INTENSE 2020 CARBINE FACTORY FRAME AND SHOCK

SKU: N/A.

kn21,399.00

ROLL OVER THE TOUGHEST TERRAIN WITH SPEED AND CONFIDENCE. WITH JS ENDURO LINK SUSPENSION, 155MM OF TRAVEL, AND 29″ WHEELS, THE CARBINE IS READY TO CONQUER THE TRAIL OR MOUNTAIN BIKE PARK.

The Carbine Factory frameset comes with an optimized UD Carbon fiber front and rear triangle, a carbon top link and steel hardware.

QUICK STANDOUTS

TRAVEL (FRONT/REAR):	160mm/155mm
WHEEL SIZE:	29″
INCLUDES:	Frame, upper & lower links, hardware and shock
FRAME WEIGHT:	2,7 Kg. w/out shock
HT ANGLE:	65.5 ̊
REACH:	410mm/16.1″ (Small) // 431mm/17.0″ (Medium) // 455mm/17.9″ (Large) // 471mm/18.5″ (XL)

FRAME AND SHOCK SPECIFICATIONS

FRAME

Carbine 29” Enduro Optimized Carbon Frame
Carbon top link, internal shift, dropper post and brake routing
ISCG05 mounts, flack guard armour, 155mm travel

SHOCK

Fox Factory Float X2
230x60mm (155mm travel)
2-position (open/firm)

*Parts/Spec are subject to change without notice.

FIND YOUR SIZING

GEOMETRY (MM / INCH)
SIZE	Small	Medium	Large	Extra Large
A: SEAT TUBE LENGTH	385 15.2	418 16.5	448 17.6	483 19.0
B: EFFECTIVE TOP TUBE	603 23.7	627 24.7	655 25.8	675 26.6
C: STACK	616 24.3	624 24.6	632 24.9	641 25.2
D: REACH	410 16.1	431 17.0	455 17.9	471 18.5
E: BB HEIGHT	348 13.7	348 13.7	348 13.7	348 13.7
F: BB DROP	0.0	0.0	0.0	0.0
G: HEAD TUBE LENGTH	92 3.6	100 3.9	110 4.3	120 4.7
H: HEAD TUBE ANGLE	65.5 °	65.5 °	65.5 °	65.5 °
I: SEAT TUBE ANGLE	74.0 °	74.0 °	74.0 °	74.0 °
J: STANDOVER HEIGHT	830 32.7	834 32.8	834 32.8	836 32.9
K: CHAINSTAY LENGTH	445 17.5	445 17.5	445 17.5	445 17.5
L: WHEELBASE	1181 46.5	1205 47.4	1233 48.5	1253 49.3
SUGGESTED RIDER HEIGHT	5’0″-5’6″	5’5″-5’10”	5’9″-6’1″	5’11”-6’6″

Category: BICIKLI BIKE SHOP DIJELOVI ZA BICIKLE enduro MTB okvir bicikla

Dodatne informacije
Recenzije (0)

Additional Information

Color	GLOSS RED/BLUE, MATTE BLACK/GREY
Size	M

Recenzije

Još nema recenzija.

Samo logirani kupci koji su kupili ovaj proizvod mogu napisati recenziju.

Related Products

sale

Nukeproof Reactor 290 Alloy Bike 2021

kn21,689.00 – kn27,309.00

From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.

To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.

Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?

All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.

Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents
Rail – The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.
To ensure the bike could climb as well as it descends, we designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.

FEATURES

Aggressive Trail Bike
Hydro-formed 6061 Triple-Butted Aluminium Frame
130mm Rear Travel
2 Position Trail/Rail Flip Chip, Swinglink Driven 4 Bar Horst Link Suspension, with custom tuned shock.
148mm Boost rear spacing
Sizes Available: Medium, Large, Extra Large

FULL SPECS

	COMP	PRO	FRAME ONLY
FRAME	Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection	Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection	Nukeproof Reactor 290 Alloy, 130mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection
FORK	Marzocchi Bomber Z2, 140mm, 44mm Offset, BOOST, RAIL Damper, Gloss Black (SHORT ID: D6S2)	RockShox Pike Select + Charger 2 RC 140mm, 42mm Offset, BOOST, Debonair, Gloss Black
SHOCK	RockShox Super Deluxe Select R, Custom ML Tune, 210x50mm, Bearing End, 1x bottomless token fitted.	RockShox Super Deluxe Select+ RT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted.	RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x50mm, Bearing End, 1x bottomless token fitted
FRONT WHEEL	Sun-Ringle Duroc 35 Comp 29″, 15x110mm	Nukeproof Neutron V2 29″, Tubeless Ready, 32h, 110x15mm
REAR WHEEL	Sun-Ringle Duroc 35 Comp 29″, Shimano Microspline Driver, 148x12mm	Nukeproof Neutron V2 29″, Tubeless Ready, 32h, SRAM XD Driver with 36 points of engagement, 148x12mm
TYRES	Front: Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR	Front: Maxxis Assegai 29”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 29”x2.4 WT 3C MaxxTerra/EXO+/TR
CRANKSET	Shimano Deore M6100 12 Speed Crank, 170mm, 30T, 52mm Chainline	: SRAM GX Eagle 12-Speed, 170mm, 30T, B148, DUB
SHIFTER	Shimano Deore M6100-IR, 12-speed Rapidfire Plus, I-Spec EV	SRAM GX Eagle 12-Speed
REAR DERAILEUR	Shimano Deore M6100, SGS 12-Speed, Shadow Plus	SRAM GX Eagle 12-Speed
CHAIN	Shimano Deore M6100 12-Speed	SRAM GX Eagle 12-Speed
CASSETTE	Shimano Deore M6100 12-Speed (HYPERGLIDE+), 10-51T	SRAM GX Eagle 12-Speed, CS XG1275 EAGLE 10-52T
BRAKES	Shimano SLX M7120, 4 Pot Brake, Metallic Pads with Fins	SRAM Guide RE
FRONT ROTOR	Shimano SM-RT66, 203mm	SRAM Centreline, 200mm
REAR ROTOR	Shimano SM-RT66, 180mm	SRAM Centreline, 180mm
HANDLEBARS	Nukeproof Neutron V2 25mm Rise, Width – M780mm, L800mm, XL800mm)	Nukeproof Horizon V2 25mm Rise, Width – M780mm, L800mm, XL800mm)
STEM	Nukeproof Neutron AM, 45mm, black	Nukeproof Neutron AM, 45mm, black
SADDLE	Nukeproof Horizon SL, Black	Nukeproof Horizon SL, Black
SEATPOST	Brand X Ascend internal, 31.6mm, M:150mm drop; L/XL: 170mm Drop	Brand X Ascend internal, 31.6mm, M:150mm drop; L/XL: 170mm Drop
HEADSET	Nukeproof, 44-56 IITS	Nukeproof, 44-56 IITS	Nukeproof, 44-56 IITS
GRIPS	Nukeproof Sam Hill Signature	Nukeproof Sam Hill Signature
BEARINGS	Enduro Bearings	Enduro Bearings	Enduro Bearings
WEIGHT (SIZE MEDIUM)	15Kgs/33lbs (Tubeless)	14.4Kgs/31.7lbs (Tubeless)	3.77Kgs/8.3lbs (Medium)

GEOMETRY & SIZING

	MEDIUM	LARGE	X-LARGE	X-LARGE
(A) REACH	451	480	514	514
(B) STACK	615	620	625	625
(C) EFFECTIVE TOP TUBE LENGTH	610	640	675	675
(D) SEATTUBE LENGTH	420	458	508	508
(E) EFFECTIVE SEATTUBE ANGLE	75.5° (Low 75°)	75.5° (Low 75°)	75.5° (Low 75°)	75.5° (Low 75°)
(F) SEATTUBE ANGLE (ACTUAL)	71° (Low 70.5°)	71° (Low 70.5°)	71° (Low 70.5°)	71° (Low 70.5°)
(G) SADDLE HEIGHT AT SADDLE OFFSET	700	750	850	–
(H) SADDLE OFFSET AT SADDLE HEIGHT	180.11	196.07	228.33	–
(I) HEADTUBE LENGTH	105	110	115	115
(J) HEADTUBE ANGLE	66° (Low 65.5)	66° (Low 65.5)	66° (Low 65.5)	66° (Low 65.5)
(K) CHAINSTAY LENGTH	440	440	440	440
(L) FRONT CENTRE	762.5	792	830	830
(M) WHEELBASE	1205	1235	1271	1271
(N) BOTTOM BRACKET DROP	-33 (Low -39)	-33 (Low -39)	-33 (Low -39)	-33 (Low -39)
(O) BOTTOM BRACKET HEIGHT	336 (Low 330)	336 (Low 330)	336 (Low 330)	336 (Low 330)
(P) STAND OVER HEIGHT	733/728	728/735	736/741	769 (High)
(Q) FORK TRAVEL	140	140	140	140
(R) TRAIL	108.62	108.62	108.62	–
(S) FORK OFFSET	44	44	44	44
(T) AXLE TO CROWN	554	554	554	554
(U) MAXIMUM SEATPOST INSERT	215	250	300	300

*All dimensions in mm unless otherwise stated

RECOMMENDED SIZING

FRAME SPEC

Material:	Hydroformed 6061 Triple-Butted Aluminium
Fork Travel:	140mm (RS 150mm)
Axle to Crown:	554mm (RS 564mm)
Fork Offset:	44mm
Rear Travel:	130mm
Wheels Size:	29″
Max Tyre Size:	2.6″
Recommended Shock Sag (Measured seated):	30%
Shock Size:	210x50mm
Shock Hardware F:	25x8mm
Shock Hardware R:	30x8mm
Sizing:	M/L/XL
Headtube:	44-56mm Tapered Semi-Integrated
Headset:	ZS44-28.6 – T2 / ZS56/40 – B8
Bearings Required:	2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS)
Seatpost:	31.6mm (Internal Routing for Dropper Seatpost)
Seat Clamp:	34.9mm
BB:	Threaded 73mm BSA
Rear Hub:	Boost 148x12mm
Rear Axle:	Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm)
Chain Guide:	ISCG05
Brake Mount:	180mm Direct Post
Protection:	3D Contoured Rubber Frame Protection for DT/SS/CS

sale

AWA BLACK TEE

~~kn439.00~~ kn399.00

Youthful and stylish, the AWA BLACK T-shirt offers a comfortable fit even on the hottest days. Designed with summer commuters in mind, it guarantees maximum freshness and quick drying in all conditions.
The cellulose fabric is silky soft to the touch and eco-friendly as well. Elastane fibers lend stretch to the shirt which hugs the rider’s body for a superior fit and comfort even during energetic pedaling.

High-tech, paired with a minimalist look, makes it perfect for any city experience, in the saddle or not.

GENERAL TECHNICAL FEATURES

Crew neck
Standard Fit

MATERIALS

10% Elastane
90% Micromodal

HOW TO MEASURE YOURSELF

CHEST

Circumference of the chest.
The circumference of the chest is the maximum measurement taken around the chest when standing upright and breathing normally. The tape measure is passed around the chest at the level of the shoulder blades, below the armpits.

WAIST

Circumference of the waist.
The circumference of the waist is measured by passing the tape measure on the waistline between the ribs and the pelvis just above the hip bones. Take the measurement when standing upright and breathing normally with the abdomen relaxed.

ARM

Sleeve length.
This is the distance between the outside of the shoulder (humerus) and the wrist when the arm is relaxed.

HIP

Circumference of the hips.
The circumference of the hips is measured horizontally around the part of the pelvis that protrudes most.

MAN

CENTIMETRES

ALPHA	XS	S	M	L	XL	XXL	XXXL
EURO	42	44/46	48	50/52	54	56/58	60
USA-UK	32	34/36	38	40/42	44	46/48	50
HEIGHT	163–167.5	167.5–172	172–176	176–180	180–184	184–188	188–189
CHEST	81–87	87–93	93–99	99–105	105–111	111–117	117–123
WAIST	69–75	75–81	81–87	87–93	93–99	99–105	105–111
ARM	56–57	57–58.5	58.5–60	60–61	61–62	62–62.5	62.5–63
HIP	83–89	89–95	95–101	101–107	107–113	113–119	119–125

INCHES

ALPHA	XS	S	M	L	XL	XXL	XXXL
EURO	42	44/46	48	50/52	54	56/58	60
USA-UK	32	34/36	38	40/42	44	46/48	50
HEIGHT	64.2–65.9	65.9–67.7	67.7–69.3	69.3–70.9	70.9–72.4	72.4–74.0	74.0–74.4
CHEST	31.9–34.3	34.3–36.6	36.6–39.0	39.0–41.3	41.3–43.7	43.7–46.1	46.1–48.4
WAIST	27.2–29.5	29.5–31.9	31.9–34.3	34.3–36.6	36.6–39.0	39.0–41.3	41.3–43.7
ARM	22.0–22.4	22.4–23.0	23.0–23.6	23.6–24.0	24.0–24.4	24.4–24.6	24.6–24.8
HIP	32.7–35.0	35.0–37.4	37.4–39.8	39.8–42.1	42.1–44.5	44.5–46.9	46.9–49.2

* AWA BLACK – PONCHO: M (42 – 48), L (50 – 60)

WOMAN

CENTIMETRES

ALPHA	XXS	XS	S	M	L	XL
US	6	8	10	12	14	16
HEIGHT	157–160	160–163	163–166	166–169	169–172	172–175
CHEST	72–76	76–80	80–84	84–88	88–92	92–96
WAIST	56–60	60–64	64–68	68–72	72–76	76–80
ARM	51–52	52–54	54–55	55–57	57–58	58–59
HIP	82–86	86–90	90–94	94–98	98–102	102–106

INCHES

ALPHA	XXS	XS	S	M	L	XL
US	6	8	10	12	14	16
HEIGHT	61.8–63.0	63.0–64.2	64.2–65.4	65.4–66.5	66.5–67.7	67.7–68.9
CHEST	28.3–29.9	29.9–31.5	31.5–33.1	33.1–34.6	34.6–36.2	36.2–37.8
WAIST	22.0–23.6	23.6–25.2	25.2–26.8	26.8–28.3	28.3–29.9	29.9–31.5
ARM	20.1–20.5	20.5–21.3	21.3–21.7	21.7–22.4	22.4–22.8	22.8–23.2
HIP	32.3–33.9	33.9–35.4	35.4–37.0	37.0–38.6	38.6–40.2	40.2–41.7

sale

HG HALLERBOS SOCKS

~~kn199.00~~ kn179.00

Seamless bike socks for maximum comfort and breathability.

Enjoy maximum comfort and breathability, for superior performance.
HG HALLERBOS seamless socks are made from a single thread, making them extremely light and allowing the thickness to vary. This means that the areas most subject to wear, such as heel and toes, can be reinforced and the breathability is increased where it’s needed most – shin, instep, and sole. The medium size is perfect for a range of uses, from Trail to Downhill.

CHARACTERISTICS

Seamless construction

GENERAL TECHNICAL FEATURES

Reinforced heel and toes sections

MATERIALS

90% Polyester 10% Elastane

BIKE SOCKS – SIZE GUIDE

SIZE S M L

EU 36 – 38 39 – 42 43 – 45

US 4 – 6 7 – 9 9.5 – 11

INTENSE 2020 M16 FACTORY FRAME AND SHOCK

kn21,399.00

THE M16 IS A WORLD-CUP PROVEN DOWNHILL RACING MACHINE. IT IS THE CULMINATION OF DECADES OF R&D THAT BEGAN WITH IT’S FAMOUS PREDECESSOR, THE M1, AND HAS EVOLVED THROUGHOUT THE GENERATIONS OF M.

The M16 was introduced in 2016 and it was the first full-carbon downhill bike introduced INTENSE. With 27.5” wheels, the M16 remains an important race-ready model in the INTENSE line-up for those looking for a quality downhill bike with premium components and featuring the smaller wheel size.
Since the initial M16 model was released, the INTENSE Factory Racing team and INTENSE engineers have worked closely together to retune the kinematics of the bike for improved agility and handling over a variety of terrain. The fixed geometry of the bike compliments the bike’s new metric shock, which is longer than the predecessor for better overall stability and feeling, especially in race conditions. The geometry has been further improved and the bike has a slacker head angle, with a lower BB than the previous model. The M16 now boasts an ‘FRO’ (For Racing Only) bottom link, which works in harmony with the revised kinematics, geometry and metric shock on the bike, offering a premium riding experience thanks to INTENSE’s high-quality engineering. We put a lot of thought into the process of improving this already-impressive downhill model, and thanks to our accessibility to the toughest arenas in the world with some of the leading athletes on the planet, the M16 is a more complete and an even more race defined package for those looking for a 27.5” downhill bike. For 2020 the bike has a new striking look in the high-quality finish expected from INTENSE.

All bikes come pre-built and tuned through INTENSE authorized mechanics and will arrive to you with minimum assembly.

M16: FEATURES AND BENEFITS VIDEO

FRAME AND SHOCK BUILD SPECIFICATIONS

FRAME

M16 Monocoque Carbon Frame
Optimized Layup Carbon fiber
Carbon top link
Titanium hardware
Internal shift and brake routing
ISCG05 mounts
Flak guard armor

FORK

N/A

SHOCK

Fox FACTORY Float X2 / 250MM x 75MM

*Parts/Spec are subject to change without notice.

Included with each complete bike is an INTENSE branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.

GEOMETRY (MM / INCH)
SIZE	Small	Medium	Large	XL
A: SEAT TUBE LENGTH	389 mm/15.3″	414 mm/ 16.3″	431 mm/ 17″	431 mm/ 17″
B: TOP TUBE	567 mm/ 22.34″	592 mm/ 23.32″	618 mm/ 24.34″	635 mm/ 25″
C: STACK	590 mm/ 23.2″	594.6 mm / 23.4″	600.9 mm/ 23.7″	608 mm/ 23.9″
D: REACH	385.7 mm/ 15.2″	409.6 mm/ 16.1″	432.6 mm/ 17.0″	450 mm/ 17.7″
E: BB HEIGHT	362.4 mm/ 14.27″	362.4 mm/ 14.27″	362.4 mm/ 14.27″	362.4 mm/ 14.27″
F: BB DROP	Rise 8.07 mm / 0.32″	Rise 8.07 mm / 0.32″	Rise 8.07 mm / 0.32″	Rise 8.07 mm / 0.32″
G: HEAD TUBE LENGTH	110 mm/ 4.3″	115 mm/ 4.5″	122 mm/ 4.8”	132 mm/ 5.2”
H: HEAD TUBE ANGLE	63.1 ̊	63.1 ̊	63.1 ̊	63.1 ̊
I: SEAT TUBE ANGLE	72.9 ̊	72.9 ̊	72.9 ̊	72.9 ̊
J: STANDOVER HEIGHT	797 mm/ 31.4”	806.9 mm/ 31.77″	809 mm/ 31.9”	813 mm/ 32″
K: CHAINSTAY LENGTH	447.6 mm/ 17.62″	447.6 mm/ 17.62″	447.6 mm/ 17.62″	447.6 mm/ 17.62″
L: WHEELBASE	1190.5 mm/ 46.9″	1216.5 mm/ 47.9″	1242.7 mm/ 48.9″	1271 mm/ 50″

sale

DAINESE CUFF BEANIE

~~kn239.00~~ kn219.00

COMPOSITION

100% Acrylic

MAIN MATERIALS

100% Acrylic knit
sale
TACTIC GLOVES

~~kn279.00~~ kn259.00
Slip-on glove with flexible micro-injected outer knuckle pad.

Superior protection doesn’t have to come at the cost of comfort or control. The minimalistic slip-on design and one-piece palm construction create a seamless connection from rider to bike while the flexible micro-injected outer knuckle pad protects from trailside obstacles without affecting mobility.

CHARACTERISTICS

High strenght syntetic fabric palm

Micro injected knuckle inserts

Silicone screen print on palm for better grip

Slip-on

SIZE GUIDE

SIZE XXS XS S M L XL XXL

INCHES 7.0 7.5 8.0 8.5 9.0 9.5 10

CENTIMETRES 18 19 20 21.5 23 24 25

HOW TO MEASURE:

PALM CIRCUMFERENCE

The circumference of the palm is the maximum measurement taken around the hand at the fullest part, excluding the thumb.