	20.1–20.5	20.5–21.3	21.3–21.7	21.7–22.4	22.4–22.8	22.8–23.2
HIP	32.3–33.9	33.9–35.4	35.4–37.0	37.0–38.6	38.6–40.2	40.2–41.7

Kolačić	Trajanje	Opis
cookielawinfo-checkbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checkbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.