ARTIKLI
-
2021 Nukeproof REACTOR ALLOY 275 Frame Only
kn16,959.00From concept through to design, the Kinematics, the geometry and specification; the Reactor is designed from the ground up to be the ultimate aggressive trail bike. It is at home on technical climbs, but happiest when thrashing the most technical trails you can point it at.
To optimise the weight, strength and stiffness, the Reactor Carbon frame features a full UD woven carbon fibre frameset (Including chain and seat stays). It is available for 27.5” or 29” wheel sizes. These are two totally different, compromise free frames that were designed and developed at the same time. Each frame is simply tailored around each wheel size.
Speed or play: which do you value more? The manoeuvrability of 27.5” or the raw speed of a 29”?
All Reactor frames feature a “flip chip” to adjust the geometry from “Trail” to “Rail mode”.
Trail – As the name suggests, this setting is best suited for trail riding. It is for riders who get as much enjoyment from the climb as the descents
Rail – The Rail setting turns the Reactor into a corner shredder, dropping the bottom bracket 6mm and slackening the head angle by half a degree. It is there to maximise the descending capabilities.
To ensure the bike could climb as well as it descends, we designed the 4 bar horst linkage to have higher levels of anti-squat for climbing gears but lower levels when you drop down the cassette. This means that the bike can behave itself on the climbs but when you get it up to speed, it turns into a trail hooligan. The combination of low anti-squat and progressive rate give ultimate small bump compliance (removes rough trail and root chatter) with good mid stroke support for cornering/pumping and end stroke progression for aggressive riding. Balanced anti-rise figures allow the Reactor some squat when braking hard, maintaining rider position and providing a good amount of pressure through the tyre to ensure traction. The Reactor is designed to reward the rider and ensure you get that stoke factor in on any ride.FEATURES
- Aggressive Trail Bike
- Hydro-formed 6061 Triple-Butted Aluminium Frame
- 140mm Rear Travel
- 2 Position Trail/Rail Flip Chip, Swinglink Driven 4 Bar Horst Link Suspension, with custom tuned shock.
- 148mm Boost rear spacing
- Sizes Available: Small, Medium, Large, Extra Large
FULL SPECS
COMP PRO FRAME ONLY FRAME Nukeproof Reactor 275 Alloy, 140mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection. Nukeproof Reactor 275 Alloy, 140mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection. Nukeproof Reactor 275 Alloy, 140mm Travel, custom triple butted hydro-formed tube set for front triangle and chain stays, UD woven carbon fibre Seat stays, internal cable routing, internal cable routing, ISCG 05 mount, Enduro bearings, threaded 73mm BB, Boost 148mm rear axle spacing, 3D contoured rubber frame protection. FORK Marzocchi Bomber Z2, 150mm, 44mm Offset, BOOST, RAIL Damper, Gloss Black (SHORT ID: D6S3) RockShox Pike Select + Charger 2 RC 150mm, 46mm Offset, BOOST, Debonair, Gloss Black SHOCK RockShox Super Deluxe Select R, Custom ML Tune, 210x55mm, Bearing End, 1x bottomless token fitted. RockShox Super Deluxe Select+ RT, Custom ML 320 tune, 210x55mm, Bearing End, 1x bottomless token fitted. RockShox Super Deluxe Ultimate RCT, Custom ML 320 tune, 210x55mm, Bearing End, 1x bottomless token fitted FRONT WHEEL Sun-Ringle Duroc 35 Comp 27.5″, 15x110mm Nukeproof Neutron V2 27.5″, Tubeless Ready, 32h, 110x15mm REAR WHEEL Sun-Ringle Duroc 35 Comp 27.5″, Shimano Microspline Driver, 148x12mm Nukeproof Neutron V2 27.5″, Tubeless Ready, 32h, SRAM XD Driver with 36 points of engagement, 148x12mm TYRES Front: Maxxis Assegai 27.5”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 27.5”x2.4 WT 3C MaxxTerra/EXO+/TR Front: Maxxis Assegai 27.5”x2.5 WT 3C MaxxTerra/EXO+/TR, Rear: Maxxis Dissector 27.5”x2.4 WT 3C MaxxTerra/EXO+/TR CRANKSET Shimano Deore M6100 12 Speed Crank, 170mm, 32T, 52mm Chainline SRAM GX Eagle 12-Speed, 170mm, 32T, B148, DUB SHIFTER Shimano Deore M6100-IR, 12-speed Rapidfire Plus, I-Spec EV SRAM GX Eagle 12-Speed REAR DERAILEUR Shimano Deore M6100, SGS 12-Speed, Shadow Plus SRAM GX Eagle 12-Speed CHAIN Shimano Deore M6100 12-Speed SRAM GX Eagle 12-Speed CASSETTE Shimano Deore M6100 12-Speed (HYPERGLIDE+), 10-51T SRAM GX Eagle 12-Speed, CS XG1275 EAGLE 10-52T BRAKES Shimano SLX M7120, 4 Pot Brake, Metallic Pads with Fins SRAM Guide RE FRONT ROTOR Shimano SM-RT66, 203mm SRAM Centreline, 200mm REAR ROTOR Shimano SM-RT66, 180mm SRAM Centreline, 180mm HANDLEBARS Nukeproof Neutron V2 25mm Rise, Width – M780mm, L800mm, XL800mm) Nukeproof Horizon V2 25mm Rise, Width – M780mm, L800mm, XL800mm) STEM Nukeproof Neutron AM, 45mm, black Nukeproof Neutron AM, 45mm, black SADDLE Nukeproof Horizon SL, Black Nukeproof Horizon SL, Black SEATPOST Brand X Ascend internal, 31.6mm, S: 125mm; M:150mm drop; L/XL: 170mm Drop Brand X Ascend internal, 31.6mm, S:125mm; M:150mm drop; L/XL: 170mm Drop HEADSET Nukeproof, 44-56 IITS Nukeproof, 44-56 IITS Nukeproof, 44-56 IITS GRIPS Nukeproof Sam Hill Signature Nukeproof Sam Hill Signature BEARINGS Enduro Bearings Enduro Bearings Enduro Bearings WEIGHT:(SIZE MEDIUM) 14.67kgs/32.3lbs (Tubeless) 14.1kgs/31lbs (Tubeless) 3.77Kgs/8.3lbs (Medium) GEOMETRY & SIZING
SMALL MEDIUM LARGE X-LARGE (A) REACH 425 454 482.5 516 (B) STACK 600 605 609 613.5 (C) EFFECTIVE TOP TUBE LENGTH 580 610 640 675 (D) SEATTUBE LENGTH 381 420 458 508 (E) EFFECTIVE SEATTUBE ANGLE 75.5°
(Low 75°)75.5°
(Low 75°)75.5°
(Low 75°)75.5°
(Low 75°)(F) SEATTUBE ANGLE (ACTUAL) 71°
(Low 70.5°)71°
(Low 70.5°)71°
(Low 70.5°)71°
(Low 70.5°)(G) SADDLE HEIGHT AT SADDLE OFFSET 650 700 750 850 (H) SADDLE OFFSET AT SADDLE HEIGHT 164.71 181.03 196.99 229.25 (I) HEADTUBE LENGTH 110 115 120 125 (J) HEADTUBE ANGLE 66°
(Low 65.5)66°
(Low 65.5)66°
(Low 65.5)66°
(Low 65.5)(K) CHAINSTAY LENGTH 430 430 430 430 (L) FRONT CENTRE 728 759 790 825 (M) WHEELBASE 1150 1181 1212 1247 (N) BOTTOM BRACKET DROP -18
(Low -24)-18
(Low -24)-18
(Low -24)-18
(Low -24)(O) BOTTOM BRACKET HEIGHT 336
(Low 330)336
(Low 330)336
(Low 330)336
(Low 330)(P) STAND OVER HEIGHT 723/721 721/725 722/730 725/737 (Q) FORK TRAVEL 150 150 150 150 (R) TRAIL 110.73 110.73 110.73 110.73 (S) FORK OFFSET 46 46 46 46 (T) AXLE TO CROWN 545 545 545 545 (U) MAXIMUM SEATPOST INSERT 175 215 250 300 RECOMMENDED SIZING
FRAME SPEC
Material: Hydroformed 6061 Triple-Butted Aluminium Fork Travel: 150mm (RS 160mm) Axle to Crown: 545mm (RS 555mm) Fork Offset: 46mm Rear Travel: 140mm Wheels Size: 27.5″ Max Tyre Size: 2.6″ Recommended Shock Sag (Measured seated): 30% Shock Size: 210x55mm Shock Hardware F: 25x8mm Shock Hardware R: 30x8mm Sizing: S/M/L/XL Headtube: 44-56mm Tapered Semi-Integrated Headset: ZS44-28.6 – T2 / ZS56/40 – B8 Bearings Required: 2x (6902 2RS), 4x (6800 2RS), 4x (6901 2RS) Seatpost: 31.6mm (Internal Routing for Dropper Seatpost) Seat Clamp: 34.9mm BB: Threaded 73mm BSA Rear Hub: Boost 148x12mm Rear Axle: Sram Maxle Stealth M12x1.75 180mm (Thread Length 20mm) Chain Guide: ISCG05 Brake Mount: 180mm Direct Post Protection: 3D Contoured Rubber Frame Protection for DT/SS/CS -
-
D-DAKAR HYDRATION BACKPACK
kn1,109.00kn999.00D-DAKAR HYDRATION BACKPACK Dainese by OGIO. For uncompromising travelers, the D-Dakar is designed for extreme adventure touring. With its large hydration bag you will be able to take on any adventure.
-
TACTIC GLOVES EXT
kn359.00kn329.00The extended version of the Tactic gloves provides the riders with an extra pad all over the back hand, ensuring the user to feel safe and strightly connected with the bars thanks to the pre-curved micro-injected knuckle construction.
Aggressive rides need unrestricted protection. The extended version of the Tactic gloves provides the riders with an extra pad all over the back hand, ensuring the rider to feel safe and strightly connected with the bars thanks to the pre-curved micro-injected knuckle construction.
CHARACTERISTICS
GENERAL TECHNICAL FEATURES
HOW TO MEASURE:
PALM CIRCUMFERENCE
The circumference of the palm is the maximum measurement taken around the hand at the fullest part, excluding the thumb.
-
DAINESE LP 9FIFTY DIAMOND ERA SNAPBACK
kn300.00kn270.00Classic contours in an iconic vented design. Our coolest cap in more ways than one!
CHARACTERISTICS
-
TACTIC GLOVES
kn279.00kn259.00Slip-on glove with flexible micro-injected outer knuckle pad.
Superior protection doesn’t have to come at the cost of comfort or control. The minimalistic slip-on design and one-piece palm construction create a seamless connection from rider to bike while the flexible micro-injected outer knuckle pad protects from trailside obstacles without affecting mobility.
CHARACTERISTICS
SIZE GUIDE
SIZE XXS XS S M L XL XXL INCHES 7.0 7.5 8.0 8.5 9.0 9.5 10 CENTIMETRES 18 19 20 21.5 23 24 25 HOW TO MEASURE:
PALM CIRCUMFERENCE
The circumference of the palm is the maximum measurement taken around the hand at the fullest part, excluding the thumb.
-
DAINESE 9TWENTY CANVAS STRAPBACK CAP
kn269.00kn249.00 -
D-GAMBIT BACKPACK
kn1,110.00kn999.00The top-level comfort of a city backpack with several multi-purpose pockets.
D-GAMBIT BACKPACK Dainese by OGIO. This spacious city backpack is ideal to always have everything with you, thanks to its different pockets for all uses.
CHARACTERISTICS
-
HG SOCKS
kn199.00kn179.00Seamless socks with run-resistant reinforced sections all over the heel and the toes.
The seamless construction of these socks results in a superior breathability and comfort while riding. What’s more the reinforcements placed all over the heel and toes section provide the rider with maximum abrasion resistance even after several aggressive rides. The socks feature a high cut.
BIKE SOCKS
SIZE S M L EU 36 – 38 39 – 42 43 – 45 US 4 – 6 7 – 9 9.5 – 11 -
DAINESE CUFF BEANIE
kn239.00kn219.00 -
D-RIG WHEELED BAG
kn2,779.00kn2,509.00D-RIG WHEELED BAG Dainese by OGIO. From the suit to the helmet, to the gloves and boots, this large bag can host all that’s necessary for the track, keeping your gear protected and safe.
CHARACTERISTICS
COMPOSITION
-
DAINESE 9FIFTY WOOL SNAPBACK CAP
kn289.00kn260.00The cutting-edge cap by Dainese.
Classic contours. Dainese design. And warm, too!
CHARACTERISTICS
Flat visor
Snapback closure
100% Polyester
-
HG HALLERBOS SOCKS
kn199.00kn179.00Seamless bike socks for maximum comfort and breathability.
Enjoy maximum comfort and breathability, for superior performance.
HG HALLERBOS seamless socks are made from a single thread, making them extremely light and allowing the thickness to vary. This means that the areas most subject to wear, such as heel and toes, can be reinforced and the breathability is increased where it’s needed most – shin, instep, and sole. The medium size is perfect for a range of uses, from Trail to Downhill.CHARACTERISTICS
Seamless construction
GENERAL TECHNICAL FEATURES
Reinforced heel and toes sections
MATERIALS
90% Polyester 10% Elastane
BIKE SOCKS – SIZE GUIDE
SIZE S M L EU 36 – 38 39 – 42 43 – 45 US 4 – 6 7 – 9 9.5 – 11 -
TRAIL SKINS PRO KNEE GUARDS
kn679.00kn619.00Bike knee protectors with ultra-ventilated structure, made from PRO SHAPE 2.0 for maximum freedom of movement.
The latest evolution in trail protection raises the bar yet again.
Developed on World Cup trails, Trail Skins Pro combines excellent adaptability to the form of the knee, constant ventilation and maximum protection due to the carbon-elastomer compound and ergonomic shape of the PRO SHAPE 2.0 protector that allows great freedom of movement and evenly distributes the force of any impact to the sides. The smooth surface on the side padding bolsters limits friction and facilitates sliding in the event of a fall.
Created by mapping the shape of the knee, the special sock is highly breathable and stays in place on the body during strenuous activity with no need for adjustments or position changes while riding.It fits like a second skin allowing you to reach your maximum potential while enjoying complete protection.
IT RAISES THE LEVEL OF PROTECTION, ERGONOMICS AND BREATHABILITY STANDARDS.
Developed on World Cup trails in collaboration with Enduro World Series athletes, Trail Skins Pro combines excellent adaptability to the form of the knee, ventilation and maximum protection due to the carbon-elastomer compound and ergonomic shape of the protector, which allow great freedom of movement and evenly distribute the force of any impact to the sides.
It fits like a second skin allowing you to reach your maximum potential while enjoying complete protection.CE Level CE 1621.1 LEV 1
PROTECTION
PRO-SHAPE 2 protectors are inspired by auxetics in nature, converting energy from impact into heat and dispersing 83% of the force of impact.
ERGONOMICS
The structure of the PRO-SHAPE 2 protector, inspired by auxetics, is designed to expand and contract in all directions, following every knee movement perfectly and allowing complete freedom. Control means safety.
VENTILATION
55% of the area on PRO-SHAPE 2 protectors is open, taking inspiration from auxetics. This allows constant air flow at every stage, for greater comfort and confidence even on the hottest days.
GENERAL TECHNICAL FEATURES
HOMOLOGATION
MATERIALS
PROTECTION
BIKE: SAFETY GEAR
CENTIMETRES
SIZE XS S M L XL XXL CHEST 81–87 87–93 93–99 99–105 105–111 111–117 WAIST 69–75 75–81 81–87 87–93 93–99 99–105 HIP 83–89 89–95 95–101 101–107 107–113 113–119 HEIGHT 163–167.5 167.5–172 172–176 176–180 180–184 184–188 INSEAM 76–78 78–80 80–82 82–84 84–85 85–86 ARM 56–57 57–58.5 58.5–60 60–61 61–62 62–64 INCHES
SIZE XS S M L XL XXL CHEST 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 43.7–46.1 WAIST 27.2–29.5 29.5–31.9 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 HIP 32.7–35.0 35.0–37.4 37.4–39.8 39.8–42.1 42.1–44.5 44.5–46.9 HEIGHT 64.2–65.9 65.9–67.7 67.7–69.3 69.3–70.9 70.9–72.4 72.4–74.0 INSEAM 29.9–30.7 30.7–31.5 31.5–32.3 32.3–33.1 33.1–33.5 33.5–33.9 ARM 22.0–22.4 22.4–23.0 23.0–23.6 23.6–24.0 24.0–24.4 24.4–25.2 BIKE: BACK PROTECTORS
(WAIST TO SHOULDER MEASUREMENT)
SIZE XS S M L XL XXL ARMOFORM MANIS 18.9 18.9 18.9 20.5 20.5 20.5 RHYOLITE 2 18.5 18.5 18.5 18.5 20.1 20.1 RHYOLITE 2 LITE 18.5 18.5 18.5 18.5 20.1 20.1 RIVAL VEST PRO 18.5 18.5 18.5 18.5 20.1 20.1 BIKE: KNEE PROTECTORS
CALF (10 cm below the knee cap) – THIGH (20 cm above the knee cap)
SIZE S M L XL CALF CIRCUMFERENCE 13.0 14.2 15.4 16.5 THIGH CIRCUMFERENCE 18.5 20.5 21.3 23.2 BIKE: ELBOW PROTECTORS
FOREARM (10 cm below the elbow) – BICEPS (15 cm above the elbow)
SIZE S M L XL FOREARM CIRCUMFERENCE 10.6 11.0 11.4 12.2 BICEPT CIRCUMFERENCE 11.4 12.2 12.6 13.4 -
CURA BRAKE
UNWAVERING POWER AND GREAT MODULATION
The Cura is a clean, simple, and great riding brake designed to fit all riders and their bikes. The lever, designed for the human factor, is our most ergonomic and intuitive yet. With how capable mountain bikes have become at conquering any trail our caliper is proficient in taming the bike to overcome the trail.
This new era of Formula disc brakes has given us the chance to change our status quo. The Cura is Formula’s first brake to use mineral oil. Our brake performance standards have always been out of the range for the inclusion of mineral oil. We have finally found and use a mineral oil that complements the performance of our brakes.
The Formula Cura has been designed from top to bottom with riders in mind. In our laboratory, and on the race track, we have confirmed that the Cura is an extremely powerful, wide range brake that feels comfortable from weekend warriors and Enduro riders to World Cup Downhill racers. We believe that brakes are one of the most personal and intimate parts of the bike, this is why we have simplicity and efficiency in mind when we design it.
TECHNICAL SPECIFICATIONS
MASTER CYLINDER
The MixMaster handlebar clamp is an option for all Formula brakes. This simple upgrade allows for the direct attachment of Shimano (I-Spec B only) and SRAM shifters on your Formula brake, giving the bike a clean look. Perfect to help de-clutter handlebars busy with the many clamps today’s bikes employ.
Speed Lock technology allows for the disconnection and connection of the hose multiple times without losing fluid or introducing air into the brake. The Speed Lock hose is the best option for internally routed frames, the traveler who packs their bike, or anyone who is constantly assembling/disassembling their bike.
We are proud to introduce our new disc. After more than three years of development we have arrived at a design that combines the best of all the “must have” features in a disc: extreme lateral stiffness that guarantees impact resistance by protecting the disk from unwanted damage; reduced unwanted noise caused by friction; a special anti-noise design which reduces the risk of resonance and vibrations; reduced pad wear.
-
CURA 4 BRAKE
BEYOND THE EXPECTATIONS
With Cura 4 we set a very ambitious goal for ourselves, we tried to go beyond even our own expectations. Our direction was clear from the beginning, create a brake that had no equal in terms of power and performance, one that was made of the highest quality materials and was accessible to a vast number of riders.
The four 18mm diameter pistons of the Cura 4 provide the rider with, up until now, unimaginable power. The expanded friction surface of the pads and the increased thickness guarantee perfect modulation. With Cura 4 you will be able to have maximum control over braking power. The optimized roll-back allows for reaching that exceptional lever feeling that has already made the Cura famous.
The Cura 4 inherits its quality of materials from its smaller brother, Cura. In fact, it is a fully forged and anodized brake, a production process that guarantees structural quality, reliability over time and low weight.
TECHNICAL SPECIFICATIONS
MASTER CYLINDER
- Type – Axial – Forged aluminum
- Body Finish – Glossy Black / Polished / Gold
- Clamp Color – Matte Black / Glossy Black
- Screws – Stainless Steel
LEVER BLADE
- Material – Forged Aluminum
- Color – Matte Black / Glossy Black
CALIPER
- Type – PM6 with 4xØ18mm pistons
- Body Finish – Glossy Black / Polished / Gold
- Screws – High tensile steel
- Pad type – Organic
- Hose lenght – 175cm (both, front and rear)
- Hose finish – Matte Black
- Feeling Control System – Not compatible
- Speed Lock – Optional / Caliper side only
- MixMaster – Optional (Shimano I-Spec B or SRAM)
- Rotors – All Compatible (6H & Center Lock)
SYSTEM WEIGHT 379g
With 85cm hose, 160mm 1-piece rotor and mounting hardware
The MixMaster handlebar clamp is an option for all Formula brakes. This simple upgrade allows for the direct attachment of Shimano (I-Spec B only) and SRAM shifters on your Formula brake, giving the bike a clean look. Perfect to help de-clutter handlebars busy with the many clamps today’s bikes employ.
Speed Lock technology allows for the disconnection and connection of the hose multiple times without losing fluid or introducing air into the brake. The Speed Lock hose is the best option for internally routed frames, the traveler who packs their bike, or anyone who is constantly assembling/disassembling their bike.
We are proud to introduce our new disc. After more than three years of development we have arrived at a design that combines the best of all the “must have” features in a disc: extreme lateral stiffness that guarantees impact resistance by protecting the disk from unwanted damage; reduced unwanted noise caused by friction; a special anti-noise design which reduces the risk of resonance and vibrations; reduced pad wear.
-
SPEED DEMON T-SHIRT
kn239.00kn219.00Our Speed Demon logo T-shirt in 100% cotton.
Speed Demon, the red triangle in the shape of a stylised devil, is Dainese’s symbol. It was created in 1972, when the company was founded, and is based on a faun, a figure of Roman mythology and a god of nature. In 1981, it is radically redesigned, then finally becomes what it is today after its last redesign in 2005.
COMPOSITION
100% Cotton
MAIN MATERIALS
100% Cotton
CASUAL WEAR: MAN
CENTIMETRES
ALPHA XS S M L XL XXL XXXL EURO 42 44-46 48-50 52-54 56-58 60 62 USA-UK 32 34-36 38-40 42-44 46-48 50 52 CHEST 82–86 86–94 94–102 102–110 110–118 118–122 122–126 ARM 55–56 56–58 58–60 60–62 62–63 63–64 63–64 INCHES
ALPHA XS S M L XL XXL XXXL EURO 42 44-46 48-50 52-54 56-58 60 62 USA-UK 32 34-36 38-40 42-44 46-48 50 52 CHEST 32.3–33.9 33.9–37.0 37.0–40.2 40.2–43.3 43.3–46.5 46.5–48.0 48.0–49.6 ARM 21.7–22.0 22.0–22.8 22.8–23.6 23.6–24.4 24.4–24.8 24.8–25.2 24.8–25.2 CASUAL WEAR: KIDS
CENTIMETRES
ALPHA JXXS JXS JS JM JL JXL AGE 4 6 8 10 12 14 HOW TO MEASURE YOURSELF
CHEST
Circumference of the chestThe circumference of the chest is the maximum measurement taken around the chest when standing upright and breathing normally. The tape measure is passed around the chest at the level of the shoulder blades, below the armpits.
ARM
Sleeve lengthThis is the distance between the outside of the shoulder (humerus) and the wrist when the arm is relaxed.
-
SCARABEO ELBOW GUARDS
kn399.00kn359.00Extremely light and flexible youth elbow guards.
The Scarabeo Pro-Armor pads have been specially designed to fit skinny legs and still meet the rigorous European standard for adult limb impact protectors.
GENERAL TECHNICAL FEATURES
- Adjustable Elastic band with silicone gripper
- Slip-on design
MATERIALS
- Jersey hole Highly Breathable
- Run-Resistant mesh
HOMOLOGATION
PROTECTION
SCARABEO Pro Armor Elbow pads
SIZE GUIDE
CENTIMETRES
SIZE JS JM JL AGE 6-8 9-10 11-12 HEIGHT 116–128 134–140 146–152 CHEST 52–60 64–68 72–76 WAIST 51–57 60–63 66–69 HIPS 65–71 74–77 80–83 ARM 40–44 46–48 50–52 THIGH 39–43 45–47 49–51 KNEE CIRCUMFERENCE 27.5–30 31–32.5 33.5–35 CALF CIRCUMFERENCE 23.5–26 27–28.5 29.5–31 FOREARM CIRCUMFERENCE 15–17 18–19 20–21 INCHES
SIZE JS JM JL AGE 6-8 9-10 11-12 HEIGHT 45.7–50.4 52.8–55.1 57.5–59.8 CHEST 20.5–23.6 25.2–26.8 28.3–29.9 WAIST 20.1–22.4 23.6–24.8 26.0–27.2 HIPS 25.6–28.0 29.1–30.3 31.5–32.7 ARM 15.7–17.3 18.1–18.9 19.7–20.5 THIGH 15.4–16.9 17.7–18.5 19.3–20.1 KNEE CIRCUMFERENCE 10.8–11.8 12.2–12.8 13.2–13.8 CALF CIRCUMFERENCE 9.3–10.2 10.6–11.2 11.6–12.2 FOREARM CIRCUMFERENCE 5.9–6.7 7.1–7.5 7.9–8.3 -
AWA BLACK – PANTS
kn1,109.00kn999.00The perfect recipe for an all day technical pant that, thanks to its feature is suitable from pedalling to your desk.
Ergonomic knee construction, 4 way stretch fabric, denim look. The perfect recipe for an all day technical pant that, thanks to its feature is suitable from pedalling to your desk. The pre-curved construction of the knee zone ensure the rider to don’t feel restricted while pedalling or moving, the practical features placed into the pockets allows the user to storage phone or other little objects without losing them.
GENERAL TECHNICAL FEATURES
- Anti-Drop money pocket
- DWR coated for added water repellency
- Front phone pocket
- Hi-Vis mapped zones
- Reinforced saddle area
- Snap-Hook
HOW TO MEASURE YOURSELF
WAIST
Circumference of the waist.
The circumference of the waist is measured by passing the tape measure on the waistline between the ribs and the pelvis just above the hip bones. Take the measurement when standing upright and breathing normally with the abdomen relaxed.
HIP
Circumference of the hips.
The circumference of the hips is measured horizontally around the part of the pelvis that protrudes most.
INSEAM
Inner Leg Measurement.
The distance between the lowest part of the trunk and the soles of the feet measured when standing upright with the feet slightly apart and the weight of the body evenly distributed on both legs.
SIZE GUIDE
CENTIMETRES
SIZE 28 29 30 31 32 33 34 35 36 37 38 39 EURO 40 42 44 46 48 50 52 54 56 58 60 62 US 30 32 34 36 38 40 42 44 46 48 50 52 WAIST 69–75 69–75 75–81 75–81 81–87 87–93 87–93 93–99 99–105 99–105 105–111 105–111 HIP 83–89 83–89 89–95 89–95 95–101 101–107 101–107 107–113 113–119 113–119 119–125 119–125 INSEAM 76–78 76–78 78–80 78–80 80–82 82–84 82–84 84–85 85–86 85–86 86–87 86–87 INCHES
SIZE 28 29 30 31 32 33 34 35 36 37 38 39 EURO 40 42 44 46 48 50 52 54 56 58 60 62 US 30 32 34 36 38 40 42 44 46 48 50 52 WAIST 27.2–29.5 27.2–29.5 29.5–31.9 29.5–31.9 31.9–34.3 34.3–36.6 34.3–36.6 36.6–39.0 39.0–41.3 39.0–41.3 41.3–43.7 41.3–43.7 HIP 32.7–35.0 32.7–35.0 35.0–37.4 35.0–37.4 37.4–39.8 39.8–42.1 39.8–42.1 42.1–44.5 44.5–46.9 44.5–46.9 46.9–49.2 46.9–49.2 INSEAM 29.9–30.7 29.9–30.7 30.7–31.5 30.7–31.5 31.5–32.3 32.3–33.1 32.3–33.1 33.1–33.5 33.5–33.9 33.5–33.9 33.9–34.3 33.9–34.3 -
HG GRYFINO SHORTS
kn879.00kn799.00Ultra-breathable stretch shorts for maximum freedom of movement on all terrain.
Ergonomics, breathability, comfort and practicality, for performance worthy of champions wherever you ride.
These shorts are made of highly breathable four-way elasticated nylon. This fabric follows the rider’s movements perfectly, both when pedaling and downhill, to guarantee great freedom of movement and ventilation, like a genuine second skin.
Exclusive HookFit™ technology means that the shorts can be fastened and the waist adjusted in a single, simple movement. The large side pockets with zippers offer convenient storage for small items and even a multi-tool. The practical right thigh pocket is ideal for a map, smartphone or energy bar.
The Dainese HookButton™ system allows you to attach HG CADDO gloves when you prefer to tackle climbs without them in warmer weather. They offer practical innovation for your best performance.GENERAL TECHNICAL FEATURES
- 4 Way stretch
- Hook Botton ™ Gloves fastener
- Hook Fit™ systeme for size adjustment and fastening
- Map pocket
- Smartphone pocket
MATERIALS
- 11% Polyurethane
- 89% Nylon
HOW TO MEASURE YOURSELF
HIP
Circumference of the hips.
The circumference of the hips is measured horizontally around the part of the pelvis that protrudes most.
INSEAM
Inner Leg Measurement.
The distance between the lowest part of the trunk and the soles of the feet measured when standing upright with the feet slightly apart and the weight of the body evenly distributed on both legs.SIZE GUIDE
MAN
CENTIMETRES
ALPHA XS S M L XL XXL XXXL EURO 42 44 46/48 50/52 54 56/58 60 USA-UK 32 34/36 38 40/42 44 46/48 50 HIP 83–89 89–95 95–101 101–107 107–113 113–119 119–125 INSEAM 76–78 78–80 80–82 82–84 84–85 85–86 86–87 INCHES
ALPHA XS S M L XL XXL XXXL EURO 42 44 46/48 50/52 54 56/58 60 USA-UK 32 34/36 38 40/42 44 46/48 50 HIP 32.7–35.0 35.0–37.4 37.4–39.8 39.8–42.1 42.1–44.5 44.5–46.9 46.9–49.2 INSEAM 29.9–30.7 30.7–31.5 31.5–32.3 32.3–33.1 33.1–33.5 33.5–33.9 33.9–34.3 WOMAN
CENTIMETRES
ALPHA XXS XS S M L XL HIP 82–86 86–90 90–94 94–98 98–102 102–106 INSEAM 73–75 75–76 76–78 78–79 79–80 80–81 INCHES
ALPHA XXS XS S M L XL HIP 32.3–33.9 33.9–35.4 35.4–37.0 37.0–38.6 38.6–40.2 40.2–41.7 INSEAM 28.7–29.5 29.5–29.9 29.9–30.7 30.7–31.1 31.1–31.5 31.5–31.9 -
HG MAZO WMN
kn1,189.00kn1,079.00Women’s hybrid mid-layer, offering both ventilation and wind protection depending on the area.
This is the ideal intermediate layer for training in spring and fall due to an exclusive hybrid structure that offers both protection from wind and ventilation depending on the torso area. T
he bands on the stomach and kidney areas add a special membrane to the main fabric for protection from wind downhill and the coldest weather. The back and inner arms are made of a lighter, breathable fabric, for perfect ventilation at all times when riding, even with a backpack.
The snug fit and elastic cuffs provide excellent wearability while preventing bothersome flapping at high speeds.
HG MAZO is perfect to layer over a jersey or under a waterproof shell, offering maximum comfort while riding both uphill and downhill.HOW TO MEASURE YOURSELF
CHEST
Circumference of the chest.
The circumference of the chest is the maximum measurement taken around the chest when standing upright and breathing normally. The tape measure is passed around the chest at the level of the shoulder blades, below the armpits.
WAIST
Circumference of the waist.
The circumference of the waist is measured by passing the tape measure on the waistline between the ribs and the pelvis just above the hip bones. Take the measurement when standing upright and breathing normally with the abdomen relaxed.ARM
Sleeve length.
This is the distance between the outside of the shoulder (humerus) and the wrist when the arm is relaxed.HIP
Circumference of the hips.
The circumference of the hips is measured horizontally around the part of the pelvis that protrudes most.SIZE GUIDE
MAN
CENTIMETRES
ALPHA XS S M L XL XXL XXXL EURO 42 44/46 48 50/52 54 56/58 60 USA-UK 32 34/36 38 40/42 44 46/48 50 HEIGHT 163–167.5 167.5–172 172–176 176–180 180–184 184–188 188–189 CHEST 81–87 87–93 93–99 99–105 105–111 111–117 117–123 WAIST 69–75 75–81 81–87 87–93 93–99 99–105 105–111 ARM 56–57 57–58.5 58.5–60 60–61 61–62 62–62.5 62.5–63 HIP 83–89 89–95 95–101 101–107 107–113 113–119 119–125 INCHES
ALPHA XS S M L XL XXL XXXL EURO 42 44/46 48 50/52 54 56/58 60 USA-UK 32 34/36 38 40/42 44 46/48 50 HEIGHT 64.2–65.9 65.9–67.7 67.7–69.3 69.3–70.9 70.9–72.4 72.4–74.0 74.0–74.4 CHEST 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 43.7–46.1 46.1–48.4 WAIST 27.2–29.5 29.5–31.9 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 ARM 22.0–22.4 22.4–23.0 23.0–23.6 23.6–24.0 24.0–24.4 24.4–24.6 24.6–24.8 HIP 32.7–35.0 35.0–37.4 37.4–39.8 39.8–42.1 42.1–44.5 44.5–46.9 46.9–49.2 * AWA BLACK – PONCHO: M (42 – 48), L (50 – 60)
WOMAN
CENTIMETRES
ALPHA XXS XS S M L XL US 6 8 10 12 14 16 HEIGHT 157–160 160–163 163–166 166–169 169–172 172–175 CHEST 72–76 76–80 80–84 84–88 88–92 92–96 WAIST 56–60 60–64 64–68 68–72 72–76 76–80 ARM 51–52 52–54 54–55 55–57 57–58 58–59 HIP 82–86 86–90 90–94 94–98 98–102 102–106 INCHES
ALPHA XXS XS S M L XL US 6 8 10 12 14 16 HEIGHT 61.8–63.0 63.0–64.2 64.2–65.4 65.4–66.5 66.5–67.7 67.7–68.9 CHEST 28.3–29.9 29.9–31.5 31.5–33.1 33.1–34.6 34.6–36.2 36.2–37.8 WAIST 22.0–23.6 23.6–25.2 25.2–26.8 26.8–28.3 28.3–29.9 29.9–31.5 ARM 20.1–20.5 20.5–21.3 21.3–21.7 21.7–22.4 22.4–22.8 22.8–23.2 HIP 32.3–33.9 33.9–35.4 35.4–37.0 37.0–38.6 38.6–40.2 40.2–41.7 -
TRAILKNIT PRO-ARMOR TEE
kn1,349.00kn1,219.00A functional base layer with the ability to seamlessly integrate protective elements to match rider’s unique needs.
A first for the bike industry, the Trailknit Pro Armor Tee is a functional base layer with the ability to seamlessly integrate protective elements to match your unique needs. Providing the benefits of a traditional next-to-skin base layer, including temperature regulation and muscle compression, the Trailknit Pro Armor Tee eliminates the need for multiple worn layers by incorporating protection directly into the structure. Constructed of high-performance Dryarn, it provides incredible breathability and insulation in a lightweight package. The low-profile design and ability to integrate Pro Amor padding means allday comfort and protection.
CHARACTERISTICS
- Abrasion resistant, tear resistant and anti-pilling
- Bacteriostatic, hypoallergenic and anti-odor
- Differentiated weaving with compression areas and interwoven micromesh sections for improved airflow
- Removable back protector
- Removable shoulder pads
- Seamless construction
HOMOLOGATION
CE EN 1621.1
CE EN 1621.2 Level 1
MAIN MATERIALS
Dryarn®
PERFORMANCE SHOCK
Pro Armor shoulder pads
PROTECTION
Flexagon Lite back protector
SIZE GUIDE
SAFETY GEAR
CENTIMETRES
SIZE XS S M L XL XXL CHEST 81–87 87–93 93–99 99–105 105–111 111–117 WAIST 69–75 75–81 81–87 87–93 93–99 99–105 HIP 83–89 89–95 95–101 101–107 107–113 113–119 HEIGHT 163–167.5 167.5–172 172–176 176–180 180–184 184–188 INSEAM 76–78 78–80 80–82 82–84 84–85 85–86 ARM 56–57 57–58.5 58.5–60 60–61 61–62 62–64 INCHES
SIZE XS S M L XL XXL CHEST 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 43.7–46.1 WAIST 27.2–29.5 29.5–31.9 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 HIP 32.7–35.0 35.0–37.4 37.4–39.8 39.8–42.1 42.1–44.5 44.5–46.9 HEIGHT 64.2–65.9 65.9–67.7 67.7–69.3 69.3–70.9 70.9–72.4 72.4–74.0 INSEAM 29.9–30.7 30.7–31.5 31.5–32.3 32.3–33.1 33.1–33.5 33.5–33.9 ARM 22.0–22.4 22.4–23.0 23.0–23.6 23.6–24.0 24.0–24.4 24.4–25.2 BACK PROTECTORS
(WAIST TO SHOULDER MEASUREMENT)
CENTIMETRES
SIZE XS S M L XL XXL ARMOFORM MANIS 48 48 48 52 52 52 RHYOLITE 2 47 47 47 47 51 51 RHYOLITE 2 LITE 47 47 47 47 51 51 RIVAL VEST PRO 47 47 47 47 51 51 INCHES
SIZE XS S M L XL XXL ARMOFORM MANIS 18.9 18.9 18.9 20.5 20.5 20.5 RHYOLITE 2 18.5 18.5 18.5 18.5 20.1 20.1 RHYOLITE 2 LITE 18.5 18.5 18.5 18.5 20.1 20.1 RIVAL VEST PRO 18.5 18.5 18.5 18.5 20.1 20.1 KNEE PROTECTORS
CALF (10 cm below the knee cap) – THIGH (20 cm above the knee cap)
CENTIMETRES
SIZE S M L XL CALF CIRCUMFERENCE 33 36 39 42 THIGH CIRCUMFERENCE 47 52 54 59 INCHES
SIZE S M L XL CALF CIRCUMFERENCE 13.0 14.2 15.4 16.5 THIGH CIRCUMFERENCE 18.5 20.5 21.3 23.2 ELBOW PROTECTORS
FOREARM (10 cm below the elbow) – BICEPS (15 cm above the elbow)
CENTIMETRES
SIZE S M L XL FOREARM CIRCUMFERENCE 27 28 29 31 BICEPT CIRCUMFERENCE 29 31 32 34 INCHES
SIZE S M L XL FOREARM CIRCUMFERENCE 10.6 11.0 11.4 12.2 BICEPT CIRCUMFERENCE 11.4 12.2 12.6 13.4 -
TRAILKNIT UNDER SHORTS PRO
kn559.00kn509.00Seamless shorts in Dryarn®, a special high performance fibre that is more breathable than polyester, more insulating than wool and lighter than any other fibre.
Dryarn® creates a breathing barrier which insulates the rider from outside world and carries sweat from the inside out, keeping the skin dry; warm in winter and cool in summer. The new Berenis seat pad chamois features anti-shock gel inserts that thanks the low thermal conductivity limit the overheating and also allows an optimal blood flow in the perinea muscles. It’s ipoallergenic, non-toxic and bacteriostatic.
CHARACTERISTICS
Made in Italy
GENERAL TECHNICAL FEATURES
- Berenis MTB specific seat pad
- Seamless performance enhancer construction
MATERIALS
Dryarn®
HOW TO MEASURE YOURSELF
HIP
Circumference of the hips.
The circumference of the hips is measured horizontally around the part of the pelvis that protrudes most.INSEAM
Inner Leg Measurement.
The distance between the lowest part of the trunk and the soles of the feet measured when standing upright with the feet slightly apart and the weight of the body evenly distributed on both legs.SIZE GUIDE
MAN
CENTIMETRES
ALPHA XS S M L XL XXL XXXL EURO 42 44 46/48 50/52 54 56/58 60 USA-UK 32 34/36 38 40/42 44 46/48 50 HIP 83–89 89–95 95–101 101–107 107–113 113–119 119–125 INSEAM 76–78 78–80 80–82 82–84 84–85 85–86 86–87 INCHES
ALPHA XS S M L XL XXL XXXL EURO 42 44 46/48 50/52 54 56/58 60 USA-UK 32 34/36 38 40/42 44 46/48 50 HIP 32.7–35.0 35.0–37.4 37.4–39.8 39.8–42.1 42.1–44.5 44.5–46.9 46.9–49.2 INSEAM 29.9–30.7 30.7–31.5 31.5–32.3 32.3–33.1 33.1–33.5 33.5–33.9 33.9–34.3 WOMAN
CENTIMETRES
ALPHA XXS XS S M L XL HIP 82–86 86–90 90–94 94–98 98–102 102–106 INSEAM 73–75 75–76 76–78 78–79 79–80 80–81 INCHES
ALPHA XXS XS S M L XL HIP 32.3–33.9 33.9–35.4 35.4–37.0 37.0–38.6 38.6–40.2 40.2–41.7 INSEAM 28.7–29.5 29.5–29.9 29.9–30.7 30.7–31.1 31.1–31.5 31.5–31.9 -
AWA BLACK – SHIRT
kn799.00kn719.00The perfect garment for everyday urban commuting.
Designed to be cool, fresh and dry on and off the saddle, the AWA BLACK SHIRT provides the user with a modern look lightweight fabric.
GENERAL TECHNICAL FEATURES
- Automatic buttons
- Hi-Vis mapped zones
HOW TO MEASURE YOURSELF
CHEST
Circumference of the chest.
The circumference of the chest is the maximum measurement taken around the chest when standing upright and breathing normally. The tape measure is passed around the chest at the level of the shoulder blades, below the armpits.WAIST
Circumference of the waist.
The circumference of the waist is measured by passing the tape measure on the waistline between the ribs and the pelvis just above the hip bones. Take the measurement when standing upright and breathing normally with the abdomen relaxed.ARM
Sleeve length.
This is the distance between the outside of the shoulder (humerus) and the wrist when the arm is relaxed.HIP
Circumference of the hips.
The circumference of the hips is measured horizontally around the part of the pelvis that protrudes most.MAN
CENTIMETRES
ALPHA XS S M L XL XXL XXXL EURO 42 44/46 48 50/52 54 56/58 60 USA-UK 32 34/36 38 40/42 44 46/48 50 HEIGHT 163–167.5 167.5–172 172–176 176–180 180–184 184–188 188–189 CHEST 81–87 87–93 93–99 99–105 105–111 111–117 117–123 WAIST 69–75 75–81 81–87 87–93 93–99 99–105 105–111 ARM 56–57 57–58.5 58.5–60 60–61 61–62 62–62.5 62.5–63 HIP 83–89 89–95 95–101 101–107 107–113 113–119 119–125 INCHES
ALPHA XS S M L XL XXL XXXL EURO 42 44/46 48 50/52 54 56/58 60 USA-UK 32 34/36 38 40/42 44 46/48 50 HEIGHT 64.2–65.9 65.9–67.7 67.7–69.3 69.3–70.9 70.9–72.4 72.4–74.0 74.0–74.4 CHEST 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 43.7–46.1 46.1–48.4 WAIST 27.2–29.5 29.5–31.9 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 ARM 22.0–22.4 22.4–23.0 23.0–23.6 23.6–24.0 24.0–24.4 24.4–24.6 24.6–24.8 HIP 32.7–35.0 35.0–37.4 37.4–39.8 39.8–42.1 42.1–44.5 44.5–46.9 46.9–49.2 * AWA BLACK – PONCHO: M (42 – 48), L (50 – 60)
WOMAN
CENTIMETRES
ALPHA XXS XS S M L XL US 6 8 10 12 14 16 HEIGHT 157–160 160–163 163–166 166–169 169–172 172–175 CHEST 72–76 76–80 80–84 84–88 88–92 92–96 WAIST 56–60 60–64 64–68 68–72 72–76 76–80 ARM 51–52 52–54 54–55 55–57 57–58 58–59 HIP 82–86 86–90 90–94 94–98 98–102 102–106 INCHES
ALPHA XXS XS S M L XL US 6 8 10 12 14 16 HEIGHT 61.8–63.0 63.0–64.2 64.2–65.4 65.4–66.5 66.5–67.7 67.7–68.9 CHEST 28.3–29.9 29.9–31.5 31.5–33.1 33.1–34.6 34.6–36.2 36.2–37.8 WAIST 22.0–23.6 23.6–25.2 25.2–26.8 26.8–28.3 28.3–29.9 29.9–31.5 ARM 20.1–20.5 20.5–21.3 21.3–21.7 21.7–22.4 22.4–22.8 22.8–23.2 HIP 32.3–33.9 33.9–35.4 35.4–37.0 37.0–38.6 38.6–40.2 40.2–41.7 -
RHYOLITE 2 SAFETY JACKET
kn2,219.00kn1,999.00The most advanced upper body armour for gravity use. It provides protection from back to the chest with superior breathability and comfort.
The result from extensive research into the movement of the human body, the Rhyolite 2 Safety Jacket is Dainese’s most ergonomic and advanced design to date and the pinnacle of upper body armor available today. Advancing Dainese’s use of functional patterns inspired by nature, this jacket features Flexagon protection coverage from the back to the chest, resulting in superior breathability, comfort and protection. With removable sleeves utilizing Dainese’s Pro Armor elbow and shoulder pads, the Rhyolite 2 is an adaptable to address each rider’s needs.
CHARACTERISTICS
Removable sleeves
HOMOLOGATION
CE EN 1621.1
CE EN 1621.2 Level 2
MAIN MATERIALS
Crash Absorb soft memory foam
MATERIALS
- Jersey hole Highly Breathable
- Run-Resistant mesh
PERFORMANCE SHOCK
- Crash Absorb chest and rib pads
- Flexagon Technology back protector
- Pro Armor elbow pads
- Pro Armor shoulder pads
SIZE GUIDE
SAFETY GEAR
CENTIMETRES
SIZE XS S M L XL XXL CHEST 81–87 87–93 93–99 99–105 105–111 111–117 WAIST 69–75 75–81 81–87 87–93 93–99 99–105 HIP 83–89 89–95 95–101 101–107 107–113 113–119 HEIGHT 163–167.5 167.5–172 172–176 176–180 180–184 184–188 INSEAM 76–78 78–80 80–82 82–84 84–85 85–86 ARM 56–57 57–58.5 58.5–60 60–61 61–62 62–64 INCHES
SIZE XS S M L XL XXL CHEST 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 43.7–46.1 WAIST 27.2–29.5 29.5–31.9 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 HIP 32.7–35.0 35.0–37.4 37.4–39.8 39.8–42.1 42.1–44.5 44.5–46.9 HEIGHT 64.2–65.9 65.9–67.7 67.7–69.3 69.3–70.9 70.9–72.4 72.4–74.0 INSEAM 29.9–30.7 30.7–31.5 31.5–32.3 32.3–33.1 33.1–33.5 33.5–33.9 ARM 22.0–22.4 22.4–23.0 23.0–23.6 23.6–24.0 24.0–24.4 24.4–25.2 BACK PROTECTORS
(WAIST TO SHOULDER MEASUREMENT)
CENTIMETRES
SIZE XS S M L XL XXL ARMOFORM MANIS 48 48 48 52 52 52 RHYOLITE 2 47 47 47 47 51 51 RHYOLITE 2 LITE 47 47 47 47 51 51 RIVAL VEST PRO 47 47 47 47 51 51 INCHES
SIZE XS S M L XL XXL ARMOFORM MANIS 18.9 18.9 18.9 20.5 20.5 20.5 RHYOLITE 2 18.5 18.5 18.5 18.5 20.1 20.1 RHYOLITE 2 LITE 18.5 18.5 18.5 18.5 20.1 20.1 RIVAL VEST PRO 18.5 18.5 18.5 18.5 20.1 20.1 KNEE PROTECTORS
CALF (10 cm below the knee cap) – THIGH (20 cm above the knee cap)
CENTIMETRES
SIZE S M L XL CALF CIRCUMFERENCE 33 36 39 42 THIGH CIRCUMFERENCE 47 52 54 59 INCHES
SIZE S M L XL CALF CIRCUMFERENCE 13.0 14.2 15.4 16.5 THIGH CIRCUMFERENCE 18.5 20.5 21.3 23.2 ELBOW PROTECTORS
FOREARM (10 cm below the elbow) – BICEPS (15 cm above the elbow)
CENTIMETRES
SIZE S M L XL FOREARM CIRCUMFERENCE 27 28 29 31 BICEPT CIRCUMFERENCE 29 31 32 34 INCHES
SIZE S M L XL FOREARM CIRCUMFERENCE 10.6 11.0 11.4 12.2 BICEPT CIRCUMFERENCE 11.4 12.2 12.6 13.4 -
TRAIL SKINS PRO ELBOW GUARDS
kn599.00kn539.00Bike elbow protectors with ultra-ventilated structure, made from PRO SHAPE 2.0 for maximum freedom of movement.
The latest evolution in trail protection raises the bar yet again.
Developed on World Cup trails, Trail Skins Pro combines excellent adaptability to the form of the elbow, constant ventilation, and maximum protection due to the carbon-elastomer compound and ergonomic shape of the PRO SHAPE 2.0 protector that allows great freedom of movement and evenly distributes the force of any impact to the sides. The smooth surface on the side padding bolsters limits friction and facilitates sliding in the event of a fall.
Created by mapping the shape of the arm, the special sleeve is highly breathable and stays in place on the elbow during strenuous activity with no need for adjustments or position changes while riding.
It fits like a second skin allowing you to reach your maximum potential while enjoying complete protection.GENERAL TECHNICAL FEATURES
- Forearm elastic band
- Bicep and forearm straps
- Extra wide elastic bands with silicone grippers
- Slip-on design
HOMOLOGATION
CE EN 1621.1
MATERIALS
- Jersey hole Highly Breathable
- Run-Resistant mesh
PROTECTION
- Pro-Shape 2.0 pads
- Side protection bolsters
SIZE GUIDE
SAFETY GEAR
CENTIMETRES
SIZE XS S M L XL XXL CHEST 81–87 87–93 93–99 99–105 105–111 111–117 WAIST 69–75 75–81 81–87 87–93 93–99 99–105 HIP 83–89 89–95 95–101 101–107 107–113 113–119 HEIGHT 163–167.5 167.5–172 172–176 176–180 180–184 184–188 INSEAM 76–78 78–80 80–82 82–84 84–85 85–86 ARM 56–57 57–58.5 58.5–60 60–61 61–62 62–64 INCHES
SIZE XS S M L XL XXL CHEST 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 43.7–46.1 WAIST 27.2–29.5 29.5–31.9 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 HIP 32.7–35.0 35.0–37.4 37.4–39.8 39.8–42.1 42.1–44.5 44.5–46.9 HEIGHT 64.2–65.9 65.9–67.7 67.7–69.3 69.3–70.9 70.9–72.4 72.4–74.0 INSEAM 29.9–30.7 30.7–31.5 31.5–32.3 32.3–33.1 33.1–33.5 33.5–33.9 ARM 22.0–22.4 22.4–23.0 23.0–23.6 23.6–24.0 24.0–24.4 24.4–25.2 BACK PROTECTORS
(WAIST TO SHOULDER MEASUREMENT)
CENTIMETRES
SIZE XS S M L XL XXL ARMOFORM MANIS 48 48 48 52 52 52 RHYOLITE 2 47 47 47 47 51 51 RHYOLITE 2 LITE 47 47 47 47 51 51 RIVAL VEST PRO 47 47 47 47 51 51 INCHES
SIZE XS S M L XL XXL ARMOFORM MANIS 18.9 18.9 18.9 20.5 20.5 20.5 RHYOLITE 2 18.5 18.5 18.5 18.5 20.1 20.1 RHYOLITE 2 LITE 18.5 18.5 18.5 18.5 20.1 20.1 RIVAL VEST PRO 18.5 18.5 18.5 18.5 20.1 20.1 KNEE PROTECTORS
CALF (10 cm below the knee cap) – THIGH (20 cm above the knee cap)
CENTIMETRES
SIZE S M L XL CALF CIRCUMFERENCE 33 36 39 42 THIGH CIRCUMFERENCE 47 52 54 59 INCHES
SIZE S M L XL CALF CIRCUMFERENCE 13.0 14.2 15.4 16.5 THIGH CIRCUMFERENCE 18.5 20.5 21.3 23.2 ELBOW PROTECTORS
FOREARM (10 cm below the elbow) – BICEPS (15 cm above the elbow)
CENTIMETRES
SIZE S M L XL FOREARM CIRCUMFERENCE 27 28 29 31 BICEPT CIRCUMFERENCE 29 31 32 34 INCHES
SIZE S M L XL FOREARM CIRCUMFERENCE 10.6 11.0 11.4 12.2 BICEPT CIRCUMFERENCE 11.4 12.2 12.6 13.4 -
ARMOFORM PRO KNEE GUARDS
kn799.00kn719.00Rigid bike knee protectors with sliding polyethylene plates for maximum safety on downhill slopes.
These knee guards offer maximum protection without sacrificing freedom of movement or comfort, so you can face the most challenging Downhill descents with no hesitation.
Taking inspiration from natural fractals, the design of the two sliding polyethylene plates distribute the force of impact over a broad area, for minimum shock to the knee. Surface vents provide constant ventilation, making these guards ideal for wear even with long pants. Side padding bolsters protect the knee from bumps with the frame while the smooth surface creates minimal friction allowing the plates to slide easily in the event of a crash.
The LYCRA® Jersey Hole sock, with its highly breathable open-back design, offers infinite adjustment possibilities for perfect adaption to all bodies through its comfortable Velcro straps and elastic grippers that protect the calf with no need for adjustment throughout the day.GENERAL TECHNICAL FEATURES
Extra wide elastic bands with silicone grippers
HOMOLOGATION
CE EN 1621.1
MATERIALS
- Crash Absorb soft memory foam
- Jersey hole Highly Breathable
- Run-Resistant mesh
PERFORMANCE SHOCK
Calf power strap
PROTECTION
- Crash Absorb Side pads
- Sliding Polyethylene knee/shin plates
SIZE GUIDE
SAFETY GEAR
CENTIMETRES
SIZE XS S M L XL XXL CHEST 81–87 87–93 93–99 99–105 105–111 111–117 WAIST 69–75 75–81 81–87 87–93 93–99 99–105 HIP 83–89 89–95 95–101 101–107 107–113 113–119 HEIGHT 163–167.5 167.5–172 172–176 176–180 180–184 184–188 INSEAM 76–78 78–80 80–82 82–84 84–85 85–86 ARM 56–57 57–58.5 58.5–60 60–61 61–62 62–64 INCHES
SIZE XS S M L XL XXL CHEST 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 43.7–46.1 WAIST 27.2–29.5 29.5–31.9 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 HIP 32.7–35.0 35.0–37.4 37.4–39.8 39.8–42.1 42.1–44.5 44.5–46.9 HEIGHT 64.2–65.9 65.9–67.7 67.7–69.3 69.3–70.9 70.9–72.4 72.4–74.0 INSEAM 29.9–30.7 30.7–31.5 31.5–32.3 32.3–33.1 33.1–33.5 33.5–33.9 ARM 22.0–22.4 22.4–23.0 23.0–23.6 23.6–24.0 24.0–24.4 24.4–25.2 BACK PROTECTORS
(WAIST TO SHOULDER MEASUREMENT)
CENTIMETRES
SIZE XS S M L XL XXL ARMOFORM MANIS 48 48 48 52 52 52 RHYOLITE 2 47 47 47 47 51 51 RHYOLITE 2 LITE 47 47 47 47 51 51 RIVAL VEST PRO 47 47 47 47 51 51 INCHES
SIZE XS S M L XL XXL ARMOFORM MANIS 18.9 18.9 18.9 20.5 20.5 20.5 RHYOLITE 2 18.5 18.5 18.5 18.5 20.1 20.1 RHYOLITE 2 LITE 18.5 18.5 18.5 18.5 20.1 20.1 RIVAL VEST PRO 18.5 18.5 18.5 18.5 20.1 20.1 KNEE PROTECTORS
CALF (10 cm below the knee cap) – THIGH (20 cm above the knee cap)
CENTIMETRES
SIZE S M L XL CALF CIRCUMFERENCE 33 36 39 42 THIGH CIRCUMFERENCE 47 52 54 59 INCHES
SIZE S M L XL CALF CIRCUMFERENCE 13.0 14.2 15.4 16.5 THIGH CIRCUMFERENCE 18.5 20.5 21.3 23.2 ELBOW PROTECTORS
FOREARM (10 cm below the elbow) – BICEPS (15 cm above the elbow)
CENTIMETRES
SIZE S M L XL FOREARM CIRCUMFERENCE 27 28 29 31 BICEPT CIRCUMFERENCE 29 31 32 34 INCHES
SIZE S M L XL FOREARM CIRCUMFERENCE 10.6 11.0 11.4 12.2 BICEPT CIRCUMFERENCE 11.4 12.2 12.6 13.4 -
HG KAINDY SS
kn519.00kn469.00Short-sleeved jersey with cool, lightweight construction: perform to your best even on the hottest of days.
Jerseys in the Dainese HG line are designed and developed to offer every rider the possibility to express their full potential and keep pushing beyond their limits.The HG KAINDY is designed to feel fresh and pass unnoticed on the skin, making it an ideal layer for the hottest summer days when breathability and ventilation really make a difference, giving you the comfort and confidence you need to achieve your best performance.
GENERAL TECHNICAL FEATURES
- Crew neck
- Short sleeves
- Standard Fit
MATERIALS
85% Polyester
15% Elastane (Chest)
HOW TO MEASURE YOURSELF
CHEST
Circumference of the chest.
The circumference of the chest is the maximum measurement taken around the chest when standing upright and breathing normally. The tape measure is passed around the chest at the level of the shoulder blades, below the armpits.WAIST
Circumference of the waist.
The circumference of the waist is measured by passing the tape measure on the waistline between the ribs and the pelvis just above the hip bones. Take the measurement when standing upright and breathing normally with the abdomen relaxed.ARM
Sleeve length.
This is the distance between the outside of the shoulder (humerus) and the wrist when the arm is relaxed.HIP
Circumference of the hips.
The circumference of the hips is measured horizontally around the part of the pelvis that protrudes most.MAN
CENTIMETRES
ALPHA XS S M L XL XXL XXXL EURO 42 44/46 48 50/52 54 56/58 60 USA-UK 32 34/36 38 40/42 44 46/48 50 HEIGHT 163–167.5 167.5–172 172–176 176–180 180–184 184–188 188–189 CHEST 81–87 87–93 93–99 99–105 105–111 111–117 117–123 WAIST 69–75 75–81 81–87 87–93 93–99 99–105 105–111 ARM 56–57 57–58.5 58.5–60 60–61 61–62 62–62.5 62.5–63 HIP 83–89 89–95 95–101 101–107 107–113 113–119 119–125 INCHES
ALPHA XS S M L XL XXL XXXL EURO 42 44/46 48 50/52 54 56/58 60 USA-UK 32 34/36 38 40/42 44 46/48 50 HEIGHT 64.2–65.9 65.9–67.7 67.7–69.3 69.3–70.9 70.9–72.4 72.4–74.0 74.0–74.4 CHEST 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 43.7–46.1 46.1–48.4 WAIST 27.2–29.5 29.5–31.9 31.9–34.3 34.3–36.6 36.6–39.0 39.0–41.3 41.3–43.7 ARM 22.0–22.4 22.4–23.0 23.0–23.6 23.6–24.0 24.0–24.4 24.4–24.6 24.6–24.8 HIP 32.7–35.0 35.0–37.4 37.4–39.8 39.8–42.1 42.1–44.5 44.5–46.9 46.9–49.2 * AWA BLACK – PONCHO: M (42 – 48), L (50 – 60)
WOMAN
CENTIMETRES
ALPHA XXS XS S M L XL US 6 8 10 12 14 16 HEIGHT 157–160 160–163 163–166 166–169 169–172 172–175 CHEST 72–76 76–80 80–84 84–88 88–92 92–96 WAIST 56–60 60–64 64–68 68–72 72–76 76–80 ARM 51–52 52–54 54–55 55–57 57–58 58–59 HIP 82–86 86–90 90–94 94–98 98–102 102–106 INCHES
ALPHA XXS XS S M L XL US 6 8 10 12 14 16 HEIGHT 61.8–63.0 63.0–64.2 64.2–65.4 65.4–66.5 66.5–67.7 67.7–68.9 CHEST 28.3–29.9 29.9–31.5 31.5–33.1 33.1–34.6 34.6–36.2 36.2–37.8 WAIST 22.0–23.6 23.6–25.2 25.2–26.8 26.8–28.3 28.3–29.9 29.9–31.5 ARM 20.1–20.5 20.5–21.3 21.3–21.7 21.7–22.4 22.4–22.8 22.8–23.2 HIP 32.3–33.9 33.9–35.4 35.4–37.0 37.0–38.6 38.6–40.2 40.2–41.7 -
INTENSE 2020 M29 FACTORY FRAME AND SHOCK
THE M29 IS THE PINNACLE OF DOWNHILL PERFORMANCE. WITH OVER 25-YEARS OF DEVELOPMENT, THE M29 IS THE NEWEST ADDITION TO THE M-SERIES. DESIGNED FROM THE GROUND-UP, DEVELOPED ON THE WORLD CUP CIRCUIT AND PROVEN ON THE PODIUM, THE 29″ WHEELED M29 IS IN A CLASS OF ITS OWN.
With over 25 years of downhill racing knowledge, the M-series’ legendary legacy continues, although the M29 is not ‘just’ a bigger brother of the M16. With specifically designed kinematics and geometry to compliment the 29-inch wheels, the M29 is a fast, fierce and fun downhill bike as competed by our athletes Aaron Gwin, Neko Mulally and Jack Moir.
With special features and some of the finest DH components on the market such as an optimized carbon layup, high quality wheels, internal cable routing as well as the distinguished M29 frame that was developed with the INTENSE Factory Racing team, the M29 is as striking as it is nimble when it comes to the challenges of downhill. It was prototyped in racing, in fact one of the original M29 alloy mules finished on the podium with Jack Moir at Fort William in 2017 – an emphatic moment, and absolute confirmation of the potential that would be unlocked for everyone to enjoy once the M29 project reached production status.
FRAME AND SHOCK SPECIFICATIONS
- FRAME M29 Monocoque Carbon Frame
- Optimized Layup Carbon fiber
- Carbon top link
- Titanium hardware
- Internal shift and brake routing
- ISCG05 mounts
- Flak guard armor
FORK
N/A
SHOCK
Fox Factory Float X2 / 250MM x 70MM
-
INTENSE 2020 M29 ELITE
THE M29 IS THE PINNACLE OF DOWNHILL PERFORMANCE. WITH OVER 25-YEARS OF DEVELOPMENT, THE M29 IS THE NEWEST ADDITION TO THE M-SERIES. DESIGNED FROM THE GROUND-UP, DEVELOPED ON THE WORLD CUP CIRCUIT AND PROVEN ON THE PODIUM, THE 29″ WHEELED M29 IS IN A CLASS OF ITS OWN.
WITH OVER 25 YEARS OF DOWNHILL RACING KNOWLEDGE, THE M-SERIES’ LEGENDARY LEGACY CONTINUES, ALTHOUGH THE M29 IS NOT ‘JUST’ A BIGGER BROTHER OF THE M16. WITH SPECIFICALLY DESIGNED KINEMATICS AND GEOMETRY TO COMPLIMENT THE 29-INCH WHEELS, THE M29 IS A FAST, FIERCE AND FUN DOWNHILL BIKE AS COMPETED BY OUR ATHLETES AARON GWIN, NEKO MULALLY AND JACK MOIR.
With special features and some of the finest DH components on the market such as an optimized carbon layup, high quality wheels, internal cable routing as well as the distinguished M29 frame that was developed with the INTENSE Factory Racing team, the M29 is as striking as it is nimble when it comes to the challenges of downhill. It was prototyped in racing, in fact one of the original M29 alloy mules finished on the podium with Jack Moir at Fort William in 2017 – an emphatic moment, and absolute confirmation of the potential that would be unlocked for everyone to enjoy once the M29 project reached production status.
ELITE BUILD SPECIFICATIONS
FRAME
- M29 Monocoque Carbon Frame
- Optimized Layup Carbon fiber
- Carbon top link, Titanium hardware, Internal shift and brake routing
- ISCG05 mounts, Flak guard armor
- 208MM (8.2”) travel
FORK
Fox Factory Float 49 / 200MM / Boost
SHOCK
Fox Factory Float X2 / 250MM x 70MM
WHEELSET
WHEELS 29″ E13 LG1 DH Race Carbon 31MM / Boost HUBS LG1 Race SL hubs 32 Hole 20×110 front, 12×157 rear hub 6-bolt, XD RIMS 29″ E13 LG1 DH Race Carbon 30MM / Boost SPOKES E13 TIRES Front: Maxxis Minion DHF 29 x 2.50” // Rear: Maxxis Minion DHR II 29 x 2.40” DRIVETRAIN
SHIFTERS Sram GX 7-speed Trigger REAR DERAILLEUR Sram X01 DH, 7 speed FRONT DERAILLEUR N/A CRANK E13 LG1 Race Carbon / 36t / 165MM / Boost CASSETTE E13 7sp DM / 9-21t CHAIN Sram PC 1110 7/11sp CHAIN GUIDE E13 LG1+ BOTTOM BRACKET E13 83MM BSA (Threaded) COMPONENTS
SADDLE Fabric Scoop Radius Elite SEATPOST Intense Alloy 31.6mm HANDLEBAR Renthal Fatbar 800x20mm STEM Renthal Integra Direct Mount 31.8mm Clamp. 45mm HEADSET Cane Creek 40 Series, ZS49/ZS56.30 BRAKESET Shimano Saint M820 Front / Shimano Saint M820 Rear Shimano XT RT76 203MM Front / Shimano XT RT76 203MM Rear GRIPS Intense *Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
-
INTENSE 2020 M16 FACTORY FRAME AND SHOCK
THE M16 IS A WORLD-CUP PROVEN DOWNHILL RACING MACHINE. IT IS THE CULMINATION OF DECADES OF R&D THAT BEGAN WITH IT’S FAMOUS PREDECESSOR, THE M1, AND HAS EVOLVED THROUGHOUT THE GENERATIONS OF M.
The M16 was introduced in 2016 and it was the first full-carbon downhill bike introduced INTENSE. With 27.5” wheels, the M16 remains an important race-ready model in the INTENSE line-up for those looking for a quality downhill bike with premium components and featuring the smaller wheel size.
Since the initial M16 model was released, the INTENSE Factory Racing team and INTENSE engineers have worked closely together to retune the kinematics of the bike for improved agility and handling over a variety of terrain. The fixed geometry of the bike compliments the bike’s new metric shock, which is longer than the predecessor for better overall stability and feeling, especially in race conditions. The geometry has been further improved and the bike has a slacker head angle, with a lower BB than the previous model. The M16 now boasts an ‘FRO’ (For Racing Only) bottom link, which works in harmony with the revised kinematics, geometry and metric shock on the bike, offering a premium riding experience thanks to INTENSE’s high-quality engineering. We put a lot of thought into the process of improving this already-impressive downhill model, and thanks to our accessibility to the toughest arenas in the world with some of the leading athletes on the planet, the M16 is a more complete and an even more race defined package for those looking for a 27.5” downhill bike. For 2020 the bike has a new striking look in the high-quality finish expected from INTENSE.All bikes come pre-built and tuned through INTENSE authorized mechanics and will arrive to you with minimum assembly.
M16: FEATURES AND BENEFITS VIDEO
FRAME AND SHOCK BUILD SPECIFICATIONS
FRAME
- M16 Monocoque Carbon Frame
- Optimized Layup Carbon fiber
- Carbon top link
- Titanium hardware
- Internal shift and brake routing
- ISCG05 mounts
- Flak guard armor
FORK
N/ASHOCK
Fox FACTORY Float X2 / 250MM x 75MM*Parts/Spec are subject to change without notice.Included with each complete bike is an INTENSE branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
GEOMETRY (MM / INCH)
SIZE Small Medium Large XL A: SEAT TUBE LENGTH 389 mm/15.3″
414 mm/ 16.3″
431 mm/ 17″
431 mm/ 17″
B: TOP TUBE 567 mm/ 22.34″
592 mm/ 23.32″
618 mm/ 24.34″
635 mm/ 25″
C: STACK 590 mm/ 23.2″
594.6 mm / 23.4″
600.9 mm/ 23.7″
608 mm/ 23.9″
D: REACH 385.7 mm/ 15.2″
409.6 mm/ 16.1″
432.6 mm/ 17.0″
450 mm/ 17.7″
E: BB HEIGHT 362.4 mm/ 14.27″
362.4 mm/ 14.27″
362.4 mm/ 14.27″
362.4 mm/ 14.27″
F: BB DROP Rise 8.07 mm / 0.32″ Rise 8.07 mm / 0.32″ Rise 8.07 mm / 0.32″ Rise 8.07 mm / 0.32″ G: HEAD TUBE LENGTH 110 mm/ 4.3″
115 mm/ 4.5″
122 mm/ 4.8”
132 mm/ 5.2”
H: HEAD TUBE ANGLE 63.1 ̊
63.1 ̊
63.1 ̊
63.1 ̊
I: SEAT TUBE ANGLE 72.9 ̊
72.9 ̊
72.9 ̊
72.9 ̊
J: STANDOVER HEIGHT 797 mm/ 31.4”
806.9 mm/ 31.77″
809 mm/ 31.9”
813 mm/ 32″
K: CHAINSTAY LENGTH 447.6 mm/ 17.62″
447.6 mm/ 17.62″
447.6 mm/ 17.62″
447.6 mm/ 17.62″
L: WHEELBASE 1190.5 mm/ 46.9″
1216.5 mm/ 47.9″
1242.7 mm/ 48.9″
1271 mm/ 50″
-
INTENSE 2020 M16 EXPERT BUILD
THE M16 IS A WORLD-CUP PROVEN DOWNHILL RACING MACHINE. IT IS THE CULMINATION OF DECADES OF R&D THAT BEGAN WITH IT’S FAMOUS PREDECESSOR, THE M1, AND HAS EVOLVED THROUGHOUT THE GENERATIONS OF M.
The M16 was introduced in 2016 and it was the first full-carbon downhill bike introduced INTENSE. With 27.5” wheels, the M16 remains an important race-ready model in the INTENSE line-up for those looking for a quality downhill bike with premium components and featuring the smaller wheel size.
Since the initial M16 model was released, the INTENSE Factory Racing team and INTENSE engineers have worked closely together to retune the kinematics of the bike for improved agility and handling over a variety of terrain. The fixed geometry of the bike compliments the bike’s new metric shock, which is longer than the predecessor for better overall stability and feeling, especially in race conditions. The geometry has been further improved and the bike has a slightly slacker head angle, with a lower BB than the previous model. The M16 now boasts an ‘FRO’ (For Racing Only) bottom link, which works in harmony with the revised kinematics, geometry and metric shock on the bike, offering a premium riding experience thanks to INTENSE’s high-quality engineering. We put a lot of thought into the process of improving this already-impressive downhill model, and thanks to our accessibility to the toughest arenas in the world with some of the leading athletes on the planet, the M16 is a more complete and an even more race defined package for those looking for a 27.5” downhill bike. For 2020 the bike has a new striking look in the high-quality finish expected from INTENSE.
All bikes come pre-built and tuned through INTENSE authorized mechanics and will arrive to you with minimum assembly.
M16: FEATURES AND BENEFITS VIDEO
EXPERT BUILD SPECIFICATIONS
FRAME
- M16 Monocoque Carbon Frame
- Optimized Layup Carbon fiber
- Carbon top link, Titanium hardware, Internal shift and brake routing
- ISCG05 mounts
- Flak guard armor
Travel: 210mm
FORK
Fox Performance Elite Float 40 / 200MM
SHOCK
Fox Performance Float X2 / 250MM x 75MM
WHEELSETWHEELS E13 LG1 DH 30MM HUBS E13 TRS Race SL 27.5, 110×20 mm front HUB; 157 x 12 mm rear w/XD Driver, 20 mm front RIMS E13 LG1 DH 30MM SPOKES E13 TIRES Front: Maxxis Minion DHF 27.5 x 2.50 // Rear: Maxxis Minion DHR II 27.5 x 2.40” DRIVETRAINSHIFTERS Sram GX 7 speed REAR DERAILLEUR Sram GX DH 7 speed FRONT DERAILLEUR N/A CRANK E13 LG1 Alloy DH / 36t / 165MM / Boost CASSETTE E13 7 speed DM / 9-21t CHAIN Sram PC 1110 7/11speed CHAIN GUIDE E13 LG1+ BOTTOM BRACKET E13 83MM BSA (Threaded) COMPONENTSSADDLE WTB Volt Sport SEATPOST Intense Alloy 31.6MM HANDLEBAR Intense Recon Alloy DH 800MM STEM Renthal Integra DH 45MM HEADSET Cane Creek, 40, alloy cartridge, 25 mm of spacers BRAKESET Shimano Zee M640 Front / Shimano Zee M640 Rear // Rotors Shimano XT RT76 203MM Front / Shimano XT RT76 203MM Rear GRIPS Intense Lock-on *Parts/Spec are subject to change without notice.
Included with each complete bike is an INTENSE branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH)
SIZE Small Medium Large XL A: SEAT TUBE LENGTH 389 mm/15.3″
414 mm/ 16.3″
431 mm/ 17″
431 mm/ 17″
B: TOP TUBE 567 mm/ 22.34″
592 mm/ 23.32″
618 mm/ 24.34″
635 mm/ 25″
C: STACK 590 mm/ 23.2″
594.6 mm / 23.4″
600.9 mm/ 23.7″
608 mm/ 23.9″
D: REACH 385.7 mm/ 15.2″
409.6 mm/ 16.1″
432.6 mm/ 17.0″
450 mm/ 17.7″
E: BB HEIGHT 362.4 mm/ 14.27″
362.4 mm/ 14.27″
362.4 mm/ 14.27″
362.4 mm/ 14.27″
F: BB DROP Rise 8.07 mm / 0.32″ Rise 8.07 mm / 0.32″ Rise 8.07 mm / 0.32″ Rise 8.07 mm / 0.32″ G: HEAD TUBE LENGTH 110 mm/ 4.3″
115 mm/ 4.5″
122 mm/ 4.8”
132 mm/ 5.2”
H: HEAD TUBE ANGLE 63.1 ̊
63.1 ̊
63.1 ̊
63.1 ̊
I: SEAT TUBE ANGLE 72.9 ̊
72.9 ̊
72.9 ̊
72.9 ̊
J: STANDOVER HEIGHT 797 mm/ 31.4”
806.9 mm/ 31.77″
809 mm/ 31.9”
813 mm/ 32″
K: CHAINSTAY LENGTH 447.6 mm/ 17.62″
447.6 mm/ 17.62″
447.6 mm/ 17.62″
447.6 mm/ 17.62″
L: WHEELBASE 1190.5 mm/ 46.9″
1216.5 mm/ 47.9″
1242.7 mm/ 48.9″
1271 mm/ 50″
-
INTENSE 2020 CARBINE FACTORY FRAME AND SHOCK
ROLL OVER THE TOUGHEST TERRAIN WITH SPEED AND CONFIDENCE. WITH JS ENDURO LINK SUSPENSION, 155MM OF TRAVEL, AND 29″ WHEELS, THE CARBINE IS READY TO CONQUER THE TRAIL OR MOUNTAIN BIKE PARK.
The Carbine Factory frameset comes with an optimized UD Carbon fiber front and rear triangle, a carbon top link and steel hardware.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 160mm/155mm WHEEL SIZE: 29″ INCLUDES: Frame, upper & lower links, hardware and shock FRAME WEIGHT: 2,7 Kg. w/out shock HT ANGLE: 65.5 ̊ REACH: 410mm/16.1″ (Small) // 431mm/17.0″ (Medium) // 455mm/17.9″ (Large) // 471mm/18.5″ (XL) FRAME AND SHOCK SPECIFICATIONS
FRAME
- Carbine 29” Enduro Optimized Carbon Frame
- Carbon top link, internal shift, dropper post and brake routing
- ISCG05 mounts, flack guard armour, 155mm travel
SHOCK
- Fox Factory Float X2
- 230x60mm (155mm travel)
- 2-position (open/firm)
*Parts/Spec are subject to change without notice.
FIND YOUR SIZING
GEOMETRY (MM / INCH)
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 385
15.2418
16.5448
17.6483
19.0B: EFFECTIVE TOP TUBE 603
23.7627
24.7655
25.8675
26.6C: STACK 616
24.3624
24.6632
24.9641
25.2D: REACH 410
16.1431
17.0455
17.9471
18.5E: BB HEIGHT 348
13.7348
13.7348
13.7348
13.7F: BB DROP 0.0 0.0 0.0 0.0 G: HEAD TUBE LENGTH 92
3.6100
3.9110
4.3120
4.7H: HEAD TUBE ANGLE 65.5 ° 65.5 ° 65.5 ° 65.5 ° I: SEAT TUBE ANGLE 74.0 ° 74.0 ° 74.0 ° 74.0 ° J: STANDOVER HEIGHT 830
32.7834
32.8834
32.8836
32.9K: CHAINSTAY LENGTH 445
17.5445
17.5445
17.5445
17.5L: WHEELBASE 1181
46.51205
47.41233
48.51253
49.3SUGGESTED RIDER HEIGHT 5’0″-5’6″ 5’5″-5’10” 5’9″-6’1″ 5’11”-6’6″ -
INTENSE 2020 CARBINE EXPERT BUILD
ROLL OVER THE TOUGHEST TERRAIN WITH SPEED AND CONFIDENCE. WITH JS ENDURO LINK SUSPENSION, 155MM OF TRAVEL, AND 29″ WHEELS, THE CARBINE IS READY TO CONQUER THE TRAIL OR MOUNTAIN BIKE PARK.
The Carbine Pro Build, we have carefully selected and tested each component to provide an exceptional ride experience at an aggressive price.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 160mm/155mm WHEEL SIZE: 29″ BUILD WEIGHT (NO PEDALS) N/A FRAME WEIGHT: 2,7 Kg. HT ANGLE: 65.5 ̊ REACH: 410mm/16.1″ (Small) // 431mm/17.0″ (Medium) // 455mm/17.9″ (Large) // 471mm/18.5″ (XL) EXPERT BUILD SPECIFICATIONS
FRAME
- Carbine 29” Optimized Layup Monocoque UD Carbon Front and Rear Triangle
- Carbon top link, Ti hardware, internal shift, dropper post and brake routing
- ISCG05 mounts, flack guard armour, 155mm travel
FORK
Fox Performance Float 36, 29″, GRIP, 160mm Travel, 51mm offset, Boost 110x15mm, 3-positionSHOCK
Fox Performance Float X2, 230mm x 60mm (155mm), 2-position (open/firm)WHEELSET
WHEELS 29″ E*thirteen LG1 Enduro Alloy, 30mm inner width HUBS Intense Alloy Hubs, 6-bolt, Boost110x15mm Front, Boost 148x12mm Rear 28-hole RIMS 29″ E*thirteen LG1 Enduro Alloy, 30mm inner width, 28-hole SPOKES E*thirteen TIRES Front: Maxxis 29×2.50WT Minion DHF 60TPI EXO/TR Rear: Maxxis 29×2.40 Minion DHR II 60TPI EXO/TR
DRIVETRAIN
SHIFTER Sram NX Eagle 12speed Trigger REAR DERAILLEUR Sram NX Eagle 12speed FRONT DERAILLEUR N/A CRANK Sram NX Eagle 12speed, DUB, 32t, 170MM, Boost CASSETTE Sram PG1230 X1 Eagle 12speed, 11-50T CHAIN Sram NX Eagle 12speed CHAIN GUIDE BOTTOM BRACKET Tru-Vativ DUB Pressfit COMPONENTS
SADDLE WTB Silverado Sport w/ Cr-Mo Rails SEATPOST Intense Recon 31.6mm, 125mm Dropper (SM), 150mm Dropper (MD/LG), 170mm Dropper (XL) HANDLEBAR Intense Recon 780mm Alloy STEM Intense Recon 45mm HEADSET Intense Tapered, ZS44/EC49.40 BRAKESET Shimano M520 Hydraulic Disk 203mm Front & 180mm Rear GRIPS Intense *Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH)
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 385
15.2418
16.5448
17.6483
19.0B: EFFECTIVE TOP TUBE 603
23.7627
24.7655
25.8675
26.6C: STACK 616
24.3624
24.6632
24.9641
25.2D: REACH 410
16.1431
17.0455
17.9471
18.5E: BB HEIGHT 348
13.7348
13.7348
13.7348
13.7F: BB DROP 0.0 0.0 0.0 0.0 G: HEAD TUBE LENGTH 92
3.6100
3.9110
4.3120
4.7H: HEAD TUBE ANGLE 65.5 ° 65.5 ° 65.5 ° 65.5 ° I: SEAT TUBE ANGLE 74.0 ° 74.0 ° 74.0 ° 74.0 ° J: STANDOVER HEIGHT 830
32.7834
32.8834
32.8836
32.9K: CHAINSTAY LENGTH 445
17.5445
17.5445
17.5445
17.5L: WHEELBASE 1181
46.51205
47.41233
48.51253
49.3SUGGESTED RIDER HEIGHT 5’0″-5’6″ 5’5″-5’10” 5’9″-6’1″ 5’11”-6’6″ -
INTENSE 2020 CARBINE PRO BUILD
ROLL OVER THE TOUGHEST TERRAIN WITH SPEED AND CONFIDENCE. WITH JS ENDURO LINK SUSPENSION, 155MM OF TRAVEL, AND 29″ WHEELS, THE CARBINE IS READY TO CONQUER THE TRAIL OR MOUNTAIN BIKE PARK.
The Carbine Pro Build, we have carefully selected and tested each component to provide an exceptional ride experience at an aggressive price.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 160mm/155mm WHEEL SIZE: 29″ BUILD WEIGHT (NO PEDALS) N/A FRAME WEIGHT: 2,7 Kg. HT ANGLE: 65.5 ̊ REACH: 410mm/16.1″ (Small) // 431mm/17.0″ (Medium) // 455mm/17.9″ (Large) // 471mm/18.5″ (XL) PRO BUILD SPECIFICATIONS
FRAME
- Carbine 29” Optimized Layup Monocoque UD Carbon Front and Rear Triangle
- Carbon top link, Ti hardware, internal shift, dropper post and brake routing
- ISCG05 mounts, flack guard armour, 155mm travel
FORK
Fox Factory Float 36, 29″, 160mm Travel, GRIP 2, 51mm offset, Boost 110x15mm
SHOCK
Fox Factory Float X2, 230mm x 60mm (155mm), 2-position (open/firm)
WHEELSET
WHEELS 29″ E*thirteen LG1 Enduro Alloy, 30mm inner width HUBS E*Thirteen LG1, 6-bolt, 110x15mm Front, 148x12mm, XD rear 28-hole RIMS 29″ E*thirteen LG1 Enduro Alloy, 30mm inner width, 28-hole SPOKES E*thirteen TIRES Front: Maxxis 29×2.50WT Minion DHF 60TPI EXO/TR Rear: Maxxis 29×2.40 Minion DHR II 60TPI EXO/TR
DRIVETRAIN
SHIFTER Sram GX Eagle 12speed Trigger REAR DERAILLEUR Sram X01 Eagle 12speed FRONT DERAILLEUR N/A CRANK Tru-Vativ Descendant Alloy 6K Eagle 12speed, DUB, 32t, 170MM, Boost CASSETTE Sram XG1275 X1 Eagle 12speed, 10-50T CHAIN Sram GX Eagle 12speed CHAIN GUIDE BOTTOM BRACKET Tru-Vativ DUB Pressfit COMPONENTS
SADDLE Fabric Scoop Radius Elite w/ Cr-Mo Rails SEATPOST Fox Factory Transfer 31.6mm, 125mm Dropper (SM), 150mm Dropper (MD/LG), 175mm Dropper (XL) HANDLEBAR Intense Recon 780mm Carbon STEM Intense Recon ELITE 40mm HEADSET Cane Creek 40 Series, ZS44/EC49.40 BRAKESET Shimano XT M8020 Hydraulic Disk 203mm Front & 180mm Rear GRIPS Intense *Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH)
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 385
15.2418
16.5448
17.6483
19.0B: EFFECTIVE TOP TUBE 603
23.7627
24.7655
25.8675
26.6C: STACK 616
24.3624
24.6632
24.9641
25.2D: REACH 410
16.1431
17.0455
17.9471
18.5E: BB HEIGHT 348
13.7348
13.7348
13.7348
13.7F: BB DROP 0.0 0.0 0.0 0.0 G: HEAD TUBE LENGTH 92
3.6100
3.9110
4.3120
4.7H: HEAD TUBE ANGLE 65.5 ° 65.5 ° 65.5 ° 65.5 ° I: SEAT TUBE ANGLE 74.0 ° 74.0 ° 74.0 ° 74.0 ° J: STANDOVER HEIGHT 830
32.7834
32.8834
32.8836
32.9K: CHAINSTAY LENGTH 445
17.5445
17.5445
17.5445
17.5L: WHEELBASE 1181
46.51205
47.41233
48.51253
49.3SUGGESTED RIDER HEIGHT 5’0″-5’6″ 5’5″-5’10” 5’9″-6’1″ 5’11”-6’6″ -
INTENSE 2020 CARBINE ELITE BUILD
ROLL OVER THE TOUGHEST TERRAIN WITH SPEED AND CONFIDENCE. WITH JS ENDURO LINK SUSPENSION, 155MM OF TRAVEL, AND 29″ WHEELS, THE CARBINE IS READY TO CONQUER THE TRAIL OR MOUNTAIN BIKE PARK.
The Carbine Elite Build, we have carefully selected and tested each component to provide an exceptional ride experience at an aggressive price.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 160mm/155mm WHEEL SIZE: 29″ BUILD WEIGHT (NO PEDALS) N/A FRAME WEIGHT: 2,7 Kg. HT ANGLE: 65.5 ̊ REACH: 410mm/16.1″ (Small) // 431mm/17.0″ (Medium) // 455mm/17.9″ (Large) // 471mm/18.5″ (XL) ELITE BUILD SPECIFICATIONS
FRAME
- Carbine 29” Optimized Layup Monocoque UD Carbon Front and Rear Triangle
- Carbon top link, Ti hardware, internal shift, dropper post and brake routing
- ISCG05 mounts, flack guard armour, 155mm travel
FORK
Fox Factory Float 36, 29″ 160mm Travel, GRIP 2, 51mm offset, Boost 110x15mmSHOCK
Fox Factory Float X2, 230mm x 60mm (155mm), 2-position (open/firm)WHEELSET
WHEELS 29″ E*thirteen LG1 Enduro Race Carbon, 30mm inner width HUBS E*Thirteen LG1, 6-bolt, Boost 110x15mm Front, Boost 148x12mm, XD rear 28-hole RIMS 29″ E*thirteen LG1 Enduro Race Carbon, 30mm inner width, 28-hole SPOKES E*thirteen TIRES Front: Maxxis 29×2.50WT Minion DHF 60TPI EXO/TR Rear: Maxxis 29×2.40 Minion DHR II 60TPI EXO/TR
DRIVETRAIN
SHIFTER Sram X01 Eagle 12speed Trigger REAR DERAILLEUR Sram X01 Eagle 12speed FRONT DERAILLEUR N/A CRANK Tru-Vativ Descendant Carbon Eagle 12speed, DUB, 32t, 170mm, Boost CASSETTE Sram XG1275 X1 Eagle 12speed, 10-50T CHAIN Sram GX Eagle 12speed CHAIN GUIDE BOTTOM BRACKET Tru-Vativ DUB Pressfit COMPONENTS
SADDLE Fabric Scoop Radius Elite w/ Cr-Mo Rails SEATPOST Fox Factory Transfer 31.6mm, 125mm Dropper (SM), 150mm Dropper (MD/LG), 175mm Dropper (XL) HANDLEBAR Intense Recon 780mm Carbon STEM Intense Recon ELITE 40mm HEADSET Cane Creek 40 Series, ZS44/EC49.40 BRAKESET Shimano XT M8020 Hydraulic Disk 203mm Front & 180mm Rear GRIPS Intense *Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH)
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 385
15.2418
16.5448
17.6483
19.0B: EFFECTIVE TOP TUBE 603
23.7627
24.7655
25.8675
26.6C: STACK 616
24.3624
24.6632
24.9641
25.2D: REACH 410
16.1431
17.0455
17.9471
18.5E: BB HEIGHT 348
13.7348
13.7348
13.7348
13.7F: BB DROP 0.0 0.0 0.0 0.0 G: HEAD TUBE LENGTH 92
3.6100
3.9110
4.3120
4.7H: HEAD TUBE ANGLE 65.5 ° 65.5 ° 65.5 ° 65.5 ° I: SEAT TUBE ANGLE 74.0 ° 74.0 ° 74.0 ° 74.0 ° J: STANDOVER HEIGHT 830
32.7834
32.8834
32.8836
32.9K: CHAINSTAY LENGTH 445
17.5445
17.5445
17.5445
17.5L: WHEELBASE 1181
46.51205
47.41233
48.51253
49.3SUGGESTED RIDER HEIGHT 5’0″-5’6″ 5’5″-5’10” 5’9″-6’1″ 5’11”-6’6″ -
INTENSE 2020 TRACER FACTORY FRAME AND SHOCK
SINCE THE 1ST GENERATION TRACER WAS INTRODUCED IN 1999, THE BIKE HAS BEEN POSITIONED AS OUR MOST AGGRESSIVE 27.5″ ENDURO BIKE IN THE LINE – AGILE ON CLIMBS AND DESTROYS THE DESCENTS.
The Tracer Factory frameset comes with an optimized layup carbon frame, a carbon top link and steel hardware.
FRAME AND SHOCK SPECIFICATIONS
FRAME
- Tracer 275 Optimized UD Carbon Front and Rear Triangle
- Carbon Top Link, Internal Cable Routing, Integrated Protectors
- w/ BOOST 148 x12 mm Spacing, 165 mm travel
SHOCK
- Fox Factory Float X2, 8.5×2.5″ (165mm)
- 2-position (open/firm)
FIND YOUR SIZING
GEOMETRY (MM / INCH)
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 396
15.6434
17.1459
18.1485
19.1B: EFFECTIVE TOP TUBE 571
22.5597
23.5622
24.5649
25.6C: STACK 589
23.3600
23.8604
24.2614
24.7D: REACH 414
15.8436
16.8460
17.8483
19.0E: BB HEIGHT 343
13.5″343
13.5″343
13.5″343
13.5″F: BB DROP – – – – G: HEAD TUBE LENGTH 102
4.0115
4.5119
4.7130
5.1H: HEAD TUBE ANGLE 65.5° 65.5° 65.5° 65.5° I: SEAT TUBE ANGLE 75.0° 75.0° 75.0 ° 75.0 ° J: STANDOVER HEIGHT 795
31.3801
31.5805
31.7813
32.0K: CHAINSTAY LENGTH 432
17.0432
17.0432
17.0432
17.0L: WHEELBASE 1154
45.41181
46.51207
47.51235
48.6 -
INTENSE 2020 TRACER EXPERT BUILD
SINCE THE 1ST GENERATION TRACER WAS INTRODUCED IN 1999, THE BIKE HAS BEEN POSITIONED AS OUR MOST AGGRESSIVE 27.5″ ENDURO BIKE IN THE LINE – AGILE ON CLIMBS AND DESTROYS THE DESCENTS.
The EXPERT Build Tracer offers a competitive spec with our optimized carbon enduro frame. We’ve carefully selected and tested each component to provide an exceptional ride experience at an aggressive price.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 160mm/165mm WHEEL SIZE: 27.5″ / 650b BUILD WEIGHT (NO PEDALS) 14,1 Kg. FRAME WEIGHT: 2,7 Kg. (w/out shock) HT ANGLE: 65.5 ̊ REACH: 414mm / 15.8″ (Small) // 436mm / 16.8″ (Medium) // 460mm / 17.8″ (Large) // 483mm / 19″ (XL) EXPERT BUILD SPECIFICATIONS
FRAME
- Tracer 275 Optimized Layup Monocoque UD Carbon Front and Rear Triangle
- Carbon Top Link, Internal cable Routing, Integrated protectors
- w/ BOOST 148 x12 mm spacing, 165 mm travel
FORK
- Fox Performance Float 36, 27.5″,
- GRIP, 160mm Travel, 44mm offset,
- Boost 110x15mm, 3-position
SHOCK
Fox Performance Float X2, 8.5×2.5″ (165mm), 2-position (open/firm)
WHEELSET
WHEELS 27.5″ E*thirteen LG1 Enduro Alloy, 30mm inner width HUBS Intense Alloy Hubs, 6-bolt, Boost110x15mm Front, Boost 148x12mm Rear 28-hole RIMS 27.5″ E*thirteen LG1 Enduro Alloy, 30mm inner width, 28-hole SPOKES E*thirteen TIRES Front: Maxxis 27.5×2.50WT Minion DHF 60TPI EXO/TR Rear: Maxxis 27.5×2.40 Minion DHR II 60TPI EXO/TR
DRIVETRAIN
SHIFTER Sram NX Eagle 12 speed REAR DERAILLEUR Sram NX Eagle, 12 speed FRONT DERAILLEUR N/A CRANK Sram NX Eagle 12speed, DUB, 32t, 170mm, Boost CASSETTE Sram PG1230 X1 Eagle 12speed, 11-50T CHAIN Sram NX Eagle 12 speed CHAIN GUIDE N/A BOTTOM BRACKET SRAM DUB Pressfit COMPONENTS
SADDLE WTB Silverado Sport w/ Cr-Mo Rails SEATPOST Intense Recon 31.6mm, 125mm Dropper (SM), 150mm Dropper (MD/LG), 170mm Dropper (XL) HANDLEBAR Intense Recon 780mm Alloy STEM Intense Recon 45mm HEADSET Intense Tapered, ZS44/EC49.40 BRAKESET Shimano M520 Hydraulic Disk 203mm Front & 180mm Rear GRIPS Intense *Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH)
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 396
15.6434
17.1459
18.1485
19.1B: EFFECTIVE TOP TUBE 571
22.5597
23.5622
24.5649
25.6C: STACK 589
23.3600
23.8604
24.2614
24.7D: REACH 414
15.8436
16.8460
17.8483
19.0E: BB HEIGHT 343
13.5″343
13.5″343
13.5″343
13.5″F: BB DROP – – – – G: HEAD TUBE LENGTH 102
4.0115
4.5119
4.7130
5.1H: HEAD TUBE ANGLE 65.5° 65.5° 65.5° 65.5° I: SEAT TUBE ANGLE 75.0° 75.0° 75.0° 75.0° J: STANDOVER HEIGHT 795
31.3801
31.5805
31.7813
32.0K: CHAINSTAY LENGTH 432
17.0432
17.0432
17.0432
17.0L: WHEELBASE 1154
45.41181
46.51207
47.51235
48.6 -
INTENSE 2020 TRACER PRO BUILD
SINCE THE 1ST GENERATION TRACER WAS INTRODUCED IN 1999, THE BIKE HAS BEEN POSITIONED AS OUR MOST AGGRESSIVE 27.5″ ENDURO BIKE IN THE LINE – AGILE ON CLIMBS AND DESTROYS THE DESCENTS.
The Pro Build Tracer offers a competitive spec with our optimized carbon enduro frame. We’ve carefully selected and tested each component to provide an exceptional ride experience at an aggressive price.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 160mm/165mm WHEEL SIZE: 27.5″ / 650b BUILD WEIGHT (NO PEDALS) 13,6 Kg. FRAME WEIGHT: 2,7 Kg. (w/out shock) HT ANGLE: 65.5 ̊ REACH: 414mm / 15.8″ (Small) // 436mm / 16.8″ (Medium) // 460mm / 17.8″ (Large) // 483mm / 19″ (XL) PRO BUILD SPECIFICATIONS
FRAME
- Tracer 275 Optimized Layup Monocoque UD Carbon Front and Rear Triangle
- Carbon Top Link, Internal cable Routing, Integrated protectors
- w/ BOOST 148 x12 mm spacing, 165 mm travel
FORK
Fox Factory Float 36, 27.5″, 160mm Travel, GRIP 2, 44mm offset, Boost 110x15mm
SHOCK
Fox Factory Float X2, 8.5×2.5″ (165mm), 2-position (open/firm)
WHEELSET
WHEELS 27.5″ E*thirteen LG1 Enduro Alloy, 30mm inner width HUBS E*Thirteen LG1, 6-bolt, Boost 110x15mm Front, Boost 148x12mm, XD rear 28-hole RIMS 27.5″ E*thirteen LG1 Enduro Alloy, 30mm inner width, 28-hole SPOKES E*thirteen TIRES Front: Maxxis 27.5×2.50WT Minion DHF 60TPI EXO/TR Rear: Maxxis 27.5×2.40 Minion DHR II 60TPI EXO/TR
DRIVETRAIN
SHIFTERS Sram GX Eagle 12 speed REAR DERAILLEUR Sram X01 Eagle, 12 speed FRONT DERAILLEUR N/A CRANK Tru-Vativ Descendant Alloy 6K Eagle 12sp / DUB / 32t / 170MM / Boost CASSETTE Sram XG1295 X01 Eagle 12 speed, 10-50T CHAIN Sram GX Eagle 12 speed CHAIN GUIDE N/A BOTTOM BRACKET Tru-Vativ DUB Pressfit COMPONENTS
SADDLE Fabric Scoop Radius Elite SEATPOST Fox Factory Transfer 31.6mm / 125mm SM / 150mm MD-LG / 175mm XL HANDLEBAR Intense Recon 780mm Carbon, 31.8 mm diameter STEM Intense Recon ELITE 40mm HEADSET Cane Creek 40, alloy BRAKESET Shimano XT M8020 Hydraulic Disk 203mm Front & 180mm Rear GRIPS Intense *Parts/Spec are subject to change without notice.
FIND YOUR SIZING
GEOMETRY (MM / INCH)
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 396
15.6434
17.1459
18.1485
19.1B: EFFECTIVE TOP TUBE 571
22.5597
23.5622
24.5649
25.6C: STACK 589
23.3600
23.8604
24.2614
24.7D: REACH 414
15.8436
16.8460
17.8483
19.0E: BB HEIGHT 343
13.5″343
13.5″343
13.5″343
13.5″F: BB DROP – – – – G: HEAD TUBE LENGTH 102
4.0115
4.5119
4.7130
5.1H: HEAD TUBE ANGLE 65.5° 65.5° 65.5° 65.5° I: SEAT TUBE ANGLE 75.0° 75.0° 75.0° 75.0° J: STANDOVER HEIGHT 795
31.3801
31.5805
31.7813
32.0K: CHAINSTAY LENGTH 432
17.0432
17.0432
17.0432
17.0L: WHEELBASE 1154
45.41181
46.51207
47.51235
48.6 -
INTENSE 2020 TRACER ELITE BUILD
SINCE THE 1ST GENERATION TRACER WAS INTRODUCED IN 1999, THE BIKE HAS BEEN POSITIONED AS OUR MOST AGGRESSIVE 27.5″ ENDURO BIKE IN THE LINE – AGILE ON CLIMBS AND DESTROYS THE DESCENTS.
The ELITE Build Tracer offers a competitive spec with our optimized carbon enduro frame. We’ve carefully selected and tested each component to provide an exceptional ride experience at an aggressive price.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 160mm/165mm WHEEL SIZE: 27.5″ / 650b BUILD WEIGHT (NO PEDALS) 13,2 Kg. FRAME WEIGHT: 2,7 Kg. (w/out shock) HT ANGLE: 65.5 ̊ REACH: 414mm / 15.8″ (Small) // 436mm / 16.8″ (Medium) // 460mm / 17.8″ (Large) // 483mm / 19″ (XL) ELITE BUILD SPECIFICATIONS
FRAME
- Tracer 275 Optimized Layup Monocoque UD Carbon Front and Rear Triangle,
- Carbon Top Link, Internal cable Routing, Integrated protectors
- w/ BOOST 148 x12 mm spacing, 165 mm travel
FORK
Fox Factory Float 36, 27.5″, 160mm Travel, GRIP 2, 44mm offset, Boost 110x15mm
SHOCK
Fox Factory Float X2, 8.5×2.5″ (165mm), 2-position (open/firm)
WHEELSET
WHEELS 27.5″ E*thirteen LG1 Enduro Race Carbon, 30mm inner width HUBS E*Thirteen LG1, 6-bolt, Boost 110x15mm Front, Boost 148x12mm, XD rear 28-hole RIMS 27.5″ E*thirteen LG1 Enduro Race Carbon, 30mm inner width, 28-hole SPOKES E*thirteen TIRES Front: Maxxis 27.5×2.50WT Minion DHF 60TPI EXO/TR Rear: Maxxis 27.5×2.40 Minion DHR II 60TPI EXO/TR
DRIVETRAIN
SHIFTER Sram X01 Eagle 12 speed REAR DERAILLEUR Sram X01 Eagle, 12 speed FRONT DERAILLEUR N/A CRANK Tru-Vativ Descendant CARBON 12sp / DUB / 32t / 170MM / Boost CASSETTE Sram XG1295 X01 Eagle 12 speed, 10-50T CHAIN Sram X01 Eagle 12 speed CHAIN GUIDE N/A BOTTOM BRACKET Tru-Vativ DUB Pressfit COMPONENTS
SADDLE Fabric Scoop Radius Elite SEATPOST Fox Factory Transfer 31.6mm / 125mm SM / 150mm MD-LG / 175mm XL HANDLEBAR Intense Recon 780mm Carbon, 31.8 mm diameter STEM Intense Recon ELITE 40mm HEADSET Cane Creek 40, alloy BRAKESET Shimano XT M8020 Hydraulic Disk 203mm Front & 180mm Rear GRIPS Intense *Parts/Spec are subject to change without notice.
FIND YOUR SIZING
GEOMETRY (MM / INCH)
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 396
15.6434
17.1459
18.1485
19.1B: EFFECTIVE TOP TUBE 571
22.5597
23.5622
24.5649
25.6C: STACK 589
23.3600
23.8604
24.2614
24.7D: REACH 414
15.8436
16.8460
17.8483
19.0E: BB HEIGHT 343
13.5″343
13.5″343
13.5″343
13.5″F: BB DROP – – – – G: HEAD TUBE LENGTH 102
4.0115
4.5119
4.7130
5.1H: HEAD TUBE ANGLE 65.5° 65.5° 65.5° 65.5° I: SEAT TUBE ANGLE 75.0° 75.0° 75.0° 75.0° J: STANDOVER HEIGHT 795
31.3801
31.5805
31.7813
32.0K: CHAINSTAY LENGTH 432
17.0432
17.0432
17.0432
17.0L: WHEELBASE 1154
45.41181
46.51207
47.51235
48.6 -
INTENSE PRIMER 29″ – FACTORY FRAME AND SHOCK
TRUE TO THE TRAIL. THE INTENSE PRIMER 29 IS A CONFIDENCE INSPIRING TRAIL BIKE WITH 29″ WHEELS.
EVOLVED FROM EXCELLENCE THE NEW INTENSE PRIMER IS TRUE TO THE TRAIL PROVIDING OUTSTANDING PERFORMANCE THAT STANDS OUT FROM THE CROWD THANKS TO A STRIKING DESIGN WHILE DELIVERING A CONFIDENCE-INSPIRING TRAIL RIDE EVERY TIME.
Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new fully-carbon frame, utilizing the latest technology and specifically tailored for each of the 27.5” and 29” wheel-sizes with a hands-on, passionate approach. Complimenting the frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is ideal for long climbs and chunky descents.
FRAME & SHOCK SPECIFICATIONS
FRAME
- Primer 29” Trail Monocoque Carbon Frame
- Optimized Layup Carbon fiber
- Carbon top link, Titanium hardware, Internal shift, dropper post and brake routing
- ISCG05 mounts, Flak guard armor, Threaded bottom bracket
SHOCK
Fox Factory DPX2 / 210MM x 50MM / 3-position (Open, Trail, Lock-out)
HARDWARE
Shock bolts, Upper & Lower Links, Rear Axle, Derailleur Hanger
*Parts/Spec are subject to change without notice.
FIND YOUR SIZING
GEOMETRY (MM / INCH) LOW SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 577 mm/ 22.7″ 607.4 mm/ 23.9″ 635.6 mm/ 25″ 672 mm/ 26.5″ C: STACK 610.9 mm / 24″ 611 mm / 24″ 620.4 mm / 24.42″ 638.9 mm/ 25.2″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ F: BB DROP 30.3 mm/ 1.2″ 30.4 mm/ 1.2″ 30.52 mm/ 1.2″ 30.66 mm/ 1.21″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 65.9˚ 65.9˚ 65.9˚ 65.9˚ I: SEAT TUBE ANGLE (EFFECTIVE) 75˚ 75˚ 75˚ 75˚ J: STANDOVER HEIGHT 813.3 mm/ 32″ 812.6 mm/ 32″ 817 mm/ 32.16″ 826 mm/ 32.5″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1167.9 mm/ 46″ 1198 mm/ 47.2″ 1226.9 mm/ 48.3″ 1264.9 mm/ 49.8″ GEOMETRY (MM / INCH) LOWER SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 579.5 mm/ 22.8″ 609.6 mm/ 24.0″ 637.9 mm/ 25.1″ 674.3 mm/ 26.55″ C: STACK 615 mm/ 24.2″ 615.4 mm/ 24.23″ 624.9 mm / 24.6″ 643.5 mm/ 25.3″ D: REACH 414 mm/ 16.3″ 444 mm/ 17.48″ 469 mm/ 18.46″ 499 mm/ 19.64″ E: BB HEIGHT 337 mm/ 13.3″ 337 mm/ 13.3″ 337 mm/ 13.3″ 337 mm/ 13.3″ F: BB DROP 37.7 mm/ 1.48″ 37.9 mm/ 1.48″ 38.1 mm/ 1.5″ 38.4 mm/ 1.5″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 65.3˚ 65.3˚ 65.3˚ 65.3˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.3˚ 74.3˚ 74.3˚ 74.3˚ J: STANDOVER HEIGHT 807.6 mm/ 31.8″ 807.6 mm/ 31.8″ 811 mm/ 31.9″ 820 mm/ 32.3″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1168.9 mm/ 46″ 1199 mm/ 47.2″ 1227.82 mm/ 48.3″ 1265.8 mm/ 49.83″ -
INTENSE PRIMER 29″ – EXPERT BUILD
TRUE TO THE TRAIL. THE INTENSE PRIMER 29 IS A CONFIDENCE INSPIRING TRAIL BIKE WITH 29″ WHEELS.
EVOLVED FROM EXCELLENCE THE NEW INTENSE PRIMER IS TRUE TO THE TRAIL PROVIDING OUTSTANDING PERFORMANCE THAT STANDS OUT FROM THE CROWD THANKS TO A STRIKING DESIGN WHILE DELIVERING A CONFIDENCE-INSPIRING TRAIL RIDE EVERY TIME.
Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new fully-carbon frame, utilizing the latest technology and specifically tailored for each of the 27.5” and 29” wheel-sizes with a hands-on, passionate approach. Complimenting the frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is ideal for long climbs and chunky descents.
EXPERT BUILD SPECIFICATIONS
FRAME
- Primer 29” Trail Monocoque Carbon Frame
- Optimized Layup Carbon fiber
- Carbon top link, Titanium hardware, Internal shift, dropper post and brake routing
- ISCG05 mounts, Flak guard armor
FORK
Fox Performance 34 / 150MM / Boost / Quick Release Axle / 51mm Offset
SHOCK
Fox Performance DPX2 / 210MM x 50MM / 3-position (Open, Trail, Lock-out)
WHEELSET
WHEELS E13 LG1 Enduro Race 30MM / Boost HUBS LG1 Race SL hubs 32 Hole 15×110 front, 12×148 rear hub 6-bolt, XD RIMS E13 LG1 Enduro Race 30MM / Boost SPOKES E13 TIRES Front: Maxxis High Roller II 29″ x 2.50” // Rear: Maxxis Agressor 29x 2.30” DRIVETRAIN
SHIFTERS Sram NX Eagle 12-speed REAR DERAILLEUR Sram NX Eagle 12-speed FRONT DERAILLEUR N/A CRANK Sram NX Eagle 12sp / DUB / 32t / 170MM / Boost CASSETTE Sram PG 1230 Eagle 12-speed / 11-50t CHAIN Sram NX Eagle 12-speed CHAIN GUIDE N/A BOTTOM BRACKET DUB BSA 73mm Bottom Bracket (Threaded) COMPONENTS
SADDLE WTB Silverado Sport SEATPOST INTENSE Recon Dropper 31.6MM / 125MM SM / 150MM MD-LG / 175MM XL (Frame Size Specific) HANDLEBAR INTENSE Recon 780MM STEM INTENSE Recon Elite 45MM HEADSET INTENSE Tapered BRAKESET Shimano M520 Front (Four Piston) 180mm Rotors / Shimano M500 Front Rear (Two Piston) 180mm Rotors GRIPS INTENSE *Parts/Spec are subject to change without notice.
Included with each complete bike is an INTENSE branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH) LOW SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 577 mm/ 22.7″ 607.4 mm/ 23.9″ 635.6 mm/ 25″ 672 mm/ 26.5″ C: STACK 610.9 mm / 24″ 611 mm / 24″ 620.4 mm / 24.42″ 638.9 mm/ 25.2″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ F: BB DROP 30.3 mm/ 1.2″ 30.4 mm/ 1.2″ 30.52 mm/ 1.2″ 30.66 mm/ 1.21″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 65.9˚ 65.9˚ 65.9˚ 65.9˚ I: SEAT TUBE ANGLE (EFFECTIVE) 75˚ 75˚ 75˚ 75˚ J: STANDOVER HEIGHT 813.3 mm/ 32″ 812.6 mm/ 32″ 817 mm/ 32.16″ 826 mm/ 32.5″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1167.9 mm/ 46″ 1198 mm/ 47.2″ 1226.9 mm/ 48.3″ 1264.9 mm/ 49.8″ GEOMETRY (MM / INCH) LOWER SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 579.5 mm/ 22.8″ 609.6 mm/ 24.0″ 637.9 mm/ 25.1″ 674.3 mm/ 26.55″ C: STACK 615 mm/ 24.2″ 615.4 mm/ 24.23″ 624.9 mm / 24.6″ 643.5 mm/ 25.3″ D: REACH 414 mm/ 16.3″ 444 mm/ 17.48″ 469 mm/ 18.46″ 499 mm/ 19.64″ E: BB HEIGHT 337 mm/ 13.3″ 337 mm/ 13.3″ 337 mm/ 13.3″ 337 mm/ 13.3″ F: BB DROP 37.7 mm/ 1.48″ 37.9 mm/ 1.48″ 38.1 mm/ 1.5″ 38.4 mm/ 1.5″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 65.3˚ 65.3˚ 65.3˚ 65.3˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.3˚ 74.3˚ 74.3˚ 74.3˚ J: STANDOVER HEIGHT 807.6 mm/ 31.8″ 807.6 mm/ 31.8″ 811 mm/ 31.9″ 820 mm/ 32.3″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1168.9 mm/ 46″ 1199 mm/ 47.2″ 1227.82 mm/ 48.3″ 1265.8 mm/ 49.83″ -
INTENSE PRIMER 29″ – PRO BUILD
TRUE TO THE TRAIL. THE INTENSE PRIMER 29 IS A CONFIDENCE INSPIRING TRAIL BIKE WITH 29″ WHEELS.
EVOLVED FROM EXCELLENCE THE NEW INTENSE PRIMER IS TRUE TO THE TRAIL PROVIDING OUTSTANDING PERFORMANCE THAT STANDS OUT FROM THE CROWD THANKS TO A STRIKING DESIGN WHILE DELIVERING A CONFIDENCE-INSPIRING TRAIL RIDE EVERY TIME.
Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new fully-carbon frame, utilizing the latest technology and specifically tailored for each of the 27.5” and 29” wheel-sizes with a hands-on, passionate approach. Complimenting the frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is ideal for long climbs and chunky descents.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 150mm/140mm WHEEL SIZE: 29″ BUILD WEIGHT (TUBELESS, NO PEDALS, SIZE MEDIUM)
13,29kg FRAME WEIGHT: NA HT ANGLE: 65.9 ̊ / 65.3 ̊ REACH: 420mm / 16.5″ (Small) // 450mm / 17.72″ (Medium) // 475mm / 18.7″ (Large) // 505mm / 19.9″ (XL) PRO BUILD SPECIFICATIONS
FRAME
- Primer 29” Trail Monocoque Carbon Frame
- Optimized Layup Carbon fiber
- Carbon top link, Titanium hardware, Internal shift, dropper post and brake routing
- ISCG05 mounts, Flak guard armor
FORK
Fox Factory 34 / 150MM / Boost / Quick Release Axle / 51mm Offset
SHOCK
Fox Factory DPX2 / 210MM x 50MM / 3-position (Open, Trail, Lock-out)
WHEELSET
WHEELS E13 LG1 Enduro Race 30MM / Boost HUBS LG1 Race SL hubs 32 Hole 15×110 front, 12×148 rear hub 6-bolt, XD RIMS E13 LG1 Enduro Race 30MM / Boost SPOKES E13 TIRES Front: Maxxis High Roller II 29″ x 2.50” // Rear: Maxxis Agressor 29x 2.30” DRIVETRAIN
SHIFTERS Sram GX Eagle 12-speed REAR DERAILLEUR Sram X01 Eagle 12-speed FRONT DERAILLEUR N/A CRANK Tru-Vativ Stylo Alloy 6K Eagle 12sp / DUB / 32t / 170MM / Boost CASSETTE Sram XG 1295 Eagle 12-speed 10-50t CHAIN Sram GX Eagle 12-speed CHAIN GUIDE N/A BOTTOM BRACKET DUB BSA 73mm Bottom Bracket (Threaded) COMPONENTS
SADDLE Fabric Scoop Radius Elite SEATPOST Fox Factory Transfer 31.6MM / 125MM SM / 150MM MD-LG / 175MM XL (Frame Size Specific) HANDLEBAR Intense Recon Carbon 780MM STEM Intense Recon Elite 50MM HEADSET Cane Creek 40 / ZS44-EC49 BRAKESET Shimano XT M8020 Front (Four Piston) 180mm Rotors / Shimano XT M8000 Rear (Two Piston) 180mm Rotors GRIPS Intense *Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH) LOW SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 577 mm/ 22.7″ 607.4 mm/ 23.9″ 635.6 mm/ 25″ 672 mm/ 26.5″ C: STACK 610.9 mm / 24″ 611 mm / 24″ 620.4 mm / 24.42″ 638.9 mm/ 25.2″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ F: BB DROP 30.3 mm/ 1.2″ 30.4 mm/ 1.2″ 30.52 mm/ 1.2″ 30.66 mm/ 1.21″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 65.9˚ 65.9˚ 65.9˚ 65.9˚ I: SEAT TUBE ANGLE (EFFECTIVE) 75˚ 75˚ 75˚ 75˚ J: STANDOVER HEIGHT 813.3 mm/ 32″ 812.6 mm/ 32″ 817 mm/ 32.16″ 826 mm/ 32.5″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1167.9 mm/ 46″ 1198 mm/ 47.2″ 1226.9 mm/ 48.3″ 1264.9 mm/ 49.8″ GEOMETRY (MM / INCH) LOWER SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 579.5 mm/ 22.8″ 609.6 mm/ 24.0″ 637.9 mm/ 25.1″ 674.3 mm/ 26.55″ C: STACK 615 mm/ 24.2″ 615.4 mm/ 24.23″ 624.9 mm / 24.6″ 643.5 mm/ 25.3″ D: REACH 414 mm/ 16.3″ 444 mm/ 17.48″ 469 mm/ 18.46″ 499 mm/ 19.64″ E: BB HEIGHT 337 mm/ 13.3″ 337 mm/ 13.3″ 337 mm/ 13.3″ 337 mm/ 13.3″ F: BB DROP 37.7 mm/ 1.48″ 37.9 mm/ 1.48″ 38.1 mm/ 1.5″ 38.4 mm/ 1.5″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 65.3˚ 65.3˚ 65.3˚ 65.3˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.3˚ 74.3˚ 74.3˚ 74.3˚ J: STANDOVER HEIGHT 807.6 mm/ 31.8″ 807.6 mm/ 31.8″ 811 mm/ 31.9″ 820 mm/ 32.3″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1168.9 mm/ 46″ 1199 mm/ 47.2″ 1227.82 mm/ 48.3″ 1265.8 mm/ 49.83″ -
INTENSE PRIMER 29″ – ELITE BUILD
TRUE TO THE TRAIL. THE INTENSE PRIMER 29 IS A CONFIDENCE INSPIRING TRAIL BIKE WITH 29″ WHEELS.
EVOLVED FROM EXCELLENCE THE NEW INTENSE PRIMER IS TRUE TO THE TRAIL PROVIDING OUTSTANDING PERFORMANCE THAT STANDS OUT FROM THE CROWD THANKS TO A STRIKING DESIGN WHILE DELIVERING A CONFIDENCE-INSPIRING TRAIL RIDE EVERY TIME.
Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new fully-carbon frame, utilizing the latest technology and specifically tailored for each of the 27.5” and 29” wheel-sizes with a hands-on, passionate approach. Complimenting the frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is ideal for long climbs and chunky descents.
ELITE BUILD SPECIFICATIONS
FRAME
- Primer 29” Trail Monocoque Carbon Frame. Optimized Layup Carbon fiber
- Carbon top link, Titanium hardware, Internal shift, dropper post and brake routing
- ISCG05 mounts, Flak guard armor
FORK
Fox Factory 34 / 150MM / Boost / Quick Release Axle / 51mm Offset
SHOCK
Fox Factory DPX2 / 210MM x 50MM / 3-position (Open, Trail, Lock-out)
WHEELSET
WHEELS E13 LG1 Enduro Race Carbon 30MM / Boost HUBS LG1 Race SL hubs 32 Hole 15×110 front, 12×148 rear hub 6-bolt, XD RIMS E13 LG1 Enduro Race Carbon 30MM / Boost SPOKES E13 TIRES Front: Maxxis High Roller II 29″ x 2.50” // Rear: Maxxis Agressor 29x 2.30” DRIVETRAIN
SHIFTERS Sram X01 Eagle 12-speed REAR DERAILLEUR Sram X01 Eagle 12-speed FRONT DERAILLEUR N/A CRANK Tru-Vativ Stylo Carbon Eagle 12sp / DUB / 32t / 170MM / Boost CASSETTE Sram XG 1295 Eagle 12-speed 10-50t CHAIN Sram GX Eagle 12-speed CHAIN GUIDE N/A BOTTOM BRACKET DUB BSA 73mm Bottom Bracket (Threaded) COMPONENTS
SADDLE Fabric Scoop Radius Elite SEATPOST Fox Factory Transfer 31.6MM / 125MM SM / 150MM MD-LG / 175MM XL (Frame Size Specific) HANDLEBAR Intense Recon Carbon 780MM STEM Intense Recon Elite 50MM HEADSET Cane Creek 40 / ZS44-EC49 BRAKESET Shimano XT M8020 Front (Four Piston) 180mm Rotors / Shimano XT M8000 Rear (Two Piston) 180mm Rotors GRIPS Intense *Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH) LOW SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 577 mm/ 22.7″ 607.4 mm/ 23.9″ 635.6 mm/ 25″ 672 mm/ 26.5″ C: STACK 610.9 mm / 24″ 611 mm / 24″ 620.4 mm / 24.42″ 638.9 mm/ 25.2″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ F: BB DROP 30.3 mm/ 1.2″ 30.4 mm/ 1.2″ 30.52 mm/ 1.2″ 30.66 mm/ 1.21″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 65.9˚ 65.9˚ 65.9˚ 65.9˚ I: SEAT TUBE ANGLE (EFFECTIVE) 75˚ 75˚ 75˚ 75˚ J: STANDOVER HEIGHT 813.3 mm/ 32″ 812.6 mm/ 32″ 817 mm/ 32.16″ 826 mm/ 32.5″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1167.9 mm/ 46″ 1198 mm/ 47.2″ 1226.9 mm/ 48.3″ 1264.9 mm/ 49.8″ GEOMETRY (MM / INCH) LOWER SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 579.5 mm/ 22.8″ 609.6 mm/ 24.0″ 637.9 mm/ 25.1″ 674.3 mm/ 26.55″ C: STACK 615 mm/ 24.2″ 615.4 mm/ 24.23″ 624.9 mm / 24.6″ 643.5 mm/ 25.3″ D: REACH 414 mm/ 16.3″ 444 mm/ 17.48″ 469 mm/ 18.46″ 499 mm/ 19.64″ E: BB HEIGHT 337 mm/ 13.3″ 337 mm/ 13.3″ 337 mm/ 13.3″ 337 mm/ 13.3″ F: BB DROP 37.7 mm/ 1.48″ 37.9 mm/ 1.48″ 38.1 mm/ 1.5″ 38.4 mm/ 1.5″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 65.3˚ 65.3˚ 65.3˚ 65.3˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.3˚ 74.3˚ 74.3˚ 74.3˚ J: STANDOVER HEIGHT 807.6 mm/ 31.8″ 807.6 mm/ 31.8″ 811 mm/ 31.9″ 820 mm/ 32.3″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1168.9 mm/ 46″ 1199 mm/ 47.2″ 1227.82 mm/ 48.3″ 1265.8 mm/ 49.83″ -
INTENSE PRIMER S – FACTORY FRAME AND SHOCK
TRUE TO THE TRAIL. THE INTENSE PRIMER S IS AN AGGRESSIVE AND INNOVATIVE TRAIL BIKE WITH STAGGERED 29″ FRONT AND 27.5+” REAR WHEELS.
FOR MORE AGGRESSIVE TRAIL RIDERS THAT ARE LOOKING FOR A FIRMER AND MORE RESPONSIVE SET-UP, THE NEW INTENSE PRIMER S DELIVERS WHEN IT COMES TO ALL-ROUND TRAIL AND ENDURO RIDING PERFORMANCE. FEATURING ALL OF THE BENEFITS OF THE INTENSE PRIMER, THE S MODEL BOASTS AN INNOVATIVE 279 WHEEL SET-UP, WITH A 29” WHEEL IN THE FRONT FOR EASY ROLLING OVER TOUGH TERRAIN, WHILST ITS 27.5” REAR WHEEL OFFERS MAXIMUM MANEUVERABILITY AND TRACTION WHEN FIRING DOWN THE TRAILS. THE PRIMER S IS LIGHT FOR ENJOYABLE CLIMBING, BUT FAST AND AGGRESSIVE FOR THE CHALLENGING DESCENTS.
Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new fully-carbon frame, designed utilizing the very latest technologies and specifically tailored for each wheel-sizes with a hands-on, passionate approach. Complimenting the new frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is ideal for long climbs and chunky descents.
FRAME & SHOCK SPECIFICATIONS
FRAME
- PRIMER S “279” Trail Monocoque Carbon Frame
- Optimized Layup Carbon fiber
- Carbon top link, Titanium hardware, Internal shift, dropper post and brake routing
- ISCG05 mounts, Flak guard armor, Threaded bottom bracket
SHOCK
Fox Factory DPX2 / 210MM x 50MM / 3-position (Open, Trail, Lock-out)
HARDWARE
Shock bolts, Upper & Lower Links, Rear Axle, Derailleur Hanger
*Parts/Spec are subject to change without notice.
FIND YOUR SIZING
GEOMETRY (MM / INCH) LOW SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 580.3 mm/ 22.9″ 610.4 mm/ 24″ 638.7 mm/ 25.2″ 675.2 mm/ 26.6″ C: STACK 616.5 mm / 24.27″ 617 mm / 24.29″ 626.5 mm / 24.7″ 645.2 mm/ 25.4″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 334.6 mm/ 13.17″ 334.6 mm/ 13.17″ 334.6 mm/ 13.17″ 334.6 mm/ 13.17″ F: BB DROP 24.2 mm/ 0.95″ 24.5 mm/ 0.96″ 24.7 mm/ 0.97″ 25 mm/ 0.99″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 65.1˚ 65.1˚ 65.1˚ 65.1˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.1˚ 74.1˚ 74.1˚ 74.1˚ J: STANDOVER HEIGHT 805.6 mm/ 31.7″ 804.9 mm/ 31.7″ 809 mm/ 31.85″ 818 mm/ 32.2″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1167.8 mm/ 46″ 1197 mm/ 47.2″ 1226.9 mm/ 48.3″ 1264.8 mm/ 49.83″ GEOMETRY (MM / INCH) LOWER SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 582.5 mm/ 22.9″ 612.7 mm/ 24.1″ 641 mm/ 25.2″ 677.6 mm/ 26.68″ C: STACK 620.6 mm/ 24.4″ 621.3 mm/ 24.46″ 630.9 mm / 24.8″ 649.8 mm/ 25.6″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 327.2 mm/ 12.9″ 326.8 mm/ 12.9″ 326.8 mm/ 12.9″ 326.8 mm/ 12.9″ F: BB DROP 31.56 mm/ 1.24″ 31.95 mm/ 1.26″ 32.3 mm/ 1.27″ 32.8 mm/ 1.3″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 64.5˚ 64.5˚ 64.5˚ 64.5˚ I: SEAT TUBE ANGLE (EFFECTIVE) 73.5˚ 73.5˚ 73.5˚ 73.5˚ J: STANDOVER HEIGHT 799.9 mm/ 31.5″ 799.9 mm/ 31.5″ 803 mm/ 31.6″ 812.5 mm/ 32″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1168.7 mm/ 46″ 1198.7 mm/ 47.2″ 1227.71 mm/ 48.3″ 1265.7 mm/ 49.83″ -
INTENSE PRIMER S – EXPERT BUILD
TRUE TO THE TRAIL. THE INTENSE PRIMER S IS AN AGGRESSIVE AND INNOVATIVE TRAIL BIKE WITH STAGGERED 29″ FRONT AND 27.5+” REAR WHEELS.
FOR MORE AGGRESSIVE TRAIL RIDERS THAT ARE LOOKING FOR A FIRMER AND MORE RESPONSIVE SET-UP, THE NEW INTENSE PRIMER S DELIVERS WHEN IT COMES TO ALL-ROUND TRAIL AND ENDURO RIDING PERFORMANCE. FEATURING ALL OF THE BENEFITS OF THE INTENSE PRIMER, THE S MODEL BOASTS AN INNOVATIVE 279 WHEEL SET-UP, WITH A 29” WHEEL IN THE FRONT FOR EASY ROLLING OVER TOUGH TERRAIN, WHILST ITS 27.5” REAR WHEEL OFFERS MAXIMUM MANOEUVRABILITY AND TRACTION WHEN FIRING DOWN THE TRAILS. THE PRIMER S IS LIGHT FOR ENJOYABLE CLIMBING, BUT FAST AND AGGRESSIVE FOR THE CHALLENGING DESCENTS.
Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new fully-carbon frame, designed utilizing the very latest technologies and specifically tailored for each wheel-sizes with a hands-on, passionate approach. Complimenting the new frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is ideal for long climbs and chunky descents.
EXPERT BUILD SPECIFICATIONS
FRAME
- PRIMER S “279” Trail Monocoque Carbon Frame
- Optimized Layup Carbon fiber
- Carbon top link, Titanium hardware, Internal shift, dropper post and brake routing
- ISCG05 mounts, Flak guard armor
FORK
Fox Performance 36 / GRIP / 150MM / Boost / Quick Release Axle / 51mm Offset
SHOCK
Fox Performance DPX2 / 210MM x 50MM / 3-position (Open, Trail, Lock-out)
WHEELSET
WHEELS E13 LG1 Enduro Race / 29” x 30MM Front / 27.5” x 35MM Rear / Boost HUBS INTENSE alloy hubs 32 Hole 15×110 front, 12×148 rear hub 6-bolt, XD RIMS E13 LG1 Enduro Race / 29” x 30MM Front / 27.5” x 35MM Rear / Boost SPOKES E13 TIRES Front: Maxxis Minion DHR II 29 x 2.60” // Rear: Maxxis Rekon+ 27.5 x 2.80” DRIVETRAIN
SHIFTERS Sram NX Eagle 12-speed REAR DERAILLEUR Sram NX Eagle 12-speed FRONT DERAILLEUR N/A CRANK Sram NX Eagle 12-speed / DUB / 32t / 170MM / Boost CASSETTE Sram PG 1230 Eagle 12sp / 11-50t CHAIN Sram NX Eagle 12-speed CHAIN GUIDE N/A BOTTOM BRACKET DUB BSA 73mm Bottom Bracket (Threaded) COMPONENTS
SADDLE WTB Silverado Sport SEATPOST INTENSE Recon Dropper 31.6MM / 125MM SM / 150MM MD-LG/ 170MM XL
(Frame Size Specific)HANDLEBAR INTENSE Recon Alloy 780MM STEM INTENSE Recon 45MM HEADSET INTENSE Tapered BRAKESET Shimano M520 Front (Four Piston) 180mm Rotors / Shimano M500 Rear (Two Piston) 180mm Rotors GRIPS INTENSE *Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH) LOW SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 580.3 mm/ 22.9″ 610.4 mm/ 24″ 638.7 mm/ 25.2″ 675.2 mm/ 26.6″ C: STACK 616.5 mm / 24.27″ 617 mm / 24.29″ 626.5 mm / 24.7″ 645.2 mm/ 25.4″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 334.6 mm/ 13.17″ 334.6 mm/ 13.17″ 334.6 mm/ 13.17″ 334.6 mm/ 13.17″ F: BB DROP 24.2 mm/ 0.95″ 24.5 mm/ 0.96″ 24.7 mm/ 0.97″ 25 mm/ 0.99″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 65.1˚ 65.1˚ 65.1˚ 65.1˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.1˚ 74.1˚ 74.1˚ 74.1˚ J: STANDOVER HEIGHT 805.6 mm/ 31.7″ 804.9 mm/ 31.7″ 809 mm/ 31.85″ 818 mm/ 32.2″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1167.8 mm/ 46″ 1197 mm/ 47.2″ 1226.9 mm/ 48.3″ 1264.8 mm/ 49.83″ GEOMETRY (MM / INCH) LOWER SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 582.5 mm/ 22.9″ 612.7 mm/ 24.1″ 641 mm/ 25.2″ 677.6 mm/ 26.68″ C: STACK 620.6 mm/ 24.4″ 621.3 mm/ 24.46″ 630.9 mm / 24.8″ 649.8 mm/ 25.6″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 327.2 mm/ 12.9″ 326.8 mm/ 12.9″ 326.8 mm/ 12.9″ 326.8 mm/ 12.9″ F: BB DROP 31.56 mm/ 1.24″ 31.95 mm/ 1.26″ 32.3 mm/ 1.27″ 32.8 mm/ 1.3″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 64.5˚ 64.5˚ 64.5˚ 64.5˚ I: SEAT TUBE ANGLE (EFFECTIVE) 73.5˚ 73.5˚ 73.5˚ 73.5˚ J: STANDOVER HEIGHT 799.9 mm/ 31.5″ 799.9 mm/ 31.5″ 803 mm/ 31.6″ 812.5 mm/ 32″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1168.7 mm/ 46″ 1198.7 mm/ 47.2″ 1227.71 mm/ 48.3″ 1265.7 mm/ 49.83″ -
INTENSE PRIMER S – PRO BUILD
TRUE TO THE TRAIL. THE INTENSE PRIMER S IS AN AGGRESSIVE AND INNOVATIVE TRAIL BIKE WITH STAGGERED 29″ FRONT AND 27.5+” REAR WHEELS.
FOR MORE AGGRESSIVE TRAIL RIDERS THAT ARE LOOKING FOR A FIRMER AND MORE RESPONSIVE SET-UP, THE NEW INTENSE PRIMER S DELIVERS WHEN IT COMES TO ALL-ROUND TRAIL AND ENDURO RIDING PERFORMANCE. FEATURING ALL OF THE BENEFITS OF THE INTENSE PRIMER, THE S MODEL BOASTS AN INNOVATIVE 279 WHEEL SET-UP, WITH A 29” WHEEL IN THE FRONT FOR EASY ROLLING OVER TOUGH TERRAIN, WHILST ITS 27.5” REAR WHEEL OFFERS MAXIMUM MANOEUVRABILITY AND TRACTION WHEN FIRING DOWN THE TRAILS. THE PRIMER S IS LIGHT FOR ENJOYABLE CLIMBING, BUT FAST AND AGGRESSIVE FOR THE CHALLENGING DESCENTS.
Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new fully-carbon frame, designed utilizing the very latest technologies and specifically tailored for each wheel-sizes with a hands-on, passionate approach. Complimenting the new frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is ideal for long climbs and chunky descents.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 150mm/140mm WHEEL SIZE: 27.5+” Rear / 29″ Front BUILD WEIGHT (TUBELESS, NO PEDALS, SIZE MEDIUM)
13,46kg FRAME WEIGHT: NA HT ANGLE: 65.1 ̊ / 64.5 ̊ REACH: 420mm / 16.5″ (Small) // 450mm / 17.72″ (Medium) // 475mm / 18.7″ (Large) // 505mm / 19.9″ (XL) PRO BUILD SPECIFICATIONS
FRAME
- PRIMER S “279” Trail Monocoque Carbon Frame
- Optimized Layup Carbon fiber
- Carbon top link, Titanium hardware, Internal shift, dropper post and brake routing
- ISCG05 mounts, Flak guard armor
FORK
Fox Factory 36 / FIT4 / 150MM / Boost / Quick Release Axle / 51mm Offset
SHOCK
Fox Factory DPX2 / 210MM x 50MM / 3-position (Open, Trail, Lock-out)
WHEELSET
WHEELS E13 LG1 Enduro Race / 29” x 30MM Front / 27.5” x 35MM Rear / Boost HUBS LG1 Race SL hubs 32 Hole 15×110 front, 12×148 rear hub 6-bolt, XD RIMS E13 LG1 Enduro Race / 29” x 30MM Front / 27.5” x 35MM Rear / Boost SPOKES E13 TIRES Front: Maxxis Minion DHR II 29 x 2.60” // Rear: Maxxis Rekon+ 27.5 x 2.80” DRIVETRAIN
SHIFTERS Sram GX Eagle 12-speed REAR DERAILLEUR Sram X01 Eagle 12-speed FRONT DERAILLEUR N/A CRANK Tru-Vativ Stylo Alloy 6K Eagle 12sp / DUB / 32t / 170MM / Boost CASSETTE Sram XG 1295 Eagle 12-speed 10-50t CHAIN Sram GX Eagle 12-speed CHAIN GUIDE N/A BOTTOM BRACKET DUB BSA 73mm Bottom Bracket (Threaded) COMPONENTS
SADDLE Fabric Scoop Radius Elite SEATPOST Fox Factory Transfer 31.6MM / 125MM SM / 150MM MD-LG / 175MM XL (Frame Size Specific) HANDLEBAR Intense Recon Carbon 780MM STEM Intense Recon Elite 50MM HEADSET Cane Creek 40 / ZS44-EC49 BRAKESET Shimano XT M8020 Front (Four Piston) 180mm Rotors / Shimano XT M8000 Rear (Two Piston) 180mm Rotors GRIPS Intense *Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH) LOW SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 580.3 mm/ 22.9″ 610.4 mm/ 24″ 638.7 mm/ 25.2″ 675.2 mm/ 26.6″ C: STACK 616.5 mm / 24.27″ 617 mm / 24.29″ 626.5 mm / 24.7″ 645.2 mm/ 25.4″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 334.6 mm/ 13.17″ 334.6 mm/ 13.17″ 334.6 mm/ 13.17″ 334.6 mm/ 13.17″ F: BB DROP 24.2 mm/ 0.95″ 24.5 mm/ 0.96″ 24.7 mm/ 0.97″ 25 mm/ 0.99″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 65.1˚ 65.1˚ 65.1˚ 65.1˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.1˚ 74.1˚ 74.1˚ 74.1˚ J: STANDOVER HEIGHT 805.6 mm/ 31.7″ 804.9 mm/ 31.7″ 809 mm/ 31.85″ 818 mm/ 32.2″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1167.8 mm/ 46″ 1197 mm/ 47.2″ 1226.9 mm/ 48.3″ 1264.8 mm/ 49.83″ GEOMETRY (MM / INCH) LOWER SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 408.4 mm/ 16.08″ 430.8 mm/ 16.96″ 451 mm/ 17.8″ 475.5 mm/ 18.7″ B: TOP TUBE LENGTH 582.5 mm/ 22.9″ 612.7 mm/ 24.1″ 641 mm/ 25.2″ 677.6 mm/ 26.68″ C: STACK 620.6 mm/ 24.4″ 621.3 mm/ 24.46″ 630.9 mm / 24.8″ 649.8 mm/ 25.6″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 327.2 mm/ 12.9″ 326.8 mm/ 12.9″ 326.8 mm/ 12.9″ 326.8 mm/ 12.9″ F: BB DROP 31.56 mm/ 1.24″ 31.95 mm/ 1.26″ 32.3 mm/ 1.27″ 32.8 mm/ 1.3″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 90 mm/ 3.54″ 100 mm/ 3.94″ 120 mm/ 4.7″ H: HEAD TUBE ANGLE 64.5˚ 64.5˚ 64.5˚ 64.5˚ I: SEAT TUBE ANGLE (EFFECTIVE) 73.5˚ 73.5˚ 73.5˚ 73.5˚ J: STANDOVER HEIGHT 799.9 mm/ 31.5″ 799.9 mm/ 31.5″ 803 mm/ 31.6″ 812.5 mm/ 32″ K: CHAINSTAY LENGTH 440 mm/ 17.3″” 440 mm/ 17.3″ 440 mm/ 17.3″ 440 mm/ 17.3″ L: WHEELBASE 1168.7 mm/ 46″ 1198.7 mm/ 47.2″ 1227.71 mm/ 48.3″ 1265.7 mm/ 49.83″ -
INTENSE PRIMER 27.5″ – FACTORY FRAME AND SHOCK
TRUE TO THE TRAIL. THE INTENSE PRIMER 275 IS AN AGILE TRAIL BIKE THAT INSPIRES CONFIDENCE IN A 27.5″ WHEEL SIZE.
EVOLVED FROM EXCELLENCE THE NEW INTENSE PRIMER IS TRUE TO THE TRAIL PROVIDING OUTSTANDING PERFORMANCE THAT STANDS OUT FROM THE CROWD THANKS TO A STRIKING DESIGN WHILE DELIVERING A CONFIDENCE-INSPIRING TRAIL RIDE EVERY TIME.
Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new fully-carbon frame, utilizing the latest technology and specifically tailored for each of the 27.5” and 29” wheel-sizes with a hands-on, passionate approach. Complimenting the frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is ideal for long climbs and chunky descents.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 150mm/140mm WHEEL SIZE: 27.5″ / 650b BUILD WEIGHT (NO PEDALS SIZE MEDIUM)
NA FRAME WEIGHT: NA HT ANGLE: 65.2 ̊ / 64.6 ̊ REACH: 420mm / 16.5″ (Small) // 450mm / 17.72″ (Medium) // 475mm / 18.7″ (Large) // 505mm / 19.9″ (XL) FACTORY FRAME & SHOCK SPECIFICATIONS
FRAME
- Primer 27.5” Trail Monocoque Carbon Frame
- Optimized Layup carbon fiber
- Carbon top link, Titanium hardware, Internal shift, dropper post and brake routing
- ISCG05 mounts, Flak guard armor, Threaded bottom bracket
SHOCK
Fox Factory Float DPX2 / 210MM x 50MM / 3-position (Open, Trail, Lock-out)
HARDWARE
Shock bolts, Upper & Lower Links, Rear Axle, Derailleur Hanger
*Parts/Spec are subject to change without notice.
FIND YOUR SIZING
GEOMETRY (MM / INCH) LOW SETTING
GEOMETRY NOTE: GEOMETRY TAKEN AT TOP OUT WITH 539MM AXLE TO CROWN LENGTH AND 44MM FORK OFFSET
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 395 mm/ 15.55″ 418.3 mm/ 16.5″ 444.3 mm/ 17.5″ 479.25 mm/ 18.9″ B: TOP TUBE LENGTH 565.9 mm/ 22.3″ 594.3 mm/ 23.4″ 622.4 mm/ 24.5″ 658.9 mm/ 25.9″ C: STACK 571.9 mm / 22.5″ 585.8 mm / 23.1″ 595.1 mm / 23.4″ 609 mm/ 23.98″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ F: BB DROP 8.48 mm/ 0.33″ 8.6 mm/ 0.34″ 8.78 mm/ 0.35″ 8.96 mm/ 0.35″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 105 mm/ 4.13″ 115 mm/ 4.53″ 130 mm/ 5.1″ H: HEAD TUBE ANGLE 65.2˚ 65.2˚ 65.2˚ 65.2˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.9˚ 74.9˚ 74.9˚ 74.9˚ J: STANDOVER HEIGHT 791.5 mm/ 31.2″ 791.5 mm/ 31.2″ 794.7 mm/ 31.3″” 803.6 mm/ 31.6″ K: CHAINSTAY LENGTH 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ L: WHEELBASE 1152.8 mm/ 45.4″ 1182.8 mm/ 46.6″ 1211.9 mm/ 47.7″ 1250 mm/ 49.2″ GEOMETRY (MM / INCH) LOWER SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 395 mm/ 15.55″ 418.3 mm/ 16.5″ 444.3 mm/ 17.5″ 479.25 mm/ 18.9″ B: TOP TUBE LENGTH 567.9 mm/ 22.4″
596.4 mm/ 23.5″ 624.5 mm/ 24.6″ 661.1 mm/ 26″ C: STACK 576.1 mm/ 22.68″ 590 mm/ 23.23″ 599.6 mm / 23.6″ 613.7 mm/ 24.2″ D: REACH 414 mm/ 16.3″ 444 mm/ 17.48″ 469 mm/ 18.46″ 499 mm/ 19.64″ E: BB HEIGHT 337.8 mm/ 13.3″ 337.6 mm/ 13.3″ 337.3 mm/ 13.3″ 337 mm/ 13.3″ F: BB DROP 15.9 mm/ 0.62″ 16.1 mm/ 0.63″ 16.4 mm/ 0.64″ 16.7 mm/ 0.66″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 105 mm/ 4.13″ 115 mm/ 4.53″ 130 mm/ 5.1″ H: HEAD TUBE ANGLE 64.6˚ 64.6˚ 64.6˚ 64.6˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.3˚ 74.3˚ 74.3˚ 74.3˚ J: STANDOVER HEIGHT 785.8 mm/ 30.9″ 785.5 mm/ 30.9″ 789 mm/ 31.1″ 797.9 mm/ 31.4″ K: CHAINSTAY LENGTH 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ L: WHEELBASE 1154.3 mm/ 45.5″ 1184.3 mm/ 46.6″ 1213.4 mm/ 47.8″ 1251.5 mm/ 49.27″ -
INTENSE PRIMER 27.5″ – EXPERT BUILD
TRUE TO THE TRAIL. THE INTENSE PRIMER 275 IS AN AGILE TRAIL BIKE THAT INSPIRES CONFIDENCE IN A 27.5″ WHEEL SIZE.
EVOLVED FROM EXCELLENCE THE NEW INTENSE PRIMER IS TRUE TO THE TRAIL PROVIDING OUTSTANDING PERFORMANCE THAT STANDS OUT FROM THE CROWD THANKS TO A STRIKING DESIGN WHILE DELIVERING A CONFIDENCE-INSPIRING TRAIL RIDE EVERY TIME.
Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new fully-carbon frame, utilizing the latest technology and specifically tailored for each of the 27.5” and 29” wheel-sizes with a hands-on, passionate approach. Complimenting the frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is ideal for long climbs and chunky descents.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 150mm/140mm WHEEL SIZE: 27.5″ / 650b BUILD WEIGHT (TUBELESS, NO PEDALS, SIZE MEDIUM)
13,72kg FRAME WEIGHT: NA HT ANGLE: 65.2 ̊ / 64.6 ̊ REACH: 420mm / 16.5″ (Small) // 450mm / 17.72″ (Medium) // 475mm / 18.7″ (Large) // 505mm / 19.9″ (XL) EXPERT BUILD SPECIFICATIONS
FRAME
- Primer 27.5” Trail Monocoque Carbon Frame
- Optimized Layup carbon fiber
- Carbon top link, Titanium hardware, Internal shift, dropper post and brake routing
- ISCG05 mounts, Flak guard armor
FORK
Fox Performance 34 / 150MM / Boost / Quick Release Axle / 44mm Offset
SHOCK
Fox Performance DPX2 / 210MM x 50MM / 3-position (Open, Trail, Lock-out)
WHEELSET
WHEELS E13 LG1 Enduro Race 30MM / Boost HUBS INTENSE Alloy hubs 32 Hole 15×110 front, 12×148 rear hub 6-bolt, XD RIMS E13 LG1 Enduro Race 30MM / Boost SPOKES E13 TIRES Front: Maxxis High Roller II 27.5″ x 2.50” // Rear: Maxxis Agressor 27.5x 2.30” DRIVETRAIN
SHIFTERS Sram NX Eagle 12-speed REAR DERAILLEUR Sram NX Eagle 12-speed FRONT DERAILLEUR N/A CRANK Sram NX Eagle 12sp / DUB / 32t / 170MM / Boost CASSETTE Sram PG 1230 Eagle 12sp / 11-50t CHAIN Sram NX Eagle 12-speed CHAIN GUIDE N/A BOTTOM BRACKET DUB BSA 73mm Bottom Bracket (Threaded) COMPONENTS
SADDLE WTB Silverado Sport SEATPOST INTENSE Recon Dropper 31.6MM / 125MM SM / 150MM MD-LG (Frame Size Specific) HANDLEBAR INTENSE Recon 780MM STEM INTENSE Recon 45MM HEADSET INTENSE Tapered BRAKESET Shimano M520 Front (Four Piston) 180mm Rotors / Shimano M500 Rear (Two Piston) 180mm Rotors GRIPS INTENSE *Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH) LOW SETTING
GEOMETRY NOTE: GEOMETRY TAKEN AT TOP OUT WITH 539MM AXLE TO CROWN LENGTH AND 44MM FORK OFFSET
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 395 mm/ 15.55″ 418.3 mm/ 16.5″ 444.3 mm/ 17.5″ 479.25 mm/ 18.9″ B: TOP TUBE LENGTH 565.9 mm/ 22.3″ 594.3 mm/ 23.4″ 622.4 mm/ 24.5″ 658.9 mm/ 25.9″ C: STACK 571.9 mm / 22.5″ 585.8 mm / 23.1″ 595.1 mm / 23.4″ 609 mm/ 23.98″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ F: BB DROP 8.48 mm/ 0.33″ 8.6 mm/ 0.34″ 8.78 mm/ 0.35″ 8.96 mm/ 0.35″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 105 mm/ 4.13″ 115 mm/ 4.53″ 130 mm/ 5.1″ H: HEAD TUBE ANGLE 65.2˚ 65.2˚ 65.2˚ 65.2˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.9˚ 74.9˚ 74.9˚ 74.9˚ J: STANDOVER HEIGHT 791.5 mm/ 31.2″ 791.5 mm/ 31.2″ 794.7 mm/ 31.3″” 803.6 mm/ 31.6″ K: CHAINSTAY LENGTH 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ L: WHEELBASE 1152.8 mm/ 45.4″ 1182.8 mm/ 46.6″ 1211.9 mm/ 47.7″ 1250 mm/ 49.2″ GEOMETRY (MM / INCH) LOWER SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 395 mm/ 15.55″ 418.3 mm/ 16.5″ 444.3 mm/ 17.5″ 479.25 mm/ 18.9″ B: TOP TUBE LENGTH 567.9 mm/ 22.4″
596.4 mm/ 23.5″ 624.5 mm/ 24.6″ 661.1 mm/ 26″ C: STACK 576.1 mm/ 22.68″ 590 mm/ 23.23″ 599.6 mm / 23.6″ 613.7 mm/ 24.2″ D: REACH 414 mm/ 16.3″ 444 mm/ 17.48″ 469 mm/ 18.46″ 499 mm/ 19.64″ E: BB HEIGHT 337.8 mm/ 13.3″ 337.6 mm/ 13.3″ 337.3 mm/ 13.3″ 337 mm/ 13.3″ F: BB DROP 15.9 mm/ 0.62″ 16.1 mm/ 0.63″ 16.4 mm/ 0.64″ 16.7 mm/ 0.66″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 105 mm/ 4.13″ 115 mm/ 4.53″ 130 mm/ 5.1″ H: HEAD TUBE ANGLE 64.6˚ 64.6˚ 64.6˚ 64.6˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.3˚ 74.3˚ 74.3˚ 74.3˚ J: STANDOVER HEIGHT 785.8 mm/ 30.9″ 785.5 mm/ 30.9″ 789 mm/ 31.1″ 797.9 mm/ 31.4″ K: CHAINSTAY LENGTH 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ L: WHEELBASE 1154.3 mm/ 45.5″ 1184.3 mm/ 46.6″ 1213.4 mm/ 47.8″ 1251.5 mm/ 49.27″ -
INTENSE PRIMER 27.5″ – PRO BUILD
TRUE TO THE TRAIL. THE INTENSE PRIMER 275 IS AN AGILE TRAIL BIKE THAT INSPIRES CONFIDENCE IN A 27.5″ WHEEL SIZE.
EVOLVED FROM EXCELLENCE THE NEW INTENSE PRIMER IS TRUE TO THE TRAIL PROVIDING OUTSTANDING PERFORMANCE THAT STANDS OUT FROM THE CROWD THANKS TO A STRIKING DESIGN WHILE DELIVERING A CONFIDENCE-INSPIRING TRAIL RIDE EVERY TIME.
Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new fully-carbon frame, utilizing the latest technology and specifically tailored for each of the 27.5” and 29” wheel-sizes with a hands-on, passionate approach. Complimenting the frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is ideal for long climbs and chunky descents.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 150mm/140mm WHEEL SIZE: 27.5″ / 650b BUILD WEIGHT (TUBELESS, NO PEDALS, SIZE MEDIUM)
13,09kg FRAME WEIGHT: NA HT ANGLE: 65.2 ̊ / 64.6 ̊ REACH: 420mm / 16.5″ (Small) // 450mm / 17.72″ (Medium) // 475mm / 18.7″ (Large) // 505mm / 19.9″ (XL) PRO BUILD SPECIFICATIONS
FRAME
- Primer 27.5” Trail Monocoque Carbon Frame
- Optimized Layup carbon fiber
- Carbon top link, Titanium hardware, Internal shift, dropper post and brake routing
- ISCG05 mounts, Flak guard armor
FORK
Fox Factory 34 / 150MM / Boost / Quick Release Axle / 44mm Offset
SHOCK
Fox Factory DPX2 / 210MM x 50MM / 3-position (Open, Trail, Lock-out)
WHEELSET
WHEELS E13 LG1 Enduro Race 30MM / Boost HUBS LG1 Race SL hubs 32 Hole 15×110 front, 12×148 rear hub 6-bolt, XD RIMS E13 LG1 Enduro Race 30MM / Boost SPOKES E13 TIRES Front: Maxxis High Roller II 27.5″ x 2.50” // Rear: Maxxis Agressor 27.5x 2.30” DRIVETRAIN
SHIFTERS Sram GX Eagle 12-speed REAR DERAILLEUR Sram X01 Eagle 12-speed FRONT DERAILLEUR N/A CRANK Tru-Vativ Stylo Alloy 6K Eagle 12sp / DUB / 32t / 170MM / Boost CASSETTE Sram XG 1295 Eagle 12-speed 10-50t CHAIN Sram GX Eagle 12-speed CHAIN GUIDE N/A BOTTOM BRACKET DUB BSA 73mm Bottom Bracket (Threaded) COMPONENTS
SADDLE Fabric Scoop Radius Elite SEATPOST Fox Factory Transfer 31.6MM / 125MM SM / 150MM MD-LG / 175MM XL (Frame Size Specific) HANDLEBAR Intense Recon Carbon 780MM STEM Intense Recon Elite 50MM HEADSET Cane Creek 40 / ZS44-EC49 BRAKESET Shimano XT M8020 Front (Four Piston) 180mm Rotors / Shimano XT M8000 Rear (Two Piston) 180mm Rotors GRIPS Intense *Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH) LOW SETTING
GEOMETRY NOTE: GEOMETRY TAKEN AT TOP OUT WITH 539MM AXLE TO CROWN LENGTH AND 44MM FORK OFFSET
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 395 mm/ 15.55″ 418.3 mm/ 16.5″ 444.3 mm/ 17.5″ 479.25 mm/ 18.9″ B: TOP TUBE LENGTH 565.9 mm/ 22.3″ 594.3 mm/ 23.4″ 622.4 mm/ 24.5″ 658.9 mm/ 25.9″ C: STACK 571.9 mm / 22.5″ 585.8 mm / 23.1″ 595.1 mm / 23.4″ 609 mm/ 23.98″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ F: BB DROP 8.48 mm/ 0.33″ 8.6 mm/ 0.34″ 8.78 mm/ 0.35″ 8.96 mm/ 0.35″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 105 mm/ 4.13″ 115 mm/ 4.53″ 130 mm/ 5.1″ H: HEAD TUBE ANGLE 65.2˚ 65.2˚ 65.2˚ 65.2˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.9˚ 74.9˚ 74.9˚ 74.9˚ J: STANDOVER HEIGHT 791.5 mm/ 31.2″ 791.5 mm/ 31.2″ 794.7 mm/ 31.3″” 803.6 mm/ 31.6″ K: CHAINSTAY LENGTH 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ L: WHEELBASE 1152.8 mm/ 45.4″ 1182.8 mm/ 46.6″ 1211.9 mm/ 47.7″ 1250 mm/ 49.2″ GEOMETRY (MM / INCH) LOWER SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 395 mm/ 15.55″ 418.3 mm/ 16.5″ 444.3 mm/ 17.5″ 479.25 mm/ 18.9″ B: TOP TUBE LENGTH 567.9 mm/ 22.4″
596.4 mm/ 23.5″ 624.5 mm/ 24.6″ 661.1 mm/ 26″ C: STACK 576.1 mm/ 22.68″ 590 mm/ 23.23″ 599.6 mm / 23.6″ 613.7 mm/ 24.2″ D: REACH 414 mm/ 16.3″ 444 mm/ 17.48″ 469 mm/ 18.46″ 499 mm/ 19.64″ E: BB HEIGHT 337.8 mm/ 13.3″ 337.6 mm/ 13.3″ 337.3 mm/ 13.3″ 337 mm/ 13.3″ F: BB DROP 15.9 mm/ 0.62″ 16.1 mm/ 0.63″ 16.4 mm/ 0.64″ 16.7 mm/ 0.66″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 105 mm/ 4.13″ 115 mm/ 4.53″ 130 mm/ 5.1″ H: HEAD TUBE ANGLE 64.6˚ 64.6˚ 64.6˚ 64.6˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.3˚ 74.3˚ 74.3˚ 74.3˚ J: STANDOVER HEIGHT 785.8 mm/ 30.9″ 785.5 mm/ 30.9″ 789 mm/ 31.1″ 797.9 mm/ 31.4″ K: CHAINSTAY LENGTH 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ L: WHEELBASE 1154.3 mm/ 45.5″ 1184.3 mm/ 46.6″ 1213.4 mm/ 47.8″ 1251.5 mm/ 49.27″ -
INTENSE PRIMER 27.5″ – ELITE BUILD
TRUE TO THE TRAIL. THE INTENSE PRIMER 275 IS AN AGILE TRAIL BIKE THAT INSPIRES CONFIDENCE IN A 27.5″ WHEEL SIZE.
EVOLVED FROM EXCELLENCE THE NEW INTENSE PRIMER IS TRUE TO THE TRAIL PROVIDING OUTSTANDING PERFORMANCE THAT STANDS OUT FROM THE CROWD THANKS TO A STRIKING DESIGN WHILE DELIVERING A CONFIDENCE-INSPIRING TRAIL RIDE EVERY TIME.
Tested and developed with some of the fastest athletes, the 2020 INTENSE Primer models feature a brand new fully-carbon frame, utilizing the latest technology and specifically tailored for each of the 27.5” and 29” wheel-sizes with a hands-on, passionate approach. Complimenting the frame is a new JS Trail Link system, which offers incredible performance on mixed terrain thanks to its ideal curve through the travel with a positive pedal platform, which ensures the INTENSE Primer is ideal for long climbs and chunky descents.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 150mm/140mm WHEEL SIZE: 27.5″ / 650b BUILD WEIGHT (TUBELESS,NO PEDALS, SIZE MEDIUM)
12,95kg FRAME WEIGHT: NA HT ANGLE: 65.2 ̊ / 64.6 ̊ REACH: 420mm / 16.5″ (Small) // 450mm / 17.72″ (Medium) // 475mm / 18.7″ (Large) // 505mm / 19.9″ (XL) ELITE BUILD SPECIFICATIONS
FRAME
- Primer 27.5” Trail Monocoque Carbon Frame
- Optimized Layup carbon fiber
- Carbon top link, Titanium hardware, Internal shift, dropper post and brake routing
- ISCG05 mounts, Flak guard armor
FORK
Fox Factory 34 / 150MM / Boost / Quick Release Axle / 44mm Offset
SHOCK
Fox Factory DPX2 / 210MM x 50MM / 3-position (Open, Trail, Lock-out)
WHEELSET
WHEELS E13 LG1 Enduro Race Carbon 30MM / Boost HUBS LG1 Race SL hubs 32 Hole 15×110 front, 12×148 rear hub 6-bolt, XD RIMS E13 LG1 Enduro Race Carbon 30MM / Boost SPOKES E13 TIRES Front: Maxxis High Roller II 27.5″ x 2.50” // Rear: Maxxis Agressor 27.5x 2.30” DRIVETRAIN
SHIFTERS Sram X01 Eagle 12-speed REAR DERAILLEUR Sram X01 Eagle 12-speed FRONT DERAILLEUR N/A CRANK Tru-Vativ Stylo Carbon Eagle 12-speed / DUB / 32t / 170MM / Boost CASSETTE Sram XG 1295 Eagle 12-speed 10-50t CHAIN Sram GX Eagle 12-speed CHAIN GUIDE N/A BOTTOM BRACKET DUB BSA 73mm Bottom Bracket (Threaded) COMPONENTS
SADDLE Fabric Scoop Radius Elite SEATPOST Fox Factory Transfer 31.6MM / 125MM SM / 150MM MD-LG / 175MM XL (Frame Size Specific) HANDLEBAR Intense Recon Carbon 780MM STEM Intense Recon Elite 50MM HEADSET Cane Creek 40 / ZS44-EC49 BRAKESET Shimano XT M8020 Front (Four Piston) 180mm Rotors / Shimano XT M8000 Rear (Two Piston) 180mm Rotors GRIPS Intense *Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH) LOW SETTING
GEOMETRY NOTE: GEOMETRY TAKEN AT TOP OUT WITH 539MM AXLE TO CROWN LENGTH AND 44MM FORK OFFSET
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 395 mm/ 15.55″ 418.3 mm/ 16.5″ 444.3 mm/ 17.5″ 479.25 mm/ 18.9″ B: TOP TUBE LENGTH 565.9 mm/ 22.3″ 594.3 mm/ 23.4″ 622.4 mm/ 24.5″ 658.9 mm/ 25.9″ C: STACK 571.9 mm / 22.5″ 585.8 mm / 23.1″ 595.1 mm / 23.4″ 609 mm/ 23.98″ D: REACH 420 mm/ 16.5″ 450 mm/ 17.72″ 475 mm/ 18.7″ 505 mm/ 19.9″ E: BB HEIGHT 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ 345 mm/ 13.59″ F: BB DROP 8.48 mm/ 0.33″ 8.6 mm/ 0.34″ 8.78 mm/ 0.35″ 8.96 mm/ 0.35″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 105 mm/ 4.13″ 115 mm/ 4.53″ 130 mm/ 5.1″ H: HEAD TUBE ANGLE 65.2˚ 65.2˚ 65.2˚ 65.2˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.9˚ 74.9˚ 74.9˚ 74.9˚ J: STANDOVER HEIGHT 791.5 mm/ 31.2″ 791.5 mm/ 31.2″ 794.7 mm/ 31.3″” 803.6 mm/ 31.6″ K: CHAINSTAY LENGTH 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ L: WHEELBASE 1152.8 mm/ 45.4″ 1182.8 mm/ 46.6″ 1211.9 mm/ 47.7″ 1250 mm/ 49.2″ GEOMETRY (MM / INCH) LOWER SETTING
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 395 mm/ 15.55″ 418.3 mm/ 16.5″ 444.3 mm/ 17.5″ 479.25 mm/ 18.9″ B: TOP TUBE LENGTH 567.9 mm/ 22.4″
596.4 mm/ 23.5″ 624.5 mm/ 24.6″ 661.1 mm/ 26″ C: STACK 576.1 mm/ 22.68″ 590 mm/ 23.23″ 599.6 mm / 23.6″ 613.7 mm/ 24.2″ D: REACH 414 mm/ 16.3″ 444 mm/ 17.48″ 469 mm/ 18.46″ 499 mm/ 19.64″ E: BB HEIGHT 337.8 mm/ 13.3″ 337.6 mm/ 13.3″ 337.3 mm/ 13.3″ 337 mm/ 13.3″ F: BB DROP 15.9 mm/ 0.62″ 16.1 mm/ 0.63″ 16.4 mm/ 0.64″ 16.7 mm/ 0.66″ G: HEAD TUBE LENGTH 90 mm/ 3.54″ 105 mm/ 4.13″ 115 mm/ 4.53″ 130 mm/ 5.1″ H: HEAD TUBE ANGLE 64.6˚ 64.6˚ 64.6˚ 64.6˚ I: SEAT TUBE ANGLE (EFFECTIVE) 74.3˚ 74.3˚ 74.3˚ 74.3˚ J: STANDOVER HEIGHT 785.8 mm/ 30.9″ 785.5 mm/ 30.9″ 789 mm/ 31.1″ 797.9 mm/ 31.4″ K: CHAINSTAY LENGTH 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ 432 mm/ 17.0″ L: WHEELBASE 1154.3 mm/ 45.5″ 1184.3 mm/ 46.6″ 1213.4 mm/ 47.8″ 1251.5 mm/ 49.27″ -
INTENSE 2020 SNIPER T FACTORY FRAME AND SHOCK
THE SNIPER T IS A GROUND-UP, DEDICATED, PEDALING MACHINE WITH 120MM TRAVEL. SHORT TRAVEL BIKES SHOULD DESCEND LIKE THEIR LONG TRAVEL SIBLINGS AND THAT’S WHAT WE HAVE WORKED TO CRAFT INTO THE SNIPER. THIS IS NO “TWITCHY XC BIKE”. WITH THE 29” WHEEL SIZE AND PROGRESSIVE XC/TRAIL GEOMETRY, YOU GET A STABLE RIDE THAT GOES WHERE YOU POINT IT.
Build up your dream endurance bike with the Sniper T Frame and Shock. Frame comes with Fox Factory Float DPS Shock, upper and lower link with Hardware, derailleur hanger, seat collar, all installed. (Does not include bottom bracket or headset)
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 120mm/120mm WHEEL SIZE: 29″ FRAME WEIGHT: 2,3Kg. (Size Medium) HT ANGLE: 66.5 ̊ REACH: 421 mm / 16.6” (Small) // 445 mm/ 17.5″ (Medium) //468 mm / 18.4” (Large) // 490 mm / 19.3” (XL)FACTORY FRAME AND SHOCK SPECIFICATIONS
FRAME
- Sniper 29 Optimized Layup Monocoque UD Carbon Front and Rear Triangle
- Carbon Top Link, alloy Lower Link, Internal Derailleur Routing
- Ti Hardware, w/ 148 x12 mm spacing, 120 mm travel
- Two (2) water bottle mounts
SHOCK
Fox Factory Float DPS, 165 x 45 mmHEADSET (NOT INCLUDED)
Integrated Headset, IS41-IS52/40*Parts/Spec are subject to change without notice.FIND YOUR SIZING
-
INTENSE 2020 SNIPER T EXPERT
THE SNIPER T IS A GROUND-UP, DEDICATED, PEDALING MACHINE WITH 120MM TRAVEL. SHORT TRAVEL BIKES SHOULD DESCEND LIKE THEIR LONG TRAVEL SIBLINGS AND THAT’S WHAT WE HAVE WORKED TO CRAFT INTO THE SNIPER. THIS IS NO “TWITCHY XC BIKE”. WITH THE 29” WHEEL SIZE AND PROGRESSIVE XC/TRAIL GEOMETRY, YOU GET A STABLE RIDE THAT GOES WHERE YOU POINT IT.
The Sniper T Expert build offers performance level components at an aggressive price point. Key standouts are Fox Performance suspension, a 12-speed NX Drivetrain, and a lightweight Ethirteen TRS+ wheelset.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torquewrench set and shock pump, precision tools to keep your new bike in peak performance.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 120mm/120mm WHEEL SIZE: 29″ FRAME WEIGHT: 2,3Kg. (Size Medium) HT ANGLE: 66.5 ̊ REACH: 421 mm / 16.6” (Small) // 445 mm/ 17.5″ (Medium) //468 mm / 18.4” (Large) // 490 mm / 19.3” (XL)EXPERT BUILD SPECIFICATIONS
FRAME
- Sniper 29 Optimized Layup Monocoque UD Carbon Front and Rear Triangle
- Carbon Top Link, alloy Lower Link, Internal Derailleur Routing
- Ti Hardware, w/ 148 x12 mm spacing, 120 mm travel
- Two (2) water bottle mounts
FORK
Fox Performance Float 34 Stepcast, 29″, 3-Position Adjust, GRIP, 51mm offset, 120mm, Boost Quick Release 110x15mm
SHOCK
Fox Performance Float DPS, 165 x 45 mm
WHEELSET
WHEELS 29″ E*thirteen TRS+ Alloy Wheels, 27mm inner width HUBS Intense, 110x15mm, 28 Hole Front / 148x12mm, XD, 28 Hole Rear RIMS 29″ E*thirteen TRS+ Alloy Wheels, 27mm inner width, 28-hole SPOKES DT Swiss Champion TIRES Maxxis 29×2.35 Forekaster Folding, 120 TPI, DC/EXO/TRDRIVETRAIN
SHIFTER Sram NX Eagle 12 speed REAR DERAILLEUR Sram NX Eagle 12 speed FRONT DERAILLEUR N/A CRANK Sram NX Eagle 12 speed, DUB, 32T, 175mm, Boost CASSETTE Sram PG 1230 Eagle 12-speed, 11-50T CHAIN Sram NX Eagle 12 speed CHAIN GUIDE BOTTOM BRACKET SRAM DUB Pressfit COMPONENTS
SADDLE WTB Silverado Sport w/ Cr-Mo Rails SEATPOST Intense Recon 31.6mm, 125mm Dropper (SM), 150mm Dropper (MD/LG), 170mm Dropper (XL) HANDLEBAR Intense Recon 760mm Alloy STEM Intense Recon 45mm HEADSET Cane Creek AER Integrated Headset, Aluminum Bearing Series, IS41-IS52/40 BRAKESET Shimano M500 Hydraulic Disk 180mm FR / 160mm RR GRIPS Intense Lock-on BIKE WEIGHT 26lbs 2oz (Size Medium) *Parts/Spec are subject to change without notice.
Maximum Recommended Rider Weight 215lbs
FIND YOUR SIZING
-
INTENSE 2020 SNIPER T PRO
The Sniper T Pro build offers the highest level Fox Factory suspension package, a SRAM drivetrain with XO1 derailluer, and a lightweight E*thirteen Alloy wheelset. A great all-around lightweight package at an aggressive price point.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torquewrench set and shock pump, precision tools to keep your new bike in peak performance.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 120mm/120mm WHEEL SIZE: 29″ FRAME WEIGHT: 2,3Kg. (Size Medium) HT ANGLE: 66.5 ̊ REACH: 421 mm / 16.6” (Small) // 445 mm/ 17.5″ (Medium) //468 mm / 18.4” (Large) // 490 mm / 19.3” (XL)PRO BUILD SPECIFICATIONS
FRAME
- Sniper 29 Optimized Layup Monocoque UD Carbon Front and Rear Triangle
- Carbon Top Link, alloy Lower Link, Internal Derailleur Routing
- Ti Hardware, w/ 148 x12 mm spacing, 10 mm travel
- Two (2) water bottle mounts
FORK
Fox Factory Float 34 Stepcast, 29″, 3-Position Adjust, FIT4, 51mm offset, 120mm, Boost Quick Release 110x15mm
SHOCK
Fox Factory Float DPS, 165 x 45 mm
WHEELSET
WHEELS 29″ E*thirteen TRS+ Alloy Wheels, 27mm inner width HUBS E*thirteen, 110x15mm, 28 Hole Front / 148x12mm, XD, 28 Hole Rear / Triple-sealed, fully machined aluminum hub w/6 degree engagement RIMS 29″ E*thirteen TRS+ Alloy Wheels, 27mm inner width SPOKES E*thirteen TIRES Maxxis 29×2.35 Forekaster Folding, 120 TPI, DC/EXO/TRDRIVETRAIN
SHIFTER Sram GX Eagle 12 speed REAR DERAILLEUR Sram X01 Eagle 12 speed FRONT DERAILLEUR N/A CRANK Sram Stylo Carbon Eagle 12 speed, DUB, 34T, 175mm, Boost CASSETTE Sram XG1275 Eagle 12 speed, 10-50T CHAIN Sram GX Eagle 12 speed CHAIN GUIDE BOTTOM BRACKET SRAM DUB Pressfit COMPONENTS
SADDLE Fabric Line Wide Elite w/ Cr-Mo Rails SEATPOST Kindshock Carbon LEV Ci 31.6mm, 125mm Dropper (SM), 150mm Dropper (MD/LG), 175mm Dropper (XL) HANDLEBAR Intense Recon 760mm Carbon STEM Intense Recon Elite 50mm HEADSET Tange Seiki Integrated Headset, IS41-IS52/40 BRAKESET Shimano XT M8000 Hydraulic Disk 180mm FR / 160mm RR GRIPS Intense Lock-on BIKE WEIGHT 25lbs 6oz (Size Medium) *Parts/Spec are subject to change without notice.
Maximum Recommended Rider Weight 215lbs
FIND YOUR SIZING
-
INTENSE 2020 SNIPER T ELITE
THE SNIPER T IS A GROUND-UP, DEDICATED, PEDALING MACHINE WITH 120MM TRAVEL. SHORT TRAVEL BIKES SHOULD DESCEND LIKE THEIR LONG TRAVEL SIBLINGS AND THAT’S WHAT WE HAVE WORKED TO CRAFT INTO THE SNIPER. THIS IS NO “TWITCHY XC BIKE”. WITH THE 29” WHEEL SIZE AND PROGRESSIVE XC/TRAIL GEOMETRY, YOU GET A STABLE RIDE THAT GOES WHERE YOU POINT IT.
The Sniper T Elite build offers the highest level Fox Factory suspension package, a SRAM drivetrain with XX1 derailluer, and a lightweight Ethirteen XCX Carbon wheelset. This provides a lightweight full carbon build, the ultimate in performance.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torquewrench set and shock pump, precision tools to keep your new bike in peak performance.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 120mm/120mm WHEEL SIZE: 29″ BIKE WEIGHT: (TUBELESS, NO PEDALS, SIZE MEDIUM)
11,39kg HT ANGLE: 66.5 ̊ REACH: 421 mm / 16.6” (Small) // 445 mm/ 17.5″ (Medium) //468 mm / 18.4” (Large) // 490 mm / 19.3” (XL)ELITE BUILD SPECIFICATIONS
FRAME
- Sniper 29 Optimized Layup Monocoque UD Carbon Front and Rear Triangle
- Carbon Top Link, alloy Lower Link, Internal Derailleur Routing
- Ti Hardware, w/ 148 x12 mm spacing, 120 mm travel
- Two (2) water bottle mounts
FORK
Fox Factory Float 34 Stepcast, 29″, 3-Position Adjust, FIT4, 51mm offset, 120mm, Boost Quick Release 110x15mm
SHOCK
Fox Factory Float DPS, 165 x 45 mm
WHEELSET
WHEELS 29″ E*thirteen XCX Carbon, 28mm inner width HUBS E*thirteen, 110x15mm, 28 Hole Front / 148x12mm, XD, 28 Hole Rear / Triple-sealed, fully machined aluminum hub w/6 degree engagement RIMS 29″ E*thirteen XCX Carbon, 28mm inner width, 28 hole SPOKES E*thirteen TIRES Maxxis 29×2.35 Forekaster Folding, 120 TPI, DC/EXO/TRDRIVETRAIN
SHIFTER Sram X01 Eagle 12 speed REAR DERAILLEUR Sram XX1 Eagle 12 speed FRONT DERAILLEUR N/A CRANK Sram Stylo Carbon Eagle 12 speed, DUB, 34T, 175mm, Boost CASSETTE Sram XG1295 X01 Eagle 12 speed, 10-50T CHAIN Sram GX Eagle 12 speed CHAIN GUIDE BOTTOM BRACKET SRAM DUB Pressfit COMPONENTS
SADDLE Fabric Line Wide Elite w/ Cr-Mo Rails SEATPOST Kindshock Carbon LEV Ci 31.6mm, 125mm Dropper (SM), 150mm Dropper (MD/LG), 175mm Dropper (XL) HANDLEBAR Intense Recon 760mm Carbon STEM Intense Recon Elite 50mm HEADSET Tange Seiki Integrated Headset, IS41-IS52/40 BRAKESET Shimano XT M8000 Hydraulic Disk 180mm FR / 160mm RR GRIPS Intense Lock-on BIKE WEIGHT 25lbs (Size Medium) *Parts/Spec are subject to change without notice.
FIND YOUR SIZING
-
INTENSE 2020 SNIPER XC FACTORY FRAME AND SHOCK
DESIGNED FOR ENDURANCE. THE SNIPER XC WAS DEVELOPED TO BE ONE OF THE LIGHTEST CROSS COUNTRY BIKE FRAMES ON THE MARKET, COUPLED WITH A RIDICULOUSLY COMFORTABLE GEOMETRY.
Build up your dream endurance race bike with the Sniper XC Frame and Shock. The Sniper XC is our lightest weight frame. Frame comes with Fox Factory Float DPS Shock, upper and lower link with Hardware, derailleur hanger, seat collar, all installed. (Does not include bottom bracket or headset)
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 100mm/100mm WHEEL SIZE: 29″ FRAME WEIGHT: 1,9Kg. (Size Medium) HT ANGLE: 67.5 ̊ REACH: 421 mm / 16.6” (Small) // 445 mm/ 17.5″ (Medium) //468 mm / 18.4” (Large) // 490 mm / 19.3” (XL)SNIPER XC FACTORY FRAME AND SHOCK SPECS
FRAME
- Sniper 29 Optimized Layup Monocoque UD Carbon Front and Rear Triangle
- Carbon Top Link, magnesium Lower Link, Internal Derailleur Routing
- Ti Hardware, w/ 148 x12 mm spacing, 100 mm travel
- Two (2) water bottle mounts
SHOCK
Fox Factory Float DPS, 165 x 40 mm
HEADSET (NOT INCLUDED)
Integrated Headset, IS41-IS52/40
*Parts/Spec are subject to change without notice.
FIND YOUR SIZING
-
INTENSE 2020 SNIPER XC EXPERT BUILD
DESIGNED FOR ENDURANCE. THE SNIPER XC WAS DEVELOPED TO BE ONE OF THE LIGHTEST CROSS COUNTRY BIKE FRAMES ON THE MARKET, COUPLED WITH A RIDICULOUSLY COMFORTABLE GEOMETRY.
WHAT IS AN INTENSE EXPERT BUILD?
The Sniper XC Expert build offers performance level components at an aggressive price point. Key standouts are Fox Performance suspension, a 12-speed NX Drivetrain, and a lightweight Stans Crest wheelset.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torquewrench set and shock pump, precision tools to keep your new bike in peak performance.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 100mm/100mm WHEEL SIZE: 29″ FRAME WEIGHT: 1,9Kg. (Size Medium) HT ANGLE: 67.5 ̊ REACH: 421 mm / 16.6” (Small) // 445 mm/ 17.5″ (Medium) //468 mm / 18.4” (Large) // 490 mm / 19.3” (XL)EXPERT BUILD SPECIFICATIONS
FRAME
- Sniper 29 Optimized Layup Monocoque UD Carbon Front and Rear Triangle
- Carbon Top Link, magnesium Lower Link, Internal Derailleur Routing
- Ti Hardware, w/ 148 x12 mm spacing, 100 mm travel
- Two (2) water bottle mounts
FORK
Fox Performance Float 32 Stepcast, 29″, 3-Position Adjust, GRIP, 44mm offset, 100mm, Boost 110x15mm, Kabolt Axle
SHOCK
Fox Performance Float DPS, 165 x 40 mm
WHEELSET
WHEELS 29″ Stans Crest Alloy Wheels, 23mm inner width HUBS Intense, 110x15mm, 28 Hole Front / 148x12mm, XD, 28 Hole Rear RIMS 29″ Stans Crest Alloy Wheels, 23mm inner width, 32 hole SPOKES DT Swiss Champion TIRES Maxxis 29×2.25 Rekon Folding, 120 TPI, DC/EXO/TRDRIVETRAIN
SHIFTER Sram NX Eagle 12 speed REAR DERAILLEUR Sram NX Eagle 12 speed FRONT DERAILLEUR N/A CRANK Sram NX Eagle 12 speed, DUB, 32T, 175mm, Boost CASSETTE Sram PG 1230 Eagle 12-speed, 11-50T CHAIN Sram NX Eagle 12 speed CHAIN GUIDE BOTTOM BRACKET SRAM DUB Pressfit COMPONENTS
SADDLE WTB Silverado Sport w/ Cr-Mo Rails SEATPOST Intense Recon 31.6mm, 125mm Dropper (SM), 150mm Dropper (MD/LG), 170mm Dropper (XL) HANDLEBAR Intense Recon Flat 760mm Alloy STEM Intense Recon 45mm HEADSET Cane Creek AER Integrated Headset, Aluminum Bearing Series, IS41-IS52/40 BRAKESET Shimano M500 Hydraulic Disk 160mm FR / 160mm RR GRIPS Intense Nano Foam BIKE WEIGHT 24.1 lbs (Size Medium) *Parts/Spec are subject to change without notice.
Maximum Recommended Rider Weight 215lbs
FIND YOUR SIZING
-
INTENSE 2020 SNIPER XC PRO
DESIGNED FOR ENDURANCE. THE SNIPER XC WAS DEVELOPED TO BE ONE OF THE LIGHTEST CROSS COUNTRY BIKE FRAMES ON THE MARKET, COUPLED WITH A RIDICULOUSLY COMFORTABLE GEOMETRY.
WHAT IS A SNIPER XC PRO BUILD?
The Sniper XC Pro build offers the highest level Fox Factory suspension package, a SRAM drivetrain with XO1 derailluer, and a lightweight DT Swiss Alloy wheelset. A great all-around lightweight package at an aggressive price point.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torquewrench set and shock pump, precision tools to keep your new bike in peak performance.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 100mm/100mm WHEEL SIZE: 29″ FRAME WEIGHT: 1,9Kg. (Size Medium) HT ANGLE: 67.5 ̊ REACH: 421 mm / 16.6” (Small) // 445 mm/ 17.5″ (Medium) //468 mm / 18.4” (Large) // 490 mm / 19.3” (XL)PRO BUILD SPECIFICATIONS
FRAME
- Sniper 29 Optimized Layup Monocoque UD Carbon Front and Rear Triangle
- Carbon Top Link, magnesium Lower Link, Internal Derailleur Routing
- Ti Hardware, w/ 148 x12 mm spacing, 100 mm travel
- Two (2) water bottle mounts
FORK
Fox Factory Float 32 Stepcast, 29″, 3 Position Adjust, FIT4, 44mm offset, 100mm, Boost Kabolt 110x15mm
SHOCK
Fox Factory Float DPS, 165 x 40 mm
WHEELSET
WHEELS 29″ DT Swiss X1700 Alloy, 25mm inner width HUBS DT Swiss Classic, Centerlock, 110x15mm, 28 hole front / 148x12mm, XD, 28 hole rear RIMS 29″ DT Swiss X1700 Alloy, 25mm inner width, 28 hole SPOKES DT Swiss TIRES Maxxis 29×2.25 Rekon Folding, 120 TPI, DC/EXO/TRDRIVETRAIN
SHIFTER Sram GX Eagle 12 speed REAR DERAILLEUR Sram X01 Eagle 12 speed FRONT DERAILLEUR N/A CRANK Sram Stylo Carbon Eagle 12 speed, DUB, 34T, 175mm, Boost CASSETTE Sram XG1275 Eagle 12 speed, 10-50T CHAIN Sram GX Eagle 12 speed CHAIN GUIDE BOTTOM BRACKET SRAM DUB Pressfit COMPONENTS
SADDLE Fabric Line Wide Elite w/ Cr-Mo Rails SEATPOST Kindshock Carbon LEV Ci 31.6mm, 125mm Dropper (SM), 150mm Dropper (MD/LG), 175mm Dropper (XL) HANDLEBAR Intense Recon Flat 760mm Carbon STEM Intense Recon Elite 50mm HEADSET Tange Seiki Integrated Headset, IS41-IS52/40 BRAKESET Shimano XT M8000 Hydraulic Disk, Centerlock, 160mm FR / 160mm RR GRIPS Intense Nano Foam BIKE WEIGHT 23lbs 6oz (Size Medium) *Parts/Spec are subject to change without notice.
Maximum Recommended Rider Weight 215lbs
FIND YOUR SIZING
-
INTENSE 2020 SNIPER XC ELITE
DESIGNED FOR ENDURANCE. THE SNIPER XC WAS DEVELOPED TO BE ONE OF THE LIGHTEST CROSS COUNTRY BIKE FRAMES ON THE MARKET, COUPLED WITH A RIDICULOUSLY COMFORTABLE GEOMETRY.
WHAT IS A SNIPER XC ELITE BUILD?
The Sniper XC Elite build offers the highest level Fox Factory suspension package, a SRAM drivetrain with XX1 derailluer, and a lightweight Ethirteen XCX Carbon wheelset. A high performance all-around lightweight package at an aggressive price point.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torquewrench set and shock pump, precision tools to keep your new bike in peak performance.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 100mm/100mm WHEEL SIZE: 29″ FRAME WEIGHT: 1,9Kg. (Size Medium) HT ANGLE: 67.5 ̊ REACH: 421 mm / 16.6” (Small) // 445 mm/ 17.5″ (Medium) //468 mm / 18.4” (Large) // 490 mm / 19.3” (XL)ELITE BUILD SPECIFICATIONS
FRAME
- Sniper 29 Optimized Layup Monocoque UD Carbon Front and Rear Triangle
- Carbon Top Link, magnesium Lower Link, Internal Derailleur Routing
- Ti Hardware, w/ 148 x12 mm spacing, 100 mm travel
- Two (2) water bottle mounts
FORK
Fox Factory Float 32 Stepcast, 29″, 3 Position Adjust, FIT4, 44mm offset, 100mm, Boost Kabolt 110x15mm
SHOCK
Fox Factory Float DPS, 165 x 40 mm
WHEELSET
WHEELS 29″ E*thirteen XCX Carbon, 24mm inner width HUBS E*thirteen, 110x15mm, 28 Hole Front / 148x12mm, XD, 28 Hole Rear / Triple-sealed, fully machined aluminum hub w/6 degree engagement RIMS 29″ E*thirteen XCX Carbon, 24mm inner width, 28 hole SPOKES E*thirteen TIRES Maxxis 29×2.25 Rekon Folding, 120 TPI, DC/EXO/TRDRIVETRAIN
SHIFTER Sram X01 Eagle 12 speed REAR DERAILLEUR Sram XX1 Eagle 12speed FRONT DERAILLEUR N/A CRANK Sram Stylo Carbon Eagle 12 speed, DUB, 34T, 175mm, Boost CASSETTE Sram XG1295 X01 Eagle 12 speed, 10-50T CHAIN Sram GX Eagle 12 speed CHAIN GUIDE BOTTOM BRACKET SRAM DUB Pressfit COMPONENTS
SADDLE Fabric Line Wide Elite w/ Cr-Mo Rails SEATPOST Kindshock Carbon LEV Ci 31.6mm, 125mm Dropper (SM), 150mm Dropper (MD/LG), 175mm Dropper (XL) HANDLEBAR Intense Recon Flat 760mm Carbon STEM Intense Recon Elite 50mm HEADSET Tange Seiki Integrated Headset, IS41-IS52/40 BRAKESET Shimano XT M8000 Hydraulic Disk 160mm FR / 160mm RR GRIPS Intense Nano Foam BIKE WEIGHT 23lbs (Size Medium) *Parts/Spec are subject to change without notice.
Maximum Recommended Rider Weight 215lbs
FIND YOUR SIZING
-
INTENSE TAZER EXPERT BUILD
THE DEVELOPMENT OF THE TAZER WAS REALLY SIMILAR TO THE VERY FIRST BIKE INTENSE EVER BUILT. IN THE EARLY 90’S, WHEN FOUNDER JEFF STEBER FIRST RODE AN MTB, HE IMMEDIATELY HAD DOZENS OF IDEAS ABOUT CHANGES AND TWEAKS HE COULD MAKE ON THE BIKE TO IMPROVE IT’S PERFORMANCE AND APPEARANCE. EVENTUALLY, AFTER MAKING SO MANY CHANGES, HE DECIDED TO MAKE A BIKE FROM THE GROUND-UP, AND INTENSE WAS BORN. NOT UNLIKE THAT EXPERIENCE, JEFF HAS TAKEN WHAT HE’S LEARNED FROM RIDING E-BIKES AND APPLIED HIS OWN TWEAKS AND INNOVATIONS. HIS GOAL WAS TO MAKE AN E-BIKE THAT DIDN’T FEEL CUMBERSOME, HAD A SEAMLESS PEDAL-TO-POWER TRANSITION AND DELIVERED A TRUE MOUNTAIN BIKE EXPERIENCE.
THE EXPERT BUILD TAZER OFFERS THE SAME GREAT FRAME PLATFORM AS OUR PRO BUILD AND COMES WITH A SHIMANO E7000 MOTOR AND FOX PERFORMANCE SUSPENSION.
The development of the Tazer was really similar to the very first bike INTENSE ever built. In the early 90’s, when Founder Jeff Steber first rode an MTB, he immediately had dozens of ideas about changes and tweaks he could make on the bike to improve it’s performance and appearance. Eventually, after making so many changes, he decided to make a bike from the ground-up, and Intense was born.
Not unlike that experience, Jeff has taken what he’s learned from riding E-bikes and applied his own tweaks and innovations. His goal was to make an E-bike that didn’t feel cumbersome, had a seamless pedal-to-power transition and delivered a true mountain bike experience.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 160mm/155mm WHEEL SIZE: 29″ Front / 27.5+” Rear BUILD WEIGHT (NO PEDALS)
47lbs 7oz MOTOR: Shimano Steps E7000 25KM/H 250W / 60Nm max torque HT ANGLE: 64.9 ̊ REACH: 425 mm/ 16.7″ (Small) // 450 mm/ 17.7″ (Medium) // 475 mm/ 18.7″ (Large) EXPERT BUILD SPECIFICATIONS
FRAME
- Tazer Optimized Carbon 29” Front and 275+ Rear Triangle
- Enduro link Pivot System, Downtube Flak Guard Armor
- Internal Derailleur, Brake, Dropper Post, and Display Unit Routing
- ISCG 05 Mount, 150mm travel
FORK
Fox Performance Float E-Bike 36, 29″, GRIP, 160mm Travel, 51mm offset, Boost 110x15mm
SHOCK
Fox Performance Float DPX2, Trunnion Mount, EVOL, 3-Position Lever 185x55mm (Size XL comes with Fox Performance Float X2)
WHEELSET
WHEELS Front: 29” DT Swiss H1900 Hybrid 30mm Inner width, 110x15mm, Centerlock, Including Tubeless Valve & Rim Tape Rear: 27.5” DT Swiss H1900 Hybrid 35mm Inner width, 148x12mm, Centerlock, Including Tubeless Valve & Rim Tape
HUBS DT Swiss 370 Hybrid, Centerlock RIMS Front: 29” DT Swiss H1900 Hybrid 30mm Inner width Rear: 27.5” DT Swiss H1900 Hybrid 35mm Inner width
SPOKES DT hybrid 1 TIRES Front: Maxxis 29X2.60, Minion DHR II, 120TPI, 3CMAXX TERRA/EXO+/TR
Rear: Maxxis 27.5X2.8, Minion DHR II, 120TPI, 3CMAXX TERRA/EXO+/TRDRIVETRAIN
SHIFTER Shimano SLX, 11-speed REAR DERAILLEUR Shimano SLX, 11-speed FRONT DERAILLEUR N/A CRANK Shimano XT 165mm, 34T CASSETTE Shimano SLX 11-42, 11-speed CHAIN Shimano E-bike, 11 speed CHAIN GUIDE E-Thirteen Chain Guide COMPONENTS
SADDLE WTB Silverado Sport w/ Cr-Mo Rails SEATPOST Intense Recon Dropper, 31.6mm, w/Raceface Lever (125mm Travel for size Small/150mm Travel Size Med-Large/170mm Size XL) HANDLEBAR Intense Recon Alloy 780mm STEM Intense Recon 45mm HEADSET Intense Tapered ZS49/ZS56 BRAKESET Shimano M520 4-Piston Hydraulic Disc, 203mm Front and Rear GRIPS Intense Lock On ELECTRONICS/MOTOR
MOTOR Shimano Steps E7000 25KM/H 250W BATTERY BT-E8010, FOR STEPS, 504Wh. Battery lock w/2 keys MODE SWITCH SW-E6000 DISPLAY Shimano Steps 4 cm (1.39 in) LCD black-white display with handlebar mount, Bluetooth Compatible *Parts/Spec are subject to change without notice.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH)
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 394 mm/ 15.5″
419 mm/ 16.5″
445 mm/ 17.5″
470 mm/ 18.5″
B: TOP TUBE LENGTH 577 mm/ 22.7″
605 mm/ 23.8″
633.4 mm/ 25″
663.4 mm/ 26.2″
C: STACK 610 mm/ 24″
623 mm / 24.54″
632 mm/ 24.9″
632 mm/ 24.9″
D: REACH 425 mm/ 16.7″
450 mm/ 17.7″
475 mm/ 18.7″
505 mm/ 19.9″
E: BB HEIGHT 347 mm/ 13.65″
347 mm/ 13.65″
347 mm/ 13.65″
347 mm/ 13.65″
F: BB DROP 12 mm/ 0.47″ 12 mm/ 0.47″ 12 mm/ 0.47″ 12 mm/ 0.47″ G: HEAD TUBE LENGTH 100 mm/ 3.94″
115 mm/ 4.5”
125 mm/ 4.9″
125 mm/ 4.9″
H: HEAD TUBE ANGLE 64.9 ̊
64.9 ̊
64.9 ̊
64.9 ̊
I: SEAT TUBE ANGLE 75.4 ̊
75.4 ̊
75.4 ̊
75.4 ̊
J: STANDOVER HEIGHT 806 mm/ 31.7″
814.1 mm/ 32″
822 mm/ 32.4″
832.7 mm/ 32.8″
K: CHAINSTAY LENGTH 450 mm/ 17.7″
450 mm/ 17.7″
450 mm/ 17.7″
450 mm/ 17.7″
L: WHEELBASE 1199.4 mm/ 47.2″
1230 mm/ 48.4″
1260 mm/ 49.6″
1289.7 mm/ 50.8″
DRIVETRAIN
SHIFTERS Shimano SLX, 11-speed REAR DERAILLEUR Shimano SLX, 11-speed FRONT DERAILLEUR N/A CRANK Shimano XT 165mm, 34T CASSETTE Shimano SLX 11-42, 11-speed CHAIN Shimano E-bike, 11 speed CHAIN GUIDE E-Thirteen Chain Guide COMPONENTS
SADDLE Fabric Scoop Radius Elite w/ Cr-Mo Rails SEATPOST Fox Factory Series Transfer, 31.6mm, 150mm travel w/Raceface Lever (125mm Travel for size Small) HANDLEBAR Intense Recon Alloy 31.8mm – 780mm STEM Intense Recon, 45mm HEADSET Cane Creek 40 Series, ZS44/EC49.40 BRAKESET Shimano XT 4-Piston Hydraulic Disc, 203mm Front and Rear GRIPS Intense Dual Density Lock-On ELECTRONICS/MOTOR
MOTOR Shimano Steps E8000 25KM/H 250W BATTERY BT-E8010, FOR STEPS, 504Wh. Battery lock w/2 keys MODE SWITCH SW-E6000 DISPLAY Shimano Steps LCD, Bluetooth Compatible. *Parts/Spec are subject to change without notice.
GEOMETRY (MM / INCH)
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 394 mm/ 15.5″
419 mm/ 16.5″
445 mm/ 17.5″
457 mm/ 18”
B: TOP TUBE LENGTH 577 mm/ 22.7″
605 mm/ 23.8″
633.4 mm/ 25″
634 mm/ 25”
C: STACK 610 mm/ 24″
623 mm / 24.54″
632 mm/ 24.9″
607 mm/ 23.9”
D: REACH 425 mm/ 16.7″
413 mm/ 16.3”450 mm/ 17.7″
-
INTENSE TAZER PRO BUILD
THE DEVELOPMENT OF THE TAZER WAS REALLY SIMILAR TO THE VERY FIRST BIKE INTENSE EVER BUILT. IN THE EARLY 90’S, WHEN FOUNDER JEFF STEBER FIRST RODE AN MTB, HE IMMEDIATELY HAD DOZENS OF IDEAS ABOUT CHANGES AND TWEAKS HE COULD MAKE ON THE BIKE TO IMPROVE IT’S PERFORMANCE AND APPEARANCE. EVENTUALLY, AFTER MAKING SO MANY CHANGES, HE DECIDED TO MAKE A BIKE FROM THE GROUND-UP, AND INTENSE WAS BORN. NOT UNLIKE THAT EXPERIENCE, JEFF HAS TAKEN WHAT HE’S LEARNED FROM RIDING E-BIKES AND APPLIED HIS OWN TWEAKS AND INNOVATIONS. HIS GOAL WAS TO MAKE AN E-BIKE THAT DIDN’T FEEL CUMBERSOME, HAD A SEAMLESS PEDAL-TO-POWER TRANSITION AND DELIVERED A TRUE MOUNTAIN BIKE EXPERIENCE.
The Pro Build Tazer eBike offers a competitive spec with our optimized layup frame. We’ve carefully selected and tested each component to provide an exception ride experience at an aggressive price.
The development of the Tazer was really similar to the very first bike INTENSE ever built. In the early 90’s, when Founder Jeff Steber first rode an MTB, he immediately had dozens of ideas about changes and tweaks he could make on the bike to improve it’s performance and appearance. Eventually, after making so many changes, he decided to make a bike from the ground-up, and Intense was born.Not unlike that experience, Jeff has taken what he’s learned from riding electric bikes and applied his own tweaks and innovations. His goal was to make an eBike that didn’t feel cumbersome, had a seamless pedal-to-power transition and delivered a true mountain bike experience.
All bikes come pre-built and tuned through Intense Cycles authorized mechanics and will arrive to you with minimum assembly.
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
QUICK STANDOUTS
TRAVEL (FRONT/REAR): 160mm/155mm WHEEL SIZE: 29″ Front / 27.5+” Rear BUILD WEIGHT (NO PEDALS)
21,5 kg. MOTOR: Shimano Steps E8000 25KM/H 250W HT ANGLE: 64.9 ̊ REACH: 425 mm/ 16.7″ (Small) // 450 mm/ 17.7″ (Medium) // 475 mm/ 18.7″ (Large) PRO BUILD SPECIFICATIONS
FRAME
- TAZER Optimized Carbon 29” Front and 275+ Rear Triangle
- Enduro link Pivot System, Downtube Flak Guard Armor
- Internal Derailleur, Brake, Dropper Post, and Display Unit Routing
- ISCG 05 Mount, 150mm travel.
FORK
FOX FACTORY E-BIKE 36 FLOAT, Kashima, 160 mm, FIT GRIP2, 15QRx110 BOOST, 51mm Offset
SHOCK
FOX FACTORY FLOAT DPX2, Trunnion Mount, EVOL, 3-Position Lever 185x55mm
WHEELSETWHEELS Front: 29” DT Swiss H1700 Hybrid 30mm Inner width, 110×15 MM INCLUDING VALVE & RIM Tape Rear: 27.5” DT Swiss H1700 Hybrid 35mm Inner width, 148x12MM REAR, 6 BOLT, INCLUDING VALVE & Rim Tape
HUBS DT Swiss 350 Hybrid, Centerlock RIMS Front: 29” DT Swiss H1700 Hybrid 30mm Inner width, 110×15 MM INCLUDING VALVE & RIM Tape Rear: 27.5” DT Swiss H1700 Hybrid 35mm Inner width, 148x12MM REAR, 6 BOLT, INCLUDING VALVE & Rim Tape
SPOKES DT hybrid 1 TIRES Front: 29X2.60, MINION DHR II, FOLDABLE, 120TPI, 3CMAXX TERRA/EXO+/TR Rear: 27.5X2.8, MINION DHR II, FOLDABLE, 120TPI, 3CMAXX TERRA/EXO+/TR
DRIVETRAINSHIFTERS Shimano SLX, 11-speed REAR DERAILLEUR Shimano SLX, 11-speed FRONT DERAILLEUR N/A CRANK Shimano XT 165mm, 34T CASSETTE Shimano SLX 11-42, 11-speed CHAIN Shimano E-bike, 11 speed CHAIN GUIDE E-Thirteen Chain Guide
COMPONENTSSADDLE Fabric Scoop Radius Elite w/ Cr-Mo Rails SEATPOST Fox Factory Series Transfer, 31.6mm, 150mm travel w/Raceface Lever (125mm Travel for size Small) HANDLEBAR Intense Recon Alloy 31.8mm – 780mm STEM Intense Recon, 45mm HEADSET Cane Creek 40 Series, ZS44/EC49.40 BRAKESET Shimano XT 4-Piston Hydraulic Disc, 203mm Front and Rear GRIPS Intense Dual Density Lock-On
ELECTRONICS/MOTOR
MOTOR Shimano Steps E8000 25KM/H 250W BATTERY BT-E8010, FOR STEPS, 504Wh. Battery lock w/2 keys MODE SWITCH SW-E6000 DISPLAY Shimano Steps LCD, Bluetooth Compatible. *Parts/Spec are subject to change without notice.
GIFT WITH YOUR NEW BIKE
Included with each complete bike is an Intense Cycles branded torque wrench set and shock pump, precision tools to keep your new bike in peak performance.
FIND YOUR SIZING
GEOMETRY (MM / INCH)
SIZE Small Medium Large Extra Large A: SEAT TUBE LENGTH 394 mm/ 15.5″
419 mm/ 16.5″
445 mm/ 17.5″
470 mm/ 18.5″
B: TOP TUBE LENGTH 577 mm/ 22.7″
605 mm/ 23.8″
633.4 mm/ 25″
663.4 mm/ 26.2″
C: STACK 610 mm/ 24″
623 mm / 24.54″
632 mm/ 24.9″
632 mm/ 24.9″
D: REACH 425 mm/ 16.7″
450 mm/ 17.7″
475 mm/ 18.7″
505 mm/ 19.9″
E: BB HEIGHT 347 mm/ 13.65″
347 mm/ 13.65″
347 mm/ 13.65″
347 mm/ 13.65″
F: BB DROP 12 mm/ 0.47″ 12 mm/ 0.47″ 12 mm/ 0.47″ 12 mm/ 0.47″ G: HEAD TUBE LENGTH 100 mm/ 3.94″
115 mm/ 4.5”
125 mm/ 4.9″
125 mm/ 4.9″
H: HEAD TUBE ANGLE 64.9 ̊
64.9 ̊
64.9 ̊
64.9 ̊
I: SEAT TUBE ANGLE 75.4 ̊
75.4 ̊
75.4 ̊
75.4 ̊
J: STANDOVER HEIGHT 806 mm/ 31.7″
814.1 mm/ 32″
822 mm/ 32.4″
832.7 mm/ 32.8″
K: CHAINSTAY LENGTH 450 mm/ 17.7″
450 mm/ 17.7″
450 mm/ 17.7″
450 mm/ 17.7″
L: WHEELBASE 1199.4 mm/ 47.2″
1230 mm/ 48.4″
1260 mm/ 49.6″
1289.7 mm/ 50.8″
-
Pro 4 Boost 148mm rear hub
Key Features
- 10, 11 and 12 speed compatible
- Sealed Stainless Steel cartridge bearings
- Hub shell machined from a single forged aluminium billet
- Standard 6 bolt disc fitting
- 4 Pawl ratchet system with 44 tooth engagement (8.2 deg)
- Larger spoke flange to enable stiffer wheel builds
- Unsurpassed reliability
- Available in 148 x 12mm thru axle
Pro 4 Boost 148mm rear hub Tech Specs >
- Now available with Shimano MicroSpline freehub body
- Specifically designed for 148 x 12mm frames with hub flanges move outboard 3mm compared to standard Pro 4 rear hub increasing complete wheel stiffness
- Available Black, Silver, Red, Blue, Purple and Orange
- Available in 28, 32 and 36 hole drillings
- Machined from forged 2014 T6 Aluminium billet
- Conversions available for 141 x QR and 148 x 12mm
- Supplied with freehubs to suit 10/11spd Shimano, 12 Speed MicroSpline, Sram XD or Hope cassette
- Aluminium or steel Shimano freehub body options
- Weight: 311g (36 hole, Shimano)
Pro 4 Rear Freehub Exploded View
Pro 4 148 Boost Rear Hub Exploded View
Pro 4 Rear MicroSpline Freehub Exploded View
2016UPDATEDHOPEHUBSSPOKEOFFSETANDPCD
How to convert a Pro 4 Rear hub
How to service a Pro 4 Rear hub
-
27.5er mtb MX735EN 35mm wide 23.5mm deep carbon rim – 440g
This enduro 27.5er carbon rim is enhanced version base on trail 35mm wide rim, more stiff, durable and long lasting, which is perfect for all mountain and enduro mountain bicycle.
Rim Specs:
Item: MX735EN Use: Enduro, AM Size: 27.5″ / 650b Rim type: Hookless Material: Toray T700 carbon fiber Tubeless ready: Yes Weight: 440g+/-20 Weave: UD / 3K / 6K – [see different carbon weaves] Max weight limit: 125kgs Finish: Matte / Gloss Inner width:
29mm Depth:
23.5mm Outer width: 35mm ERD: 560mm Tire size: 2.35″~2.5″ Brake type: Disc Spoke hole:
16 / 18 / 20 / 24 / 28 / 32 / 36 Assembly hole diameter: 8.5mm Valve hole diameter: 6.5mm Max spoke tension: 140kgf (recommended 110-130kgf) Max / Min tire pressure:
60psi (4.1bar) / 25psi (1.75bar) Cycling tire pressure: 40psi / 2.76bar (recommended max) *Angled holes allows the nipple to pull straight in line with the spoke for reduced stress. This results in fewer broken spokes and nipples. * For unique hole drilling and alternate options, please contact us for special orders.
* If you have any special requirement like rim in 3k twill, 6k, marble finish surface, custom painting etc., please contact us at sales@carbonalbike.com. Since we manufacture every single one of the rim in our own factory, we have the ability to get you our rims with custom finishes, hole counts, or graphics.
* Carbonal warrants its products to be free from manufacturing defects for a period of 5-years after original date of purchase.
And we understand that accidents and damage can happen, if in case of bad luck, Carbonal supports you by offering replacement product with 15% discount on the current price of products within 2 years.
Features:
One Piece Molding, a rim is made by one piece long carbon fiber, no wrinkles, to make the strength of rim is the strongest.
Super Lightweight Tec, constructed with premium Toray T700 carbon fiber, precise layup, achieve a most lightweight.
Hookless rim bead, more straight and smooth side walls, tire can touch rim walls fully. More durable and impact resistance compared to a clincher rim. 
Double Triangle Design, rim cross-sections more smooth, make rim stronger and stabilized structure. -
29er mtb MX935EN 35mm wide 23.5mm deep carbon rim – 460g
This enduro 29er carbon rim is enhanced version base on trail 35mm wide rim, more stiff, durable and long lasting, which is perfect for all mountain and enduro mountain bicycle.
Rim Specs:
Item: MX935EN Use: Enduro, AM Size: 29″ Rim type: Hookless Material: Toray T700 carbon fiber Tubeless ready: Yes Weight: 460g±20 Weave: UD / 3K / 6K Max weight limit: 125kgs Finish: Matte / Gloss Width:
35mm external, 29mm internal Depth:
23.5mm Spoke hole drilling:
Center, 7 deg ERD: 598mm Tire size: 2.35″~2.5″ Brake type: Disc Spoke hole:
18 / 20 / 24 / 28 / 32 / 36 Assembly hole diameter: 8.5mm Valve hole diameter: 6.5mm Max spoke tension: 140kgf (recommended 110-130kgf) Max / Min tire pressure:
60psi (4.1bar) / 25psi (1.75bar) Cycling tire pressure: 40psi / 2.76bar (recommended max) *Angled holes allows the nipple to pull straight in line with the spoke for reduced stress. This results in fewer broken spokes and nipples. * For unique hole drilling and alternate options, please contact us for special orders.
* If you have any special requirement like rim in 3k twill, 6k, marble finish surface, custom painting etc., please contact us at sales@carbonalbike.com. Since we manufacture every single one of the rim in our own factory, we have the ability to get you our rims with custom finishes, hole counts, or graphics.
* Carbonal warrants its products to be free from manufacturing defects for a period of 5-years after original date of purchase.
And we understand that accidents and damage can happen, if in case of bad luck, Carbonal supports you by offering replacement product
with 15% discount on the current price of products within 2 years.
Features:
